KasperCalc: MIL-HDBK-5 Appendix B and C - Alloy and Specification Index

Appendix Contents

Navigate to Section

Chapter 1 — General Chapter 2 — Steel Chapter 3 — Aluminum Chapter 4 — Magnesium Chapter 5 — Titanium Chapter 6 — Heat-Resistant Alloys Chapter 7 — Miscellaneous Alloys Chapter 8 — Structural Joints Appendix B & C — Alloy & Spec Index

Disclaimer

For reference use only. The formulas, graphs, and values herein are provided in good faith for general engineering guidance. Please verify all data against MIL-HDBK-5J or the applicable superseding document (MMPDS).

B.0Alloy Index

Appendix B lists every alloy in MIL-HDBK-5J by alloy name, with its product form, the material specification and the handbook section that covers it. Click a section number to open that section. Press Ctrl+F to find an alloy.

Open this page of MIL-HDBK-5

Appendix B.0. Alloy Index
Alloy Name	Form	Specification	Section
250	Bar	AMS 6512	2.5.1
250	Sheet and Plate	AMS 6520	2.5.1
280	Sheet and Plate	AMS 6521	2.5.1
280	Bar	AMS 6514	2.5.1
354.0	Casting	AMS-A-21180	3.9.1
355.0	Permanent Mold Casting	AMS 4281	3.9.2
356.0	Sand Casting	AMS 4217	3.9.4
356.0	Investment Casting	AMS 4260	3.9.4
356.0	Permanent Mold Casting	AMS 4284	3.9.4
359.0	Casting	AMS-A-21180	3.9.8
2014	Bare Sheet and Plate	AMS 4028	3.2.1
2014	Bare Sheet and Plate	AMS 4029	3.2.1
2014	Bar and Rod, Rolled or Cold Finished	AMS 4121	3.2.1
2014	Forging	AMS 4133	3.2.1
2014	Extrusion	AMS 4153	3.2.1
2014	Forging	AMS-A-22771	3.2.1
2014	Extruded Bar, Rod and Shapes	AMS-QQ-A-200/2	3.2.1
2014	Rolled or Drawn Bar, Rod and Shapes	AMS-QQ-A-225/4	3.2.1
2014	Clad Sheet and Plate	AMS-QQ-A-250/3	3.2.1
2014	Forging	AMS-QQ-A-367	3.2.1
2017	Bar and Rod, Rolled or Cold-Finished	AMS 4118	3.2.2
2017	Rolled Bar and Rod	AMS-QQ-A-225/5	3.2.2
2024	Bare Sheet and Plate	AMS 4035	3.2.3
2024	Bare Sheet and Plate	AMS 4037	3.2.3
2024	Tubing, Hydraulic, Seamless, Drawn	AMS 4086	3.2.3
2024	Bar and Rod, Rolled or Cold-Finished	AMS 4120	3.2.3
2024	Extrusion	AMS 4152	3.2.3
2024	Extrusion	AMS 4164	3.2.3
2024	Extrusion	AMS 4165	3.2.3
2024	Extruded Bar, Rod and Shapes	AMS-QQ-A-200/3	3.2.3
2024	Rolled or Drawn Bar, Rod and Wire	AMS-QQ-A-225/6	3.2.3
2024	Bare Sheet and Plate	AMS-QQ-A-250/4	3.2.3
2024	Clad Sheet and Plate	AMS-QQ-A-250/5	3.2.3
2024	Tubing	AMS-WW-T-700/3	3.2.3
2025	Die Forging	AMS 4130	3.2.4
2026	Extruded Bars, Rods, and Profiles	AMS 4338	3.2.5
2090	Sheet	AMS 4251	3.2.6
2124	Plate	AMS 4101	3.2.7
2124	Plate	AMS-QQ-A-250/29	3.2.7
2219	Sheet and Plate	AMS 4031	3.2.8
2219	Hand Forging	AMS 4144	3.2.8
2219	Extrusion	AMS 4162	3.2.8
2219	Extrusion	AMS 4163	3.2.8
2219	Sheet and Plate	AMS-QQ-A-250/30	3.2.8
2297	Plate	AMS 4330	3.2.9
2424	Sheet (Clad)	AMS 4270	3.2.10
2424	Sheet (Bare)	AMS 4273	3.2.10
2519	Plate	MIL-DTL-46192	3.2.11
2524	Sheet and Plate	AMS 4296	3.2.12
2618	Die and Hand Forgings	AMS 4132	3.2.13
2618	Die Forging	AMS-A-22771	3.2.13
2618	Forging	AMS-QQ-A-367	3.2.13
4130	Bar and Forging	AMS 6348	2.3.1
4130	Sheet, Strip and Plate	AMS 6350	2.3.1
4130	Sheet, Strip and Plate	AMS 6351	2.3.1
4130	Tubing	AMS 6361	2.3.1
4130	Tubing	AMS 6362	2.3.1
4130	Bar and Forging	AMS 6370	2.3.1
4130	Tubing	AMS 6371	2.3.1
4130	Tubing	AMS 6373	2.3.1
4130	Tubing	AMS 6374	2.3.1
4130	Bar and Forging	AMS 6528	2.3.1
4130	Sheet, Strip and Plate	AMS-S-18729	2.3.1
4130	Bar and Forging	AMS-S-6758	2.3.1
4130	Tubing	AMS-T-6736	2.3.1
4135	Sheet, Strip and Plate	AMS 6352	2.3.1
4135	Tubing	AMS 6365	2.3.1
4135	Tubing	AMS 6372	2.3.1
4135	Tubing	AMS-T-6735	2.3.1
4140	Bar and Forging	AMS 6349	2.3.1
4140	Tubing	AMS 6381	2.3.1
4140	Bar and Forging	AMS 6382	2.3.1
4140	Sheet, Strip and Plate	AMS 6395	2.3.1
4140	Bar and Forging	AMS 6529	2.3.1
4140	Bar and Forging	AMS-S-5626	2.3.1
4340	Sheet, Strip and Plate	AMS 6359	2.3.1
4340	Bar and Forging	AMS 6414	2.3.1
4340	Tubing	AMS 6414	2.3.1
4340	Bar and Forging	AMS 6415	2.3.1
4340	Tubing	AMS 6415	2.3.1
4340	Sheet, Strip and Plate	AMS 6454	2.3.1
4340	Bar and Forging	AMS-S-5000	2.3.1
5052	Sheet and Plate	AMS 4015	3.5.1
5052	Sheet and Plate	AMS 4016	3.5.1
5052	Sheet and Plate	AMS 4017	3.5.1
5052	Sheet and Plate	AMS-QQ-A-250/8	3.5.1
5083	Bare Sheet and Plate	AMS 4056	3.5.2
5083	Extruded Bar, Rod and Shapes	AMS-QQ-A-200/4	3.5.2
5083	Bare Sheet and Plate	AMS-QQ-A-250/6	3.5.2
5086	Extruded Bar, Rod and Shapes	AMS-QQ-A-200/5	3.5.3
5086	Sheet and Plate	AMS-QQ-A-250/7	3.5.3
5454	Extruded Bar, Rod and Shapes	AMS-QQ-A-200/6	3.5.4
5454	Sheet and Plate	AMS-QQ-A-250/10	3.5.4
5456	Extruded Bar, Rod and Shapes	AMS-QQ-A-200/7	3.5.5
5456	Sheet and Plate	AMS-QQ-A-250/9	3.5.5
6013	Sheet (T4)	AMS 4347	3.6.1
6013	Sheet (T6)	AMS 4216	3.6.1
6061	Sheet and Plate	AMS 4025	3.6.2
6061	Sheet and Plate	AMS 4026	3.6.2
6061	Sheet and Plate	AMS 4027	3.6.2
6061	Tubing Seamless, Drawn	AMS 4080	3.6.2
6061	Tubing Seamless, Drawn	AMS 4082	3.6.2
6061	Bar and Rod, Rolled or Cold Finished	AMS 4115	3.6.2
6061	Bar and Rod, Cold Finished	AMS 4116	3.6.2
6061	Bar and Rod, Rolled or Cold Finished	AMS 4117	3.6.2
6061	Forging	AMS 4127	3.6.2
6061	Extrusion	AMS 4160	3.6.2
6061	Extrusion	AMS 4161	3.6.2
6061	Extrusion	AMS 4172	3.6.2
6061	Hand Forging	AMS 4248	3.6.2
6061	Forging	AMS-A-22771	3.6.2
6061	Extruded Rod, Bar Shapes and Tubing	AMS-QQ-A-200/8	3.6.2
6061	Rolled Bar, Rod and Shapes	AMS-QQ-A-225/8	3.6.2
6061	Extruded Rod, Bars and Shapes	AMS 4150	3.6.2
6061	Extruded Rod, Bars and Shapes	AMS 4173	3.6.2
6061	Sheet and Plate	AMS-QQ-A-250/11	3.6.2
6061	Forging	AMS-QQ-A-367	3.6.2
6061	Tubing Seamless, Drawn	AMS-WW-T-700/6	3.6.2
6151	Die Forging	AMS 4125	3.6.3
6151	Forging	AMS-A-22771	3.6.3
7010	Plate	AMS 4204	3.7.1
7010	Plate	AMS 4205	3.7.1
7040	Plate	AMS 4211	3.7.2
7049	Forging	AMS-QQ-A-367	3.7.3
7049	Forging	AMS 4111	3.7.3
7049	Extrusion	AMS 4157	3.7.3
7049	Forging	AMS-A-2271	3.7.3
7049	Plate	AMS 4200	3.7.3
7050	Bare Plate	AMS 4050	3.7.4
7050	Die Forging	AMS 4107	3.7.4
7050	Hand Forging	AMS 4108	3.7.4
7050	Bare Plate	AMS 4201	3.7.4
7050	Die Forging	AMS 4333	3.7.4
7050	Extruded Shape	AMS 4340	3.7.4
7050	Extruded Shape	AMS 4341	3.7.4
7050	Extruded Shape	AMS 4342	3.7.4
7050	Forging	AMS-A-22771	3.7.4
7055	Plate	AMS 4206	3.7.5
7055	Extrusion	AMS 4337	3.7.5
7055	Extrusion	AMS 4324	3.7.5
7055	Extrusion	AMS 4336	3.7.5
7075	Bare Sheet and Plate	AMS 4044	3.7.6
7075	Bare Sheet and Plate	AMS 4045	3.7.6
7075	Clad Sheet and Plate	AMS 4049	3.7.6
7075	Bare Plate	AMS 4078	3.7.6
7075	Bar and Rod, Rolled or Cold Finished	AMS 4122	3.7.6
7075	Bar and Rod, Rolled or Cold Finished	AMS 4123	3.7.6
7075	Bar and Rod, Rolled or Cold Finished	AMS 4124	3.7.6
7075	Forging	AMS 4126	3.7.6
7075	Die Forging	AMS 4141	3.7.6
7075	Forging	AMS 4147	3.7.6
7075	Bar and Rod, Rolled or Cold Finished	AMS 4186	3.7.6
7075	Bar and Rod, Rolled or Cold Finished	AMS 4187	3.7.6
7075	Forging	AMS-A-22771	3.7.6
7075	Extruded Bar, Rod and Shapes	AMS-QQ-A-200/11, 15	3.7.6
7075	Rolled or Drawn Bar and Rod	AMS-QQ-A-225/9	3.7.6
7075	Bare Sheet and Plate	AMS-QQ-A-250/12, 24	3.7.6
7075	Clad Sheet and Plate	AMS-QQ-A-250/13, 25	3.7.6
7075	Forging	AMS-QQ-A-367	3.7.6
7149	Forging	AMS 4320	3.7.3
7149	Forging	AMS-A-2271	3.7.3
7149	Extrusion	ASM 4343	3.7.3
7150	Bare Plate	AMS 4252 (T7751)	3.7.7
7150	Bare Plate	AMS 4306 (T6151)	3.7.7
7150	Extrusion	AMS 4307 (T61511)	3.7.7
7150	Extrusion	AMS 4345 (T77511)	3.7.7
7175	Die Forging	AMS 4148 (T66)	3.7.8
7175	Die and Hand Forging	AMS 4149 (T74)	3.7.8
7175	Hand Forging	AMS 4179 (T7452)	3.7.8
7175	Extrusion	AMS 4344 (T73511)	3.7.8
7175	Forging	AMS-A-22771	3.7.8
7249	Hand Forging	AMS 4334	3.7.9
7475	Bare Sheet	AMS 4084 (T61)	3.7.10
7475	Bare Sheet	AMS 4085 (T761)	3.7.10
7475	Bare Plate	AMS 4089 (T7651)	3.7.10
7475	Bare Plate	AMS 4090 (T651)	3.7.10
7475	Clad Sheet	AMS 4100 (T761)	3.7.10
7475	Bare Plate	AMS 4202 (T7351)	3.7.10
7475	Clad Sheet	AMS 4207 (T61)	3.7.10
8630	Bar and Forging	AMS 6280	2.3.1
8630	Tubing	AMS 6281	2.3.1
8630	Sheet, Strip and Plate	AMS-S-18728	2.3.1
8630	Bar and Forging	AMS-S-6050	2.3.1
8630	Sheet, Strip and Plate	AMS 6350	2.3.1
8735	Tubing	AMS 6282	2.3.1
8735	Bar and Forging	AMS 6320	2.3.1
8735	Sheet, Strip and Plate	AMS 6357	2.3.1
8740	Bar and Forging	AMS 6322	2.3.1
8740	Tubing	AMS 6323	2.3.1
8740	Bar and Forging	AMS 6327	2.3.1
8740	Sheet, Strip and Plate	AMS 6358	2.3.1
8740	Bar and Forging	AMS-S-6049	2.3.1
15-5PH	Investment Casting	AMS 5400	2.6.7
15-5PH	Bar, Forging, Ring and Extrusion (CEVM)	AMS 5659	2.6.7
15-5PH	Sheet, Strip and Plate (CEVM)	AMS 5862	2.6.7
17-4PH	Investment Casting (H1100)	AMS 5342	2.6.9
17-4PH	Investment Casting (H1000)	AMS 5343	2.6.9
17-4PH	Investment Casting (H900)	AMS 5344	2.6.9
17-4PH	Sheet, Strip and Plate	AMS 5604	2.6.9
17-4PH	Bar, Forging and Ring	AMS 5643	2.6.9
17-7PH	Plate, Sheet and Strip	AMS 5528	2.6.10
2024-T3 ARAMID Fiber Reinforced	Sheet Laminate	AMS 4254	7.5.1
280 (300)	Bar	AMS 6514	2.5.1
280 (300)	Sheet and Plate	AMS 6521	2.5.1
300M (0.42C)	Bar and Forging	AMS 6257	2.3.1
300M (0.42C)	Tubing	AMS 6257	2.3.1
300M (0.42C)	Bar and Forging	AMS 6419	2.3.1
300M (0.42C)	Tubing	AMS 6419	2.3.1
300M (0.4C)	Bar and Forging	AMS 6417	2.3.1
300M (0.4C)	Tubing	AMS 6417	2.3.1
4130 - N	Tubing	AMS 6360	2.3.1
4330V	Bar and Forging	AMS 6411	2.3.1
4330V	Tubing	AMS 6411	2.3.1
4330V	Bar and Forging	AMS 6427	2.3.1
4330V	Tubing	AMS 6427	2.3.1
4335V	Bar and Forging	AMS 6429	2.3.1
4335V	Tubing	AMS 6429	2.3.1
4335V	Bar and Forging	AMS 6430	2.3.1
4335V	Tubing	AMS 6430	2.3.1
4335V	Sheet, Strip and Plate	AMS 6433	2.3.1
4335V	Sheet, Strip and Plate	AMS 6435	2.3.1
5Cr-Mo-V	Sheet, Strip and Plate	AMS 6437	2.4.1
5Cr-Mo-V	Bar and Forging (CEVM)	AMS 6487	2.4.1
5Cr-Mo-V	Bar and Forging	AMS 6488	2.4.1
7475-T761 ARAMID Fiber Reinforced	Sheet Laminate	AMS 4302	7.5.2
9Ni-4Co-0.20C	Sheet, Strip and Plate	AMS 6523	2.4.2
9Ni-4Co-0.20C	Sheet, Strip and Plate	AMS 6524	2.4.3
9Ni-4Co-0.20C	Bar and Forging, Tubing	AMS 6526	2.4.3
A201.0	Casting (T7 Temper)	AMS-A-21180	3.8.1
A-286	Sheet, Strip and Plate	AMS 5525	6.2.1
A-286	Bar, Forging, Tubing and Ring	AMS 5731	6.2.1
A-286	Bar, Forging, Tubing and Ring	AMS 5732	6.2.1
A-286	Bar, Forging and Tubing	AMS 5734	6.2.1
A-286	Bar, Forging and Tubing	AMS 5737	6.2.1
A356.0	Casting	AMS 4218	3.9.5
A356.0	Casting	AMS-A-21180	3.9.5
A357.0	Casting	AMS-A-21180	3.9.6
AerMet 100	Bar and Forging	AMS 6478	2.5.3
AerMet 100	Bar and Forging	AMS 6532	2.5.3
AF1410	Bar and Forging	AMS 6527	2.5.2
AISI 1025	Sheet, Strip, and Plate	AMS 5046	2.2.1
AISI 1025	Bar	ASTM A 108	2.2.1
AISI 1025	Sheet and Strip	AMS-S-7952	2.2.1
AISI 1025	Tubing	AMS 5077	2.2.1
AISI 1025 - N	Seamless Tubing	AMS 5075	2.2.1
AISI 1025 - N	Tubing	AMS 5077	2.2.1
AISI 1025 - N	Tubing	AMS-T-5066	2.2.1
AISI 301	Sheet and Strip	AMS 5517	2.7.1
AISI 301	Sheet and Strip	AMS 5518	2.7.1
AISI 301	Sheet and Strip	AMS 5519	2.7.1
AISI 301	Sheet, Strip and Plate	AMS 5901	2.7.1
AISI 301	Sheet and Strip (175 ksi)	AMS 5902	2.7.1
AISI 302	Sheet, Strip and Plate	AMS 5516	2.7.1
AISI 302	Sheet and Strip (125 ksi)	AMS 5903	2.7.1
AISI 302	Sheet and Strip (150 ksi)	AMS 5904	2.7.1
AISI 302	Sheet and Strip (175 ksi)	AMS 5905	2.7.1
AISI 302	Sheet and Strip (185 ksi)	AMS 5906	2.7.1
AISI 304	Sheet and Strip	AMS 5913	2.7.1
AISI 304	Sheet, Strip and Plate (125 ksi)	AMS 5910	2.7.1
AISI 304	Sheet and Strip (150 ksi)	AMS 5911	2.7.1
AISI 304	Sheet and Strip (175 ksi)	AMS 5912	2.7.1
AISI 304	Sheet and Strip (185 ksi)	AMS 5913	2.7.1
AISI 316	Sheet and Strip	AMS 5524	2.7.1
AISI 316	Sheet, Strip and Plate (125 ksi)	AMS 5907	2.7.1
AM100A	Investment Casting	AMS 4455	4.3.1
AM100A	Permanent Mold Casting	AMS 4483	4.3.1
AM-350	Sheet and Strip	AMS 5548	2.6.1
AM-355	Sheet and Strip	AMS 5547	2.6.2
AM-355	Plate	AMS 5549	2.6.2
AM-355	Bar, Forging and Forging Stock	AMS 5743	2.6.2
AZ31B	Sheet and Plate	AMS 4375	4.2.1
AZ31B	Plate	AMS 4376	4.2.1
AZ31B	Sheet and Plate	AMS 4377	4.2.1
AZ31B	Forging	ASTM B 91	4.2.1
AZ31B	Extrusion	ASTM B 107	4.2.1
AZ61A	Extrusion	AMS 4350	4.2.2
AZ61A	Forging	ASTM B 91	4.2.2
AZ91C/AZ91E	Sand Casting	AMS 4437	4.3.2
AZ91C/AZ91E	Sand Casting	AMS 4446	4.3.2
AZ91C/AZ91E	Investment Casting	AMS 4452	4.3.2
AZ92A	Sand Casting	AMS 4434	4.3.3
AZ92A	Permanent Mold Casting	AMS 4484	4.3.3
AZ92A	Investment Casting	AMS 4453	4.3.3
C355.0	Casting	AMS-A-21180	3.9.3
Copper Beryllium	Strip (TB00)	AMS 4530	7.3.2
Copper Beryllium	Strip (TD02)	AMS 4532	7.3.2
Copper Beryllium	Bar and Rod (TF00)	AMS 4533	7.3.2
Copper Beryllium	Bar and Rod (TH04)	AMS 4534	7.3.2
Copper Beryllium	Mechanical tubing (TF00)	AMS 4535	7.3.2
Copper Beryllium	Bar, Rod, Shapes and Forging (TB00)	AMS 4650	7.3.2
Copper Beryllium	Bar and Rod (TD04)	AMS 4651	7.3.2
Copper Beryllium	Sheet (TB00, TD01, TD02, TD04)	ASTM B 194	7.3.2
CP Titanium	Sheet, Strip and Plate	AMS 4900	5.2.1
CP Titanium	Sheet, Strip and Plate	AMS 4901	5.2.1
CP Titanium	Sheet, Strip and Plate	AMS 4902	5.2.1
CP Titanium	Bar	AMS 4921	5.2.1
CP Titanium	Extruded Bars and Shapes	AMS-T-81556	5.2.1
CP Titanium	Sheet, Strip and Plate	AMS-T-9046	5.2.1
CP Titanium	Bar	MIL-T-9047	5.2.1
Custom 450	Bar, Forging, Tubing, Wire and Ring (air melted)	AMS 5763	2.6.3
Custom 450	Bar, Forging, Tubing, Wire and Ring (CEM)	AMS 5773	2.6.3
Custom 455	Tubing (welded)	AMS 5578	2.6.4
Custom 455	Bar and Forging	AMS 5617	2.6.4
Custom 465	Bars, Wires, and Forgings	AMS 5936	2.6.5
D357.0	Sand Composite Casting	AMS 4241	3.9.7
D6AC	Bar and Forging	AMS 6431	2.3.1
D6AC	Tubing	AMS 6431	2.3.1
D6AC	Bar and Forging	AMS 6439	2.3.1
D6AC	Sheet, Strip and Plate	AMS 6439	2.3.1
EZ33A	Sand Casting	AMS 4442	4.3.4
Hastelloy X	Sheet and Plate	AMS 5536	6.3.1
Hastelloy X	Bar and Forging	AMS 5754	6.3.1
Haynes®230®	Plate, Sheet, and Strip	AMS 5878	6.3.9
Haynes®230®	Bar and Forging	AMS 5891	6.3.9
Haynes HR 120	Sheet, Strip and Plate	AMS 5916	6.3.10
HS 188	Sheet and Plate	AMS 5608	6.4.2
HS 188	Bar and Forging	AMS 5772	6.4.2
Hy-Tuf	Bar and Forging	AMS 6425	2.3.1
Hy-Tuf	Tubing	AMS 6425	2.3.1
Inconel 718	Investment Casting	AMS 5383	6.3.5
Inconel 718	Tubing; Creep Rupture	AMS 5589	6.3.5
Inconel 718	Tubing; Short-Time	AMS 5590	6.3.5
Inconel 718	Sheet, Strip and Plate; Creep Rupture	AMS 5596	6.3.5
Inconel 718	Sheet, Strip and Plate; Short-Time	AMS 5597	6.3.5
Inconel 718	Bar and Forging; Creep Rupture	AMS 5662	6.3.5
Inconel 718	Bar and Forging; Creep Rupture	AMS 5663	6.3.5
Inconel 718	Bar and Forging; Short-Time	AMS 5664	6.3.5
Inconel Alloy 600	Plate, Sheet and Strip	AMS 5540	6.3.2
Inconel Alloy 600	Tubing, Seamless	AMS 5580	6.3.2
Inconel Alloy 600	Bar and Rod	ASTM B 166	6.3.2
Inconel Alloy 600	Forging	ASTM B 564	6.3.2
Inconel Alloy 625	Sheet, Strip and Plate	AMS 5599	6.3.3
Inconel Alloy 625	Bar, Forging and Ring	AMS 5666	6.3.3
Inconel Alloy 706	Sheet, Strip and Plate	AMS 5605	6.3.4
Inconel Alloy 706	Sheet, Strip and Plate	AMS 5606	6.3.4
Inconel Alloy 706	Bar, Forging and Ring	AMS 5701	6.3.4
Inconel Alloy 706	Bar, Forging and Ring	AMS 5702	6.3.4
Inconel Alloy 706	Bar, Forging and Ring	AMS 5703	6.3.4
Inconel Alloy X-750	Sheet, Strip and Plate; Annealed	AMS 5542	6.3.6
Inconel Alloy X-750	Bar and Forging; Equalized	AMS 5667	6.3.6
L-605	Sheet	AMS 5537	6.4.1
L-605	Bar and Forging	AMS 5759	6.4.1
Manganese Bronzes	Casting	AMS 4860	7.3.1
Manganese Bronzes	Casting	AMS 4862	7.3.1
MP159 Alloy	Bar (solution treated and cold drawn)	AMS 5842	7.4.2
MP159 Alloy	Bar (solution treated, cold drawn and aged)	AMS 5843	7.4.2
MP35N Alloy	Bar (solution treated and cold drawn)	AMS 5844	7.4.1
MP35N Alloy	Bar (solution treated, cold drawn and aged)	AMS 5845	7.4.1
N-155	Sheet	AMS 5532	6.2.2
N-155	Tubing (welded)	AMS 5585	6.2.2
N-155	Bar and Forging	AMS 5768	6.2.2
N-155	Bar and Forging	AMS 5769	6.2.2
PH13-8Mo	Bar, Forging Ring and Extrusion (VIM+CEVM)	AMS 5629	2.6.5
PH15-7Mo	Plate, Sheet and Strip	AMS 5520	2.6.7
QE22A Magnesium	Sand Casting	AMS 4418	4.3.5
René 41	Plate, Sheet and Strip	AMS 5545	6.3.7
René 41	Bar and Forging	AMS 5713	6.3.7
René 41 - STA	Bar and Forging	AMS 5712	6.3.7
Standard Grade Beryllium	Sheet and Plate	AMS 7902	7.2.1
Standard Grade Beryllium	Bar, Rod, Tubing and Machined Shapes	AMS 7906	7.2.1
Ti-10V-2Fe-3Al (Ti-10-2-3)	Forging	AMS 4983	5.5.3
Ti-10V-2Fe-3Al (Ti-10-2-3)	Forging	AMS 4984	5.5.3
Ti-10V-2Fe-3Al (Ti-10-2-3)	Forging	AMS 4986	5.5.3
Ti-13V-11Cr-3Al	Sheet, Strip and Plate	AMS-T-9046	5.5.1
Ti-13V-11Cr-3Al	Bar	MIL-T-9047	5.5.1
Ti-15V-3Cr-3Sn-3Al (Ti-15-3-3-3)	Sheet and Strip	AMS 4914	5.5.2
Ti-4.5Al-3V-2Fe-2Mo	Sheet	AMS 4899	5.4.3
Ti-4.5Al-3V-2Fe-2Mo	Bars, Wires, forgings and Rings	AMS 4964	5.4.3
Ti-5Al-2.5Sn	Sheet, Strip and Plate	AMS 4910	5.3.1
Ti-5Al-2.5Sn	Bar	AMS 4926	5.3.1
Ti-5Al-2.5Sn	Forging	AMS 4966	5.3.1
Ti-5Al-2.5Sn	Extruded Bar and Shapes	AMS-T-81556	5.3.1
Ti-5Al-2.5Sn	Sheet, Strip and Plate	AMS-T-9046	5.3.1
Ti-5Al-2.5Sn	Bar	MIL-T-9047	5.3.1
Ti-6Al-2Sn-4Zr-2Mo	Sheet, Strip and Plate	AMS 4919	5.3.3
Ti-6Al-2Sn-4Zr-2Mo	Bar	AMS 4975	5.3.3
Ti-6Al-2Sn-4Zr-2Mo	Forging	AMS 4976	5.3.3
Ti-6Al-2Sn-4Zr-2Mo	Sheet and Strip	AMS-T-9046	5.3.3
Ti-6Al-4V	Sheet, Strip and Plate	AMS 4911	5.4.1
Ti-6Al-4V	Die Forging	AMS 4920	5.4.1
Ti-6Al-4V	Bar and Die Forging	AMS 4928	5.4.1
Ti-6Al-4V	Extrusion	AMS 4934	5.4.1
Ti-6Al-4V	Extrusion	AMS 4935	5.4.1
Ti-6Al-4V	Casting	AMS 4962	5.4.1
Ti-6Al-4V	Bar	AMS 4967	5.4.1
Ti-6Al-4V	Sheet, Strip and Plate	AMS-T-9046	5.4.1
Ti-6Al-4V	Bar	AMS 4965	5.4.1
Ti-6Al-4V	Bar	MIL-T-9047	5.4.1
Ti6Al-6V-2Sn	Sheet, Strip and Plate	AMS 4918	5.4.2
Ti6Al-6V-2Sn	Bar and Forging	AMS 4971	5.4.2
Ti6Al-6V-2Sn	Bar and Forging	AMS 4978	5.4.2
Ti6Al-6V-2Sn	Bar and Forging	AMS 4979	5.4.2
Ti6Al-6V-2Sn	Extruded Bar and Shapes	AMS-T-81556	5.4.2
Ti6Al-6V-2Sn	Sheet, Strip and Plate	AMS-T-9046	5.4.2
Ti-8Al-1Mo-1V	Sheet, Strip and Plate	AMS 4915	5.3.2
Ti-8Al-1Mo-1V	Sheet, Strip and Plate	AMS 4916	5.3.2
Ti-8Al-1Mo-1V	Forging	AMS 4973	5.3.2
Ti-8Al-1Mo-1V	Sheet, Strip and Plate	AMS-T-9046	5.3.2
Ti-8Al-1Mo-1V	Bar	MIL-T-9047	5.3.2
Waspaloy	Plate, Sheet and Strip	AMS 5544	6.3.8
Waspaloy	Forging	AMS 5704	6.3.8
Waspaloy	Bar, Forgings and Ring	AMS 5706	6.3.8
Waspaloy	Bar, Forgings and Ring	AMS 5707	6.3.8
Waspaloy	Bar, Forgings and Ring	AMS 5708	6.3.8
Waspaloy	Bar, Forgings and Ring	AMS 5709	6.3.8
ZE41A Magnesium	Sand Casting	AMS 4439	4.3.6
ZK60A-F	Extrusion	ASTM B 107	4.2.3
ZK60A-T5	Extrusion	AMS 4352	4.2.3
ZK60A-T5	Die and Hand Forging	AMS 4362	4.2.3
Key: Underline indicates inactive for new design.

C.0Specification Index

Appendix C lists the same entries sorted by material specification, with the alloy, the product form or application and the handbook section that covers it. Click a section number to open that section. Press Ctrl+F to find a specification.

Open this page of MIL-HDBK-5

Appendix C.0. Specification Index
Specification	Alloy Name	Form/Application	Section
AMS 4015	5052	Sheet and Plate	3.5.1
AMS 4016	5052	Sheet and Plate	3.5.1
AMS 4017	5052	Sheet and Plate	3.5.1
AMS 4025	6061	Sheet and Plate	3.6.2
AMS 4026	6061	Sheet and Plate	3.6.2
AMS 4027	6061	Sheet and Plate	3.6.2
AMS 4028	2014	Bare Sheet and Plate	3.2.1
AMS 4029	2014	Bare Sheet and Plate	3.2.1
AMS 4031	2219	Sheet and Plate	3.2.8
AMS 4035	2024	Bare Sheet and Plate	3.2.3
AMS 4037	2024	Bare Sheet and Plate	3.2.3
AMS 4044	7075	Bare Sheet and Plate	3.7.6
AMS 4045	7075	Bare Sheet and Plate	3.7.6
AMS 4049	7075	Clad Sheet and Plate	3.7.6
AMS 4050	7050	Bare Plate	3.7.4
AMS 4056	5083	Bare Sheet and Plate	3.5.2
AMS 4078	7075	Bare Plate	3.7.6
AMS 4080	6061	Tubing Seamless, Drawn	3.6.2
AMS 4082	6061	Tubing Seamless, Drawn	3.6.2
AMS 4084 (T61)	7475	Bare Sheet	3.7.10
AMS 4085 (T761)	7475	Bare Sheet	3.7.10
AMS 4086	2024	Tubing, Hydraulic, Seamless, Drawn	3.2.3
AMS 4089 (T7651)	7475	Bare Plate	3.7.10
AMS 4090 (T651)	7475	Bare Plate	3.7.10
AMS 4100 (T761)	7475	Clad Sheet	3.7.10
AMS 4101	2124	Plate	3.2.7
AMS 4107	7050	Die Forging	3.7.4
AMS 4108	7050	Hand Forging	3.7.4
AMS 4111	7049	Forging	3.7.3
AMS 4115	6061	Bar and Rod, Rolled or Cold Finished	3.6.2
AMS 4116	6061	Bar and Rod, Cold Finished	3.6.2
AMS 4117	6061	Bar and Rod, Rolled or Cold Finished	3.6.2
AMS 4118	2017	Bar and Rod, Rolled or Cold-Finished	3.2.2
AMS 4120	2024	Bar and Rod, Rolled or Cold-Finished	3.2.3
AMS 4121	2014	Bar and Rod, Rolled or Cold Finished	3.2.1
AMS 4122	7075	Bar and Rod, Rolled or Cold Finished	3.7.6
AMS 4123	7075	Bar and Rod, Rolled or Cold Finished	3.7.6
AMS 4124	7075	Bar and Rod, Rolled or Cold Finished	3.7.6
AMS 4125	6151	Die Forging	3.6.3
AMS 4126	7075	Forging	3.7.6
AMS 4127	6061	Forging	3.6.2
AMS 4130	2025	Die Forging	3.2.4
AMS 4132	2618	Die and Hand Forgings	3.2.13
AMS 4133	2014	Forging	3.2.1
AMS 4141	7075	Die Forging	3.7.6
AMS 4144	2219	Hand Forging	3.2.8
AMS 4147	7075	Forging	3.7.6
AMS 4148 (T66)	7175	Die Forging	3.7.8
AMS 4149 (T74)	7175	Die and Hand Forging	3.7.8
AMS 4150	6061	Extruded Rod, Bars, and Shapes	3.6.2
AMS 4152	2024	Extrusion	3.2.3
AMS 4153	2014	Extrusion	3.2.1
AMS 4157	7049	Extrusion	3.7.3
AMS 4160	6061	Extrusion	3.6.2
AMS 4161	6061	Extrusion	3.6.2
AMS 4162	2219	Extrusion	3.2.8
AMS 4163	2219	Extrusion	3.2.8
AMS 4164	2024	Extrusion	3.2.3
AMS 4165	2024	Extrusion	3.2.3
AMS 4172	6061	Extrusion	3.6.2
AMS 4173	6061	Extruded Rod, Bars, and Shapes	3.6.2
AMS 4179 (T7452)	7175	Hand Forging	3.7.8
AMS 4186	7075	Bar and Rod, Rolled or Cold Finished	3.7.6
AMS 4187	7075	Bar and Rod, Rolled or Cold Finished	3.7.6
AMS 4200	7049	Plate	3.7.3
AMS 4201	7050	Bare Plate	3.7.4
AMS 4202 (T7351)	7475	Bare Plate	3.7.10
AMS 4204	7010	Plate	3.7.1
AMS 4205	7010	Plate	3.7.1
AMS 4206	7055	Plate	3.7.5
AMS 4207 (T61)	7475	Clad Sheet	3.7.10
AMS 4211	7040	Plate	3.7.2
AMS 4216	6013 (T4)	Sheet	3.6.1
AMS 4217	356.0	Sand Casting	3.9.4
AMS 4218	A356.0	Casting	3.9.5
AMS 4241	D357.0	Sand Composite Casting	3.9.7
AMS 4248	6061	Hand Forging	3.6.2
AMS 4251	2090	Sheet	3.2.6
AMS 4252 (T7751)	7150	Bare Plate	3.7.7
AMS 4254	2024-T3 ARAMID Fiber Reinforced	Sheet Laminate	7.5.1
AMS 4260	356.0	Investment Casting	3.9.4
AMS 4270	2424 (Clad)	Sheet	3.2.10
AMS 4273	2424 (Bare)	Sheet	3.2.10
AMS 4281	355.0	Permanent Mold Casting	3.9.2
AMS 4284	356.0	Permanent Mold Casting	3.9.4
AMS 4296	2524-T3	Sheet and Plate	3.2.12
AMS 4302	7475-T761 ARAMID Fiber Reinforced	Sheet Laminate	7.5.2
AMS 4306 (T6151)	7150	Bare Plate	3.7.7
AMS 4307 (T61511)	7150	Extrusion	3.7.7
AMS 4320	7149	Forging	3.7.3
AMS 4324	7055	Extrusion	3.7.5
AMS 4330	2297	Plate	3.2.9
AMS 4333	7050	Die Forging	3.7.4
AMS 4334	7249	Hand Forging	3.7.9
AMS 4336	7055	Extrusion	3.7.5
AMS 4337	7055	Extrusion	3.7.5
AMS 4338	2026	Bars, Rods, and Profiles	3.2.5
AMS 4340	7050	Extruded Shape	3.7.4
AMS 4341	7050	Extruded Shape	3.7.4
AMS 4342	7050	Extruded Shape	3.7.4
AMS 4343	7149	Extrusion	3.7.3
AMS 4344 (T73511)	7175	Extrusion	3.7.8
AMS 4345 (T77511)	7150	Extrusion	3.7.7
AMS 4347	6013 (T6)	Sheet	3.6.1
AMS 4350	AZ61A	Extrusion	4.2.2
AMS 4352	ZK60A-T5	Extrusion	4.2.3
AMS 4362	ZK60A-T5	Die and Hand Forging	4.2.3
AMS 4375	AZ31B	Sheet and Plate	4.2.1
AMS 4376	AZ31B	Plate	4.2.1
AMS 4377	AZ31B	Sheet and Plate	4.2.1
AMS 4418	QE22A Magnesium	Sand Casting	4.3.5
AMS 4434	AZ92A	Sand Casting	4.3.3
AMS 4437	AZ91C/AZ91E	Sand Casting	4.3.2
AMS 4439	ZE41A Magnesium	Sand Casting	4.3.6
AMS 4442	EZ33A	Sand Casting	4.3.4
AMS 4446	AZ91C/AZ91E	Sand Casting	4.3.2
AMS 4452	AZ91C/AZ91E	Investment Casting	4.3.2
AMS 4453	AZ92A	Investment Casting	4.3.3
AMS 4455	AM100A	Investment Casting	4.3.1
AMS 4483	AM100A	Permanent Mold Casting	4.3.1
AMS 4484	AZ92A	Permanent Mold Casting	4.3.3
AMS 4530	Copper Beryllium	Strip (TB00)	7.3.2
AMS 4532	Copper Beryllium	Strip (TD02)	7.3.2
AMS 4533	Copper Beryllium	Bar and Rod (TF00)	7.3.2
AMS 4534	Copper Beryllium	Bar and Rod (TH04)	7.3.2
AMS 4535	Copper Beryllium	Mechanical tubing (TF00)	7.3.2
AMS 4650	Copper Beryllium	Bar, Rod, Shapes and Forging (TB00)	7.3.2
AMS 4651	Copper Beryllium	Bar and Rod (TD04)	7.3.2
AMS 4860	Manganese Bronzes	Casting	7.3.1
AMS 4862	Manganese Bronzes	Casting	7.3.1
AMS 4899	Ti-4.5Al-3V-2Fe-2Mo	Sheet	5.4.3
AMS 4900	CP Titanium	Sheet, Strip and Plate	5.2.1
AMS 4901	CP Titanium	Sheet, Strip and Plate	5.2.1
AMS 4902	CP Titanium	Sheet, Strip and Plate	5.2.1
AMS 4910	Ti-5Al-2.5Sn	Sheet, Strip and Plate	5.3.1
AMS 4911	Ti-6Al-4V	Sheet, Strip and Plate	5.4.1
AMS 4914	Ti-15V-3Cr-3Sn-3Al (Ti-15-3)-3-3	Sheet and Strip	5.5.2
AMS 4915	Ti-8Al-1Mo-1V	Sheet, Strip and Plate	5.3.2
AMS 4916	Ti-8Al-1Mo-1V	Sheet, Strip and Plate	5.3.2
AMS 4918	Ti6Al-6V-2Sn	Sheet, Strip and Plate	5.4.2
AMS 4919	Ti-6Al-2Sn-4Zr-2Mo	Sheet, Strip and Plate	5.3.3
AMS 4920	Ti-6Al-4V	Die Forging	5.4.1
AMS 4921	CP Titanium	Bar	5.2.1
AMS 4926	Ti-5Al-2.5Sn	Bar	5.3.1
AMS 4928	Ti-6Al-4V	Bar and Die Forging	5.4.1
AMS 4934	Ti-6Al-4V	Extrusion	5.4.1
AMS 4935	Ti-6Al-4V	Extrusion	5.4.1
AMS 4962	Ti-6Al-4V	Casting	5.4.1
AMS 4964	Ti-4.5Al-3V-2Fe-2Mo	Bars, Wires, Forgings and Rings	5.4.3
AMS 4965	Tii-6Al-4V	Bar	5.4.1
AMS 4966	Ti-5Al-2.5Sn	Forging	5.3.1
AMS 4967	Ti-6Al-4V	Bar	5.4.1
AMS 4971	Ti6Al-6V-2Sn	Bar and Forging	5.4.2
AMS 4973	Ti-8Al-1Mo-1V	Forging	5.3.2
AMS 4975	Ti-6Al-2Sn-4Zr-2Mo	Bar	5.3.3
AMS 4976	Ti-6Al-2Sn-4Zr-2Mo	Forging	5.3.3
AMS 4978	Ti6Al-6V-2Sn	Bar and Forging	5.4.2
AMS 4979	Ti6Al-6V-2Sn	Bar and Forging	5.4.2
AMS 4983	Ti-10V-2Fe-3Al (Ti-10-2-3)	Forging	5.5.3
AMS 4984	Ti-10V-2Fe-3Al (Ti-10-2-3)	Forging	5.5.3
AMS 4986	Ti-10V-2Fe-3Al (Ti-10-2-3)	Forging	5.5.3
AMS 5046	AISI 1025	Sheet, Strip, and Plate	2.2.1
AMS 5075	AISI 1025 - N	Seamless Tubing	2.2.1
AMS 5077	AISI 1025 - N	Tubing	2.2.1
AMS 5342	17-4PH	Investment Casting (H1100)	2.6.9
AMS 5343	17-4PH	Investment Casting (H1000)	2.6.9
AMS 5344	17-4PH	Investment Casting (H900)	2.6.9
AMS 5383	Inconel 718	Investment Casting	6.3.5
AMS 5400	15-5PH	Investment Casting	2.6.7
AMS 5513	AISI 301	Sheet, Strip and Plate	2.7.1
AMS 5516	AISI 302	Sheet, Strip and Plate	2.7.1
AMS 5517	AISI 301	Sheet and Strip (125 ksi)	2.7.1
AMS 5518	AISI 301	Sheet and Strip (150 ksi)	2.7.1
AMS 5519	AISI 301	Sheet and Strip (185 ksi)	2.7.1
AMS 5520	PH15-7Mo	Plate, Sheet and Strip	2.6.8
AMS 5524	AISI 316	Sheet, Strip and Plate	2.7.1
AMS 5525	A-286	Sheet, Strip and Plate	6.2.1
AMS 5528	17-7PH	Plate, Sheet and Strip	2.6.10
AMS 5532	N-155	Sheet	6.2.2
AMS 5536	Hastelloy X	Sheet and Plate	6.3.1
AMS 5537	L-605	Sheet	6.4.1
AMS 5540	Inconel Alloy 600	Plate, Sheet and Strip	6.3.2
AMS 5542	Inconel Alloy X-750	Sheet, Strip and Plate; Annealed	6.3.6
AMS 5544	Waspaloy	Plate, Sheet and Strip	6.3.8
AMS 5545	René 41	Plate, Sheet and Strip	6.3.7
AMS 5547	AM-355	Sheet and Strip	2.6.2
AMS 5548	AM-350	Sheet and Strip	2.6.1
AMS 5549	AM-355	Plate	2.6.2
AMS 5578	Custom 455	Tubing (welded)	2.6.4
AMS 5580	Inconel Alloy 600	Tubing, Seamless	6.3.2
AMS 5585	N-155	Tubing (welded)	6.2.2
AMS 5589	Inconel 718	Tubing; Creep Rupture	6.3.5
AMS 5590	Inconel 718	Tubing; Short-Time	6.3.5
AMS 5596	Inconel 718	Sheet, Strip and Plate; Creep Rupture	6.3.5
AMS 5597	Inconel 718	Sheet, Strip and Plate; Short-Time	6.3.5
AMS 5599	Inconel Alloy 625	Sheet, Strip and Plate	6.3.3
AMS 5604	17-4PH	Sheet, Strip and Plate	2.6.9
AMS 5605	Inconel Alloy 706	Sheet, Strip and Plate	6.3.4
AMS 5606	Inconel Alloy 706	Sheet, Strip and Plate	6.3.4
AMS 5608	HS 188	Sheet and Plate	6.4.2
AMS 5617	Custom 455	Bar and Forging	2.6.4
AMS 5629	PH13-8Mo	Bar, Forging Ring and Extrusion (VIM+CEVM)	2.6.6
AMS 5643	17-4PH	Bar, Forging and Ring	2.6.9
AMS 5659	15-5PH	Bar, Forging, Ring and Extrusion (CEVM)	2.6.7
AMS 5662	Inconel 718	Bar and Forging; Creep Rupture	6.3.5
AMS 5663	Inconel 718	Bar and Forging; Creep Rupture	6.3.5
AMS 5664	Inconel 718	Bar and Forging; Short-Time	6.3.5
AMS 5666	Inconel Alloy 625	Bar, Forging and Ring	6.3.3
AMS 5667	Inconel Alloy X-750	Bar and Forging; Equalized	6.3.6
AMS 5701	Inconel Alloy 706	Bar, Forging and Ring	6.3.4
AMS 5702	Inconel Alloy 706	Bar, Forging and Ring	6.3.4
AMS 5703	Inconel Alloy 706	Bar, Forging and Ring	6.3.4
AMS 5704	Waspaloy	Forging	6.3.8
AMS 5706	Waspaloy	Bar, Forgings and Ring	6.3.8
AMS 5707	Waspaloy	Bar, Forgings and Ring	6.3.8
AMS 5708	Waspaloy	Bar, Forgings and Ring	6.3.8
AMS 5709	Waspaloy	Bar, Forgings and Ring	6.3.8
AMS 5712	René 41 - STA	Bar and Forging	6.3.7
AMS 5713	René 41	Bar and Forging	6.3.7
AMS 5731	A-286	Bar, Forging, Tubing and Ring	6.2.1
AMS 5732	A-286	Bar, Forging, Tubing and Ring	6.2.1
AMS 5734	A-286	Bar, Forging and Tubing	6.2.1
AMS 5737	A-286	Bar, Forging and Tubing	6.2.1
AMS 5743	AM-355	Bar, Forging and Forging Stock	2.6.2
AMS 5754	Hastelloy X	Bar and Forging	6.3.1
AMS 5759	L-605	Bar and Forging	6.4.1
AMS 5763	Custom 450	Bar, Forging, Tubing, Wire and Ring (air melted)	2.6.3
AMS 5768	N-155	Bar and Forging	6.2.2
AMS 5769	N-155	Bar and Forging	6.2.2
AMS 5772	HS 188	Bar and Forging	6.4.2
AMS 5773	Custom 450	Bar, Forging, Tubing, Wire and Ring (CEM)	2.6.3
AMS 5842	MP159 Alloy	Bar (solution treated and cold drawn)	7.4.2
AMS 5843	MP159 Alloy	Bar (solution treated, cold drawn and aged)	7.4.2
AMS 5844	MP35N Alloy	Bar (solution treated and cold drawn)	7.4.1
AMS 5845	MP35N Alloy	Bar (solution treated, cold drawn and aged)	7.4.1
AMS 5862	15-5PH	Sheet, Strip and Plate (CEVM)	2.6.7
AMS 5878	Haynes®230®	Plate, Sheet and Strip	6.3.9
AMS 5891	Haynes®230®	Bar and Forging	6.3.9
AMS 5901	AISI 301	Plate, Sheet and Strip	2.7.1
AMS 5902	AISI 301	Sheet and Strip (175 ksi)	2.7.1
AMS 5903	AISI 302	Sheet and Strip (125 ksi)	2.7.1
AMS 5904	AISI 302	Sheet and Strip (150 ksi)	2.7.1
AMS 5905	AISI 302	Sheet and Strip (175 ksi)	2.7.1
AMS 5906	AISI 302	Sheet and Strip (185 ksi)	2.7.1
AMS 5907	AISI 316	Sheet, Strip and Plate (125 ksi)	2.7.1
AMS 5910	AISI 304	Sheet, Strip and Plate (125 ksi)	2.7.1
AMS 5911	AISI 304	Sheet and Strip (150 ksi)	2.7.1
AMS 5912	AISI 304	Sheet and Strip (175 ksi)	2.7.1
AMS 5913	AISI 304	Sheet and Strip (185 ksi)	2.7.1
AMS 5916	Haynes HR-120	Sheet, Strip and Plate	6.3.10
AMS 5936	Cutsom 465	Bar, Wires and Forgings	2.6.5
AMS 6257	300M (0.42C)	Bar and Forging	2.3.1
AMS 6257	300M (0.42C)	Tubing	2.3.1
AMS 6280	8630	Bar and Forging	2.3.1
AMS 6281	8630	Tubing	2.3.1
AMS 6282	8735	Tubing	2.3.1
AMS 6320	8735	Bar and Forging	2.3.1
AMS 6322	8740	Bar and Forging	2.3.1
AMS 6323	8740	Tubing	2.3.1
AMS 6327	8740	Bar and Forging	2.3.1
AMS 6348	4130	Bar and Forging	2.3.1
AMS 6349	4140	Bar and Forging	2.3.1
AMS 6350	4130	Sheet, Strip and Plate	2.3.1
AMS 6350	8630	Sheet, Strip and Plate	2.3.1
AMS 6351	4130	Sheet, Strip and Plate	2.3.1
AMS 6352	4135	Sheet, Strip and Plate	2.3.1
AMS 6355	8630	Tubing	2.3.1
AMS 6357	8735	Sheet, Strip and Plate	2.3.1
AMS 6358	8740	Sheet, Strip and Plate	2.3.1
AMS 6359	4340	Sheet, Strip and Plate	2.3.1
AMS 6360	4130	Tubing (normalized)	2.3.1
AMS 6361	4130	Tubing	2.3.1
AMS 6362	4130	Tubing	2.3.1
AMS 6365	4135	Tubing	2.3.1
AMS 6370	4130	Bar and Forging	2.3.1
AMS 6371	4130	Tubing	2.3.1
AMS 6372	4135	Tubing	2.3.1
AMS 6373	4130	Tubing	2.3.1
AMS 6374	4130	Tubing	2.3.1
AMS 6381	4140	Tubing	2.3.1
AMS 6382	4140	Bar and Forging	2.3.1
AMS 6395	4140	Sheet, Strip and Plate	2.3.1
AMS 6411	4330V	Bar and Forging	2.3.1
AMS 6411	4330V	Tubing	2.3.1
AMS 6414	4340	Bar and Forging	2.3.1
AMS 6414	4340	Tubing	2.3.1
AMS 6415	4340	Bar and Forging	2.3.1
AMS 6415	4340	Tubing	2.3.1
AMS 6417	300M (0.4C)	Bar and Forging	2.3.1
AMS 6417	300M (0.4C)	Tubing	2.3.1
AMS 6419	300M (0.42C)	Bar and Forging	2.3.1
AMS 6419	300M (0.42C)	Tubing	2.3.1
AMS 6425	Hy-Tuf	Bar and Forging	2.3.1
AMS 6425	Hy-Tuf	Tubing	2.3.1
AMS 6427	4330V	Bar and Forging	2.3.1
AMS 6427	4330V	Tubing	2.3.1
AMS 6429	4335V	Bar and Forging	2.3.1
AMS 6429	4335V	Tubing	2.3.1
AMS 6430	4335V	Bar and Forging	2.3.1
AMS 6430	4335V	Tubing	2.3.1
AMS 6431	D6AC	Bar and Forging	2.3.1
AMS 6431	D6AC	Tubing	2.3.1
AMS 6433	4335V	Sheet, Strip and Plate	2.3.1
AMS 6435	4335V	Sheet, Strip and Plate	2.3.1
AMS 6437	5Cr-Mo-V	Sheet, Strip and Plate	2.4.1
AMS 6439	D6AC	Sheet, Strip and Plate	2.3.1
AMS 6439	D6AC	Bar and Forging	2.3.1
AMS 6454	4340	Sheet, Strip and Plate	2.3.1
AMS 6478	AerMet 100	Bar and Forging	2.5.3
AMS 6487	5Cr-Mo-V	Bar and Forging (CEVM)	2.4.1
AMS 6488	5Cr-Mo-V	Bar and Forging	2.4.1
AMS 6512	250	Bar	2.5.1
AMS 6514	280 (300)	Bar	2.5.1
AMS 6520	250	Sheet and Plate	2.5.1
AMS 6521	280 (300)	Sheet and Plate	2.5.1
AMS 6523	9Ni-4Co-0.20C	Sheet, Strip and Plate	2.4.2
AMS 6524	9Ni-4Co-0.20C	Sheet, Strip and Plate	2.4.3
AMS 6526	9Ni-4Co-0.20C	Bar and Forging, Tubing	2.4.3
AMS 6527	AF1410	Bar and Forging	2.5.2
AMS 6528	4130	Bar and Forging	2.3.1
AMS 6529	4140	Bar and Forging	2.3.1
AMS 6532	AerMet 100	Bar and Forging	2.5.3
AMS 7902	Standard Grade Beryllium	Sheet and Plate	7.2.1
AMS 7906	Standard Grade Beryllium	Bar, Rod, Tubing and Machined Shapes	7.2.1
AMS-A-21180	A201.0	Casting (T7 Temper)	3.8.1
AMS-A-21180	354.0	Casting	3.9.1
AMS-A-21180	C355.0	Casting	3.9.3
AMS-A-21180	A356.0	Casting	3.9.5
AMS-A-21180	A357.0	Casting	3.9.6
AMS-A-21180	359.0	Casting	3.9.8
AMS-A-22771	2014	Forging	3.2.1
AMS-A-22771	2618	Die Forging	3.2.13
AMS-A-22771	6061	Forging	3.6.2
AMS-A-22771	6151	Forging	3.6.3
AMS-A-22771	7049/7149	Forging	3.7.3
AMS-A-22771	7050	Forging	3.7.4
AMS-A-22771	7075	Forging	3.7.6
AMS-A-22771	7175	Forging	3.7.8
AMS-QQ-A-367	2014	Forging	3.2.1
AMS-QQ-A-367	2618	Forging	3.2.13
AMS-QQ-A-367	6061	Forging	3.6.2
AMS-QQ-A-367	7049/7149	Forging	3.7.3
AMS-QQ-A-367	7075	Forging	3.7.6
AMS-QQ-A-200/2	2014	Extruded Bar, Rod and Shapes	3.2.1
AMS-QQ-A-200/3	2024	Extruded Bar, Rod and Shapes	3.2.3
AMS-QQ-A-200/4	5083	Extruded Bar, Rod and Shapes	3.5.2
AMS-QQ-A-200/5	5086	Extruded Bar, Rod and Shapes	3.5.3
AMS-QQ-A-200/6	5454	Extruded Bar, Rod and Shapes	3.5.4
AMS-QQ-A-200/7	5456	Extruded Bar, Rod and Shapes	3.5.5
AMS-QQ-A-200/8	6061	Extruded Rod, Bar Shapes and Tubing	3.6.2
AMS-QQ-A-200/11, 15	7075	Extruded Bar, Rod and Shapes	3.7.6
AMS-QQ-A-225/4	2014	Rolled or Drawn Bar, Rod and Shapes	3.2.1
AMS-QQ-A-225/5	2017	Rolled Bar and Rod	3.2.2
AMS-QQ-A-225/6	2024	Rolled or Drawn Bar, Rod and Wire	3.2.3
AMS-QQ-A-225/8	6061	Rolled Bar, Rod and Shapes	3.6.2
AMS-QQ-A-225/9	7075	Rolled or Drawn Bar and Rod	3.7.6
AMS-QQ-A-250/3	2014	Clad Sheet and Plate	3.2.1
AMS-QQ-A-250/4	2024	Bare Sheet and Plate	3.2.3
AMS-QQ-A-250/5	2024	Clad Sheet and Plate	3.2.3
AMS-QQ-A-250/6	5083	Bare Sheet and Plate	3.5.2
AMS-QQ-A-250/7	5086	Sheet and Plate	3.5.3
AMS-QQ-A-250/8	5052	Sheet and Plate	3.5.1
AMS-QQ-A-250/9	5456	Sheet and Plate	3.5.5
AMS-QQ-A-250/10	5454	Sheet and Plate	3.5.4
AMS-QQ-A-250/11	6061	Sheet and Plate	3.6.2
AMS-QQ-A-250/12, 24	7075	Bare Sheet and Plate	3.7.6
AMS-QQ-A-250/13, 25	7075	Clad Sheet and Plate	3.7.6
AMS-QQ-A-250/29	2124	Plate	3.2.7
AMS-QQ-A-250/30	2219	Sheet and Plate	3.2.8
AMS-QQ-A-367	7049	Forging	3.7.3
AMS-S-5000	4340	Bar and Forging	2.3.1
AMS-S-5626	4140	Bar and Forging	2.3.1
AMS-S-6049	8740	Bar and Forging	2.3.1
AMS-S-6050	8630	Bar and Forging	2.3.1
AMS-S-6758	4130	Bar and Forging	2.3.1
AMS-S-7952	AISI 1025	Sheet and Strip	2.2.1
AMS-S-18728	8630	Sheet, Strip and Plate	2.3.1
AMS-S-18729	4130	Sheet, Strip and Plate	2.3.1
AMS-T-5066	AISI 1025 - N	Tubing	2.2.1
AMS-T-6735	4135	Tubing	2.3.1
AMS-T-6736	4130	Tubing	2.3.1
AMS-T-81556	CP Titanium	Extruded Bars and Shapes	5.2.1
AMS-T-81556	Ti-5Al-2.5Sn	Extruded Bar and Shapes	5.3.1
AMS-T-81556	Ti6Al-6V-2Sn	Extruded Bar and Shapes	5.4.2
AMS-T-9046	CP Titanium	Sheet, Strip and Plate	5.2.1
AMS-T-9046	Ti-5Al-2.5Sn	Sheet, Strip and Plate	5.3.1
AMS-T-9046	Ti-8Al-1Mo-1V	Sheet, Strip and Plate	5.3.2
AMS-T-9046	Ti-6Al-2Sn-4Zr-2Mo	Sheet and Strip	5.3.3
AMS-T-9046	Ti-6Al-4V	Sheet, Strip and Plate	5.4.1
AMS-T-9046	Ti6Al-6V-2Sn	Sheet, Strip and Plate	5.4.2
AMS-T-9046	Ti-13V-11Cr-3Al	Sheet, Strip and Plate	5.5.1
AMS-WW-T-700/3	2024	Tubing	3.2.3
AMS-WW-T-700/6	6061	Tubing Seamless, Drawn	3.6.2
ASTM A 108	AISI 1025	Bar	2.2.1
ASTM B 91	AZ31B	Forging	4.2.1
ASTM B 91	AZ61A	Forging	4.2.2
ASTM B 107	ZK60A-F	Extrusion	4.2.3
ASTM B 107	AZ31B	Extrusion	4.2.1
ASTM B 166	Inconel Alloy 600	Bar and Rod	6.3.2
ASTM B 194	Copper Beryllium	Sheet (TB00, TD01, TD02, TD04)	7.3.2
ASTM B 564	Inconel Alloy 600	Forging	6.3.2
MIL-DTL-46192	2519	Plate	3.2.11
MIL-T-9047	CP Titanium	Bar	5.2.1
MIL-T-9047	Ti-5Al-2.5Sn	Bar	5.3.1
MIL-T-9047	Ti-8Al-1Mo-1V	Bar	5.3.2
MIL-T-9047	Ti-6Al-4V	Bar	5.4.1
MIL-T-9047	Ti-13V-11Cr-3Al	Bar	5.5.1
Key: Underline indicates inactive for new design.

Chapter 1 (General) Chapter 2 (Steel) Chapter 3 (Aluminum) Chapter 4 (Magnesium) Chapter 5 (Titanium) Chapter 6 (Heat-Resistant Alloys) Chapter 7 (Miscellaneous Alloys) Chapter 8 (Structural Joints)

MIL-HDBK-5: Appendix B & C
Alloy and Specification Index

Cite This Work

MIL-HDBK-5: Appendix B & CAlloy and Specification Index

Cite This Work

MIL-HDBK-5: Appendix B & C
Alloy and Specification Index