Material Spec Navigator: Every ASTM, ASME, AMS, Federal QQ and MIL Specification for Steel, Stainless, Aluminum, Titanium, Nickel, Copper and Other Metals by Alloy, Product Form and Temper

Which Spec Covers My Material?

Pick an alloy, then a product form (sheet, cold-finished bar, extrusion, forging, casting) and, if you like, a temper. The table lists every specification that covers it: industrial ASTM and ASME specs, aerospace AMS specs, and the old federal QQ and military MIL specs that still turn up on drawings.

Each spec is labelled current, inactive for new design, obsolete but still common or obsolete, with what replaced it and a line on when you would pick it. It covers carbon, alloy and tool steel, stainless steel, cast iron, aluminum, titanium, nickel and cobalt alloys, copper alloys, magnesium, zinc and refractory metals. Federal and military specs come from a full sweep of the ASSIST database, so cancelled specs back to the 1950s are listed too.

304 sheet Cold-drawn 304 bar 6061 plate 6061-T6511 17-4PH 4140 bar 4130 tube Ti-6Al-4V bar Inconel 718 360 brass What replaced QQ-A-250?

Sheet, Plate, Bar, Rod, Tube or Extrusion?

Specs are written per product form, so pick the form first. The same alloy can be four different specs as sheet, plate, bar and extrusion.

Sheet and plate

Flat, wide and rolled. Thickness decides the name. Aluminum is sheet from 0.006 to 0.249 in (0.15–6.3 mm) and plate from 0.250 in (6.3 mm) up; thinner is foil. Stainless becomes plate at 3/16 in (4.76 mm); carbon steel sheet generally stops near 0.180 in (4.6 mm).

Strip and coil

Thin flat product in narrow widths, usually shipped rolled up. In stainless, strip is under 3/16 in (4.76 mm) thick and under 24 in (610 mm) wide. Most sheet also leaves the mill as coil before it is cut to length.

Bar

Solid and long, with a square, rectangular (flat), hex or round section. Cold-finished bar is drawn or ground to close size. Aluminum flat bar is often extruded (B221) or sawn from plate (B209) rather than rolled (B211), and is certified to that spec. Stainless flat bar is often cut from plate or strip and keeps its A240 cert; round, square and hex bar is A276 or A479. Stainless flats wider than 10 in (254 mm) count as plate.

Rod and wire

Round solid product. In aluminum and copper, rod is round bar of 3/8 in (9.5 mm) and over, and wire is smaller. In carbon steel, rod usually means hot-rolled wire rod in coils, the feedstock for wire.

Extrusion

Hot metal pushed through a shaped die, so the section can be almost anything: T-slot, channel, angle, hollow tube or plain bar. Mostly aluminum. Extruded tempers end in 10 or 11 (T6510, T6511) when the extrusion is stretched to relieve stress.

Tube and pipe

Hollow product. Tube is ordered by outside diameter and wall thickness; pipe by nominal size and schedule. Seamless tube is pierced or extruded, welded tube is formed from strip, and drawn tube is cold drawn to close size.

Forgings (hammered or pressed to shape) and castings (poured into a mold) have their own specs too. Size limits are from ANSI H35.2 for aluminum and ASTM A480 and A484 for stainless. Check the spec for the exact limits of your alloy and product.

MATERIAL SPEC NAVIGATOR
alloy · form · temper → every spec
Filter
Specifications in the Navigator
Aluminum, wrought: 497 specs
SpecTitleAlloysStatusReplaced by
A-A-1008Aluminum FoilCancelled 1990QQ-A-1876
A-A-1676Aluminum Foil (food Handling and Processing)Cancelled 1999
AMS 4001Aluminum Sheet and Plate (1100-O)1100Cancelled 2007ASTM B209
AMS 4002Aluminum Alloy Tubing Seamless Drawn 1.8Cu - 1.0Mg - 0.8Si - 0.20Cr Solution Heat Treated Stress-Relieved by Stretching and Aged (2013-T6511)2013Likely current
AMS 4003Aluminum Alloy, Sheet and Plate 0.12 Cu (1100-H14) Strain Hardened1100Cancelled 2009
AMS 4004Aluminum Alloy, Foil 2.5Mg - 0.25Cr (5052-H191) Strain Hardened5052Likely current
AMS 4006Aluminum Alloy, Sheet and Plate, 1.25Mn - 0.12Cu (3003-O), Annealed3003Cancelled 2007ASTM B209
AMS 4008Aluminum Alloy Sheet and Plate (3003-H14)3003Cancelled 2006ASTM B209
AMS 4009Aluminum Alloy Foil 1.0MG - 0.6SI - 0.30CU - 0.20CR (6061-0) Annealed6061Current
AMS 4010Aluminum Alloy Foil 1.2MN - 0.12CU (3003-H18)3003Cancelled 2010
AMS 4011Aluminum, Foil and Light Gage Sheet 99.45Al (1145-0) Annealed (Stabilized: Aug 2022)1145, 2022Stabilized 2022
AMS 4015Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-O) Annealed5052Likely current
AMS 4016Aluminum Alloy Sheet and Plate 2.5Mg - 0.25Cr (5052-H32) Strain Hardened Quarter-Hard and Stabilized5052Likely current
AMS 4017Aluminum Alloy Sheet and Plate 2.5Mg - 0.25Cr (5052-H34) Strain-Hardened Half-Hard and Stabilized5052Likely current
AMS 4018Aluminum Alloy, Sheet and Plate 3.5Mg - 0.25Cr (554-01)Cancelled 2000
AMS 4021Aluminum Alloy, Alclad Sheet and Plate 1.0MG - 0.60SI - 0.28CU - 0.20CR (Alclad 6061-0) Annealed6061Current
AMS 4022Aluminum Alloy Sheet and Plate, Alclad 1.0MG - 0.60SI - 0.28CU - 0.20CR (Alclad 6061; -T4 Sheet, -T451 Plate)6061Cancelled 2016
AMS 4023Aluminum Alloy Sheet and Plate, Alclad 1.0MG - 0.60SI - 0.28CU - 0.20CR (Alclad 6061; -T6 Sheet, -T651 Plate)6061Current
AMS 4025Aluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed6061Likely current
AMS 4026Aluminum Alloy Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T4 Sheet, -T451 Plate) Solution Heat Treated and Naturally Aged6061Current
AMS 4027Aluminum Alloy, Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated6061Current
AMS 4028Aluminum alloy sheet and plate, 2014 bare (T6)2014Inactive for new design
AMS 4029Aluminum Alloy Sheet and Plate (2014; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated2014Current
AMS 4031Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-O) Annealed or, When Specified, _As Fabricated_ (2219-F)2219Likely current
AMS 4035Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-0) Annealed; or when specified, â__As Fabricatedâ__ (2024-F)2024Likely current
AMS 4036Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn Alclad One Side 2024 and 1-1/2% Alclad2024Current
AMS 4037Aluminum Alloy Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Treated2024Current
AMS 4040Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024-O with 1 _آ% Alclad); Annealed2024Likely current
AMS 4041Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024, -T3 Sheet/-T351 Plate with 1-1/2% Alclad) Solution Heat Treated, Cold Worked and Naturally Aged2024Likely current
AMS 4044Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed (7075-O) or, When Specified, _As Fabricated_ (7075-F)7075Likely current
AMS 4045Aluminum Alloy Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated7075Current
AMS 4046Aluminum Alloy Sheet and Plate, Alclad One Side 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad One Side 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated7075Likely current
AMS 4048Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-O) Annealed or when specified, _As Fabricated_ (Alclad 7075-F)7075Likely current
AMS 4049Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated7075Current
AMS 4050Aluminum Alloy Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) Solution Heat Treated, Stress Relieved, and Overaged7050Current
AMS 4056Aluminum Alloy Sheet and Plate 4.4Mg - 0.70Mn - 0.15Cr (5083-0) Annealed5083Likely current
AMS 4067Aluminum Alloy Drawn Seamless Tubing (3003-H14)3003To confirm
AMS 4070Aluminum Alloy, Drawn, Round Seamless Tubing 2.5Mg - 0.25Cr (5052-O) Annealed5052Likely current
AMS 4071Aluminum Alloy Drawn, Round, Seamless Hydraulic Tubing 2.5mg - 0.25cr (5052-0) Annealed5052Current
AMS 4076ALUMINUM ALLOY TUBING (SEAMLESS) Magnesium Silicon Chromium (53S-W)To confirm
AMS 4077Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-O) Annealed2024Likely current
AMS 4078Aluminum Alloy Sheet and Plate 5.6Zn 2.5Mg-1.6Cu-0.23Cr 7075: (-T73 Sheet -T7351 Plate) Solution Heat Treated and Overaged7075Likely current
AMS 4080Aluminum Alloy, Drawn Seamless Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed6061Likely current
AMS 4081Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged6061Current
AMS 4082Aluminum Alloy, Seamless Drawn Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated6061Current
AMS 4083Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated6061Current
AMS 4084Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T61) Solution and Precipitation Heat Treated7475Current
AMS 4085Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged7475Current
AMS 4086Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated, Cold Worked, and Naturally Aged2024Likely current
AMS 4087Aluminum Alloy Tubing, Seamless, Drawn 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed - Composition similar to UNS A920242024Likely current
AMS 4088Aluminum Alloy Tubing, Seamless, Drawn (2024)2024Likely current
AMS 4089Aluminum Alloy Plate 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T7651) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated7475Current
AMS 4090Aluminum Alloy Plate 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T651) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated7475Current
AMS 4094Aluminum Alloy Sheet and Plate Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated Cold Worked and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated Stress Relieved and Precipitation2219Likely current
AMS 4095Aluminum Alloy Alclad Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T31; Sheet Solution Heat Treated and Cold Worked Alclad 2219-T351; Plate Solution Heat Treated and Stress Relieved2219Likely current
AMS 4096Aluminum Alloy Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (Alclad 2219-O) Annealed2219Likely current
AMS 4100Aluminum Alloy Sheet, Alclad 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad 7475-T761) Solution and Precipitation Heat Treated7475Current
AMS 4101Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T851) Solution Heat Treated, Stretched, and Precipitation Heat Treated2124Likely current
AMS 4107Aluminum Alloy Die Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74) Solution Heat Treated and Overaged7050Current
AMS 4108Aluminum Alloy Hand Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress Relieved, and Overaged7050Current
AMS 4109Aluminum Alloy Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.24Cr (7175-T736)7175Cancelled 2000
AMS 4111Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat Treated7049Current
AMS 4112Aluminum Alloy Bars, Rods and Wire (2024-T6)2024To confirm
AMS 4113Aluminum Alloy, Extruded Profiles 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated6061Likely current
AMS 4115Aluminum Alloy, Rolled or Cold-Finished, Bars, Rods, Wire, and Flash Welded Rings and Stock for Flash Welded Rings Annealed 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O)6061Likely current
AMS 4116Aluminum Alloy, Bars, Rods, and Wire 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4) Cold Finished, Solution Heat Treated and Naturally Aged6061Likely current
AMS 4117Aluminum Alloy, Rolled or Cold Finished, Bars, Rods, and Wire and Flash Welded Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6, -T651)6061Likely current
AMS 4118Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated2017Likely current
AMS 4120Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4); Solution Heat Treated, Cold Worked, and Naturally Aged (T351)2024Current
AMS 4121Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 4.5Cu - 0.85Si - 0.8Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated2014Current
AMS 4122Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T651) Solution and Precipitation Heat Treated7075Likely current
AMS 4123Aluminum Alloy Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated7075Likely current
AMS 4124Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged7075Likely current
AMS 4125Aluminum Alloy Die Forgings and Rolled or Forged Rings 0.90Si - 0.62Mg - 0.25Cr (6151-T6) Solution and Precipitation Heat Treated6151Current
AMS 4126Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated7075Current
AMS 4127Aluminum Alloy Forgings and Rolled or Forged Rings (6061-T6) Solution and Precipitation Heat Treated6061Current
AMS 4128Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching6061Likely current
AMS 4130Aluminum Alloy Die Forgings 4.4Cu - 0.85Si - 0.80Mn (2025-T6) Solution and Precipitation Heat Treated2025Current
AMS 4131Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged7075Likely current
AMS 4132Aluminum Alloy Die and Hand Forgings, Rolled Rings, and Forging Stock 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61) Solution and Precipitation Heat Treated2618Current
AMS 4133Aluminum Alloy Forgings and Rolled Rings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated2014Current
AMS 4134Aluminum Alloy Die Forgings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat Treated2014Likely current
AMS 4140Aluminum Alloy Die Forgings 4.0Cu - 2.0Ni - 0.68Mg (2018-T61) Solution and Precipitation Heat Treated (Stabilized Type)2018Stabilized 2014
AMS 4141Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated7075Current
AMS 4143Aluminum Alloy Forgings and Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6) Solution and Precipitation Heat Treated2219Likely current
AMS 4144Aluminum Alloy Hand Forgings and Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated2219Current
AMS 4146Aluminum Alloy Forgings and Rolled or Forged Rings and Forging Stock 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4) Solution Heat Treated and Naturally Aged6061Likely current
AMS 4147Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352) Solution Heat Treated, Stress Relieved by Compression, and Overaged7075Current
AMS 4148Aluminum Alloy Die Forgings (7175-T66) Solution and Precipitation Heat Treated7175Current
AMS 4149Aluminum Alloy Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and Precipitation Heat Treated7175Current
AMS 4150Aluminum Alloy Extrusions and Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6) Solution and Precipitation Heat Treated6061Likely current
AMS 4152Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated and Cold Worked2024Likely current
AMS 4153Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated2014Likely current
AMS 4154Aluminum Alloy Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6 7075-T6510 7075-T6511) Solution Heat Treated Stress Relieved by Stretching When Required and Precipitation Heat Treated7075Likely current
AMS 4156Aluminum Alloy, Extrusions 0.68Mg - 0.40Si (6063-T6) Solution and Precipitation Heat Treated6063Likely current
AMS 4157Aluminum Alloy Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511) Solution Heat Treated, Stress Relieved, and Overaged7049Current
AMS 4159Aluminum Alloy, Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T76511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged7049Likely current
AMS 4160Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed6061Likely current
AMS 4161Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged6061Likely current
AMS 4162Aluminum Alloy Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated, Stress Relief Stretched, Straightened, and Precipitation Heat Treated2219Current
AMS 4163Aluminum Alloy Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated and Stress-Relieved by Stretching, and Straightened2219Current
AMS 4164Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510) Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, Unstraightened2024Likely current
AMS 4165Aluminum Alloy, Extrusions 4.4Cu _ 1.5Mg _ 0.60Mn (2024-T3511) Solution Heat Treated, Cold Worked, Stress- Relieved by Stretching, and Straightened2024Likely current
AMS 4167Aluminum Alloy Extrusions (7075-T73511)7075To confirm
AMS 4169Aluminum Alloy Extrusions (7075-T6511)7075To confirm
AMS 4172Aluminum Alloy Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511 or T4510) Solution Heat Treated and Stress Relieved by Stretching6061Likely current
AMS 4173Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511 or T6510) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated6061Likely current
AMS 4174Aluminum Alloy Flash Welded Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated7075Likely current
AMS 4179Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated7175Current
AMS 4182Aluminum Alloy, Wire 5.0Mg - 0.12Mn - 0.12Cr (5056-0) Annealed5056Current
AMS 4186Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F) As Fabricated7075Current
AMS 4187Aluminum Alloy Bars and Rods, Rolled or Cold Finished (7075)7075To confirm
AMS 4193Aluminum Alloy Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T861) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated2024Likely current
AMS 4194Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024 -T361 Sheet/Plate with 1_آ% Alclad) Solution Heat Treated, 6% Cold Worked and Naturally Aged2024Likely current
AMS 4195Aluminum Alloy Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-T861 Flat Sheet; 1-1/2% Alclad 2024-T861 Plate) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated2024Likely current
AMS 4200Aluminum Alloy Plate 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T7351) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated7049Current
AMS 4201Aluminum Alloy Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated, Stress Relieved, and Overaged7050Current
AMS 4202Aluminum Alloy Plate 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T7351) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated7475Current
AMS 4203Aluminum Alloy, Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7351) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated7010Likely current
AMS 4204Aluminum Alloy Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7651) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated7010Current
AMS 4205Aluminum Alloy Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T73651 or 7010-T7451) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated7010Current
AMS 4206Aluminum Alloy, Plate (7055-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged7055Likely current
AMS 4207Aluminum Alloy Sheet, Alclad 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T61) Solution and Precipitation Heat Treated7475Current
AMS 4208Aluminum Alloy Sheet 6.0Cu - 0.40Zr (2004-F) As Rolled2004Likely current
AMS 4209Aluminum Alloy Sheet, Alclad 6.0Cu - 0.40Zr - (2004-F) As Rolled2004Likely current
AMS 4211Aluminum Alloy, Plate 6.2Zn - 1.9Cu - 2.1Mg - 0.10Zr (7040-T7451) Solution Heat Treated, Stress Relieved, and Overaged7040Likely current
AMS 4213Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated, Cold Worked and Naturally Aged2027Likely current
AMS 4216Aluminum Alloy, Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T6) Solution Heat Treated and Artificially Aged6013Likely current
AMS 4221Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated2124Likely current
AMS 4232Aluminum Alloy Extrusions 2.7Cu - 2.2Li - 0.12Zr (2090-T86) Solution Heat Treated Cold Worked and Precipitation Heat Treated2090Likely current
AMS 4243Aluminum Alloy Alclad Sheet 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (Alclad 7050-T76) Solution Heat Treated and Overaged7050Likely current
AMS 4247Aluminum Alloy Hand Forgings 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T7352) Solution Heat Treated Stress Relieved by Compression and Precipitation Heat Treated7049Likely current
AMS 4248Aluminum Alloy Hand Forgings and Rolled Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T652) Solution Heat Treated, Stress Relief Compressed, and Precipitation Heat Treated6061Current
AMS 4250Aluminum Alloy, Plate 8.1Zn - 2.3Mg - 1.0Cu - Zr (7449-T7651) Solution Heat Treated, Stress Relieved, and Overaged7449Likely current
AMS 4251Aluminum Alloy Sheet, 2.7Cu - 2.2Li - 0.12Zr (2090-T83), Solution Heat Treated, Cold Worked, and Precipitation Heat Treated2090Likely current
AMS 4252Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T7751) Solution Heat Treated, Stress Relieved, and Overaged7150Likely current
AMS 4259Aluminum Alloy, Sheet 2.4Li - 1.3Cu - 0.95Mg - 0.10Zr (8090-T6) Solution and Precipitation Heat Treated (Unrecrystallized) (Stabilized Type)8090Stabilized 2015
AMS 4268Aluminum Alloy Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn; (2024-T81 Sheet -T851 Plate) Solution Heat Treated Cold Worked and Artificially Aged2024Likely current
AMS 4269Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T361) Solution Heat Treated and Cold Worked2024Likely current
AMS 4270Aluminum Alloy, Alclad Sheet 4.1Cu - 1.4Mg - 0.45Mn (Alclad 2424-T3 Flat Sheet) Solution Heat Treated and Cold Worked2424Current
AMS 4271Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn; (2024-T861), Solution Heat Treated and Cold Worked, and Artificially Aged (Stabilized Type)2024Stabilized 2013
AMS 4272Aluminum Alloy, Alclad Sheet and Plate (Alclad 2029-T8) 3.6Cu - 0.30Mn - 0.95Mg - 0.40Ag - 0.12Zr Solution Heat Treated, Cold Worked and Aged2029Likely current
AMS 4273Aluminum Alloy, Sheet and Plate (2424-T3 Flat Sheet and 2424-T351 Plate) Solution Heat Treated and Cold Worked2424Likely current
AMS 4274Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-0) Annealed, Fine Grain2024Likely current
AMS 4276Aluminum Alloy Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-0) Annealed Fine Grained2024Likely current
AMS 4277Aluminum Alloy, Sheet 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-O) Annealed, Fine Grained7075Likely current
AMS 4278Aluminum Alloy Alclad Sheet 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-0) Annealed Fine Grained7075Likely current
AMS 4279Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-T4 Flat Sheet) Solution Heat Treated, High Formability2024Likely current
AMS 4293Aluminum Alloy Extrusions 7.9Zn - 1.6Cu - 2.2Mg - 0.16Cr (7249-T76511) Solution Heat Treated Stress-Relieved Straightened and Overaged7249Likely current
AMS 4295Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr (2219 - O, F, T31, T351, T37, T81, T851, T87) (Stabilized Type)2219Stabilized 2013
AMS 4296Aluminum Alloy, Alclad Sheet and Plate 4.3Cu - 1.4Mg - 0.60Mn (Alclad 2524-T3) Solution Heat Treated and Cold Worked2524Likely current
AMS 4297Aluminum Alloy Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024; -T4 Flat Sheet) Solution Heat Treated High Formability2024Likely current
AMS 4298Aluminum Alloy Alclad Sheet 3.8Cu - 1.0Mg - 0.30Mn - 0.60Zn (Alclad 2056-T3) Solution Heat Treated and Cold Worked2056Likely current
AMS 4299Aluminum Alloy, Plate (7449-T7951) 8.1Zn - 1.8Cu - 2.3Mg Solution Heat Treated, Stress Relieved, and Overaged7449Likely current
AMS 4305Aluminum Alloy, Extruded Profiles (7449-T79511) 8.1Zn - 1.8Cu - 2.2Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged7449Likely current
AMS 4306Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T6151) Solution Heat Treated, Stress Relieved, and Aged7150Likely current
AMS 4307Aluminum Alloy Extrusions (7150)7150Likely current
AMS 4310Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated7075Likely current
AMS 4311Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated7075Likely current
AMS 4312Aluminum Alloy, Rolled or Forged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T651, 6061-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated6061Likely current
AMS 4313Aluminum Alloy, Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T351, 2219-T352) Solution Heat Treated and Mechanically Stress Relieved2219Likely current
AMS 4314Aluminum Alloy Rings, Rolled or Forged 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T651, 2014-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated2014Likely current
AMS 4315Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T76 Sheet, -T7651 Plate) Solution and Precipitation Heat Treated7075Likely current
AMS 4316Aluminum Alloy, Alclad Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075; -T76 Sheet, -T7651 Plate) Solution and Precipitation Heat Treated7075Likely current
AMS 4317Aluminum Alloy, Extruded Bar, Rod, and Shapes 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075-T76(51X) Solution Heat Treated and Overaged7075Likely current
AMS 4319Aluminum Alloy, Rolled or Cold Finished, Bars and Rods 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T651) Solution Heat Treated, Stress Relieved, Artificially Aged4032Likely current
AMS 4320Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7149-T73) Solution and Precipitation Heat Treated7149Current
AMS 4321Aluminum Alloy Forgings 7.7zn - 2.5mg - 1.5cu - 0.16cr (7049-01) High Temperature Annealed7049Current
AMS 4323Aluminum Alloy, Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated7075Likely current
AMS 4324Aluminum Alloy, Extruded Rod, Bar and Profiles (7055-T74511) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress-Relieved, and Overaged7055Likely current
AMS 4325Aluminum Alloy, Extruded Wide Panel Profiles (7150-T77511) 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr Solution Heat Treated, Stress-Relieved, Straightened and Overaged7150Likely current
AMS 4326Aluminum Alloy, 2013, Extruded Bar, Rod, and Profiles 1.0 Mg - 0.80 Si - 1.8 Cu - 0.20 Cr (2013 -T6511) Solution Heat Treated, Stress-Relieved by Stretching, and Aged2013Likely current
AMS 4327Aluminum Alloy, Plate (2098-O) 3.5Cu - 1.1Li - 0.50Mg - 0.40Ag - 0.11Zr Annealed2098Likely current
AMS 4328Aluminum Alloy, Plate (2397-T87) 2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn Solution Heat Treated, Cold Worked, and Artificially Aged2397Likely current
AMS 4329Aluminum Alloy, Plate (7085-T7651) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged7085Likely current
AMS 4330Aluminum Alloy, Plate (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.12Zr Solution Heat Treated, Stretched, and Artificially Aged2297Likely current
AMS 4331Aluminum Alloy Extrusions 7.8Zn - 2.6Mg - 2.0Cu - 0.10Zr - (7068-T6511) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated7068Likely current
AMS 4332Aluminum Alloy, Extruded Profiles (7349-T76511) 8.1Zn - 1.7Cu - 2.2Mg - 0.16Zr Solution Heat Treated, Stress- Relieved, and Overaged7349Likely current
AMS 4333Aluminum Alloy, Die Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress- Relieved, and Overaged7050Likely current
AMS 4334Aluminum Alloy Forgings 7.8Zn - 2.2Mg - 1.6Cu - 0.15Cr (7249-T74 and T7452)7249Current
AMS 4335Forgings, Aluminum Alloys 2xxx and 7xxx, Heat-Treated, Finished-Part Properties: Short-Transverse Tensile Properties and Fracture ToughnessLikely current
AMS 4336Aluminum Alloy, Extruded Rod, Bar, and Profiles (7055-T76511) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress-Relieved, and Overaged7055Likely current
AMS 4337Aluminum Alloy, Extruded Profiles (7055-T77511) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged7055Likely current
AMS 4338Aluminum Alloy Extrusions 4.0Cu - 1.3Mg - 0.60Mn (2026-T3511) Solution Heat Treated and Stress Relieved by Stretching2026Likely current
AMS 4339Aluminum Alloy Rolled or Cold Finished Bars and Rods 4.4Cu - 1.5Mg - 0.60Mn (2024-T851) Solution Heat Treated Cold Worked and Artificially Aged2024Likely current
AMS 4340Aluminum Alloy Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T76511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged7050Current
AMS 4341Aluminum Alloy Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged7050Current
AMS 4342Aluminum Alloy Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511, formerly -T736511) Solution Heat Treated, Stress Relieved, and Overaged7050Current
AMS 4343Aluminum Alloy Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7149-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Overaged7149Current
AMS 4344Aluminum Alloy Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated Stress Relieved by Stretching Straightened and Overaged7175Likely current
AMS 4345Aluminum Alloy, Extrusions 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T77511) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged7150Likely current
AMS 4347Aluminum Alloy Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4) Solution Heat Treated and Naturally Aged6013Likely current
AMS 4351Aluminum Alloy Plate (7065-T7651) 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr Solution Heat Treated Stress-Relieved and Overaged7065Likely current
AMS 4354Aluminum Alloy Plate 7.9Zn _ 1.8Cu - 2.0Mg - 0.10Zr (7099-T7451) Solution Heat Treated Stress Relieved and Overaged7099Likely current
AMS 4356Aluminum Alloy Seamless Drawn Round Tubing 2.3 Cu - 8.0 Zn - 2.0 Mg - 0.16 Zr (7155-T76) Solution Heat Treated and Aged7155Likely current
AMS 4357Aluminum Alloy, Die Forgings 3.5Cu â__ 1.0Li - 0.04Mg â__ 0.35Mn â__ 0.45Ag â__ 0.12Zr (2050-T852) Solution Heat Treated, Cold Worked and Artificially Aged2050Likely current
AMS 4361Aluminum Alloy Plate (7065-T7451) 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr Solution Heat Treated Stress-Relieved and Overaged7065Likely current
AMS 4364Aluminum Alloy, Plate, 7.9Zn - 1.8Cu - 2.0Mg - 0.10Zr (7099-T7651) Solution Heat Treated, Stress Relieved, and Overaged7099Likely current
AMS 4365Aluminum Alloy, Plate 7.9Zn - 1.2Cu - 2.1Mg - 0.10Zr (7097-T7651) Solution Heat Treated, Stress Relieved, and Overaged7097Likely current
AMS 4368Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed Shapes 6061B/SiC/40p (3 ?m) (T1P)Likely current
AMS 4369Aluminum Alloy, Discontinuously Reinforced Extruded Bar, Rod, Wire and Shapes (2124A/SiC/25p (0.7 _خm) (T1P)Likely current
AMS 4372Aluminum Alloy, Plate 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T34) Solution Heat Treated and Stress Relieved2050Likely current
AMS 4373Aluminum Alloy, Rolled, Drawn or Cold Finished Bar, Rod, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -O or when ordered -F)2017Likely current
AMS 4378Aluminum Alloy, Plate (7160-T7651) 7.0Zn - 2.2Cu - 1.5Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged7160Likely current
AMS 4379Aluminum Alloy, Discontinuously Reinforced Extruded Bar, Rod, Wire and Shapes (2124A/SiC/25p (3 _خm) (T1P)Likely current
AMS 4401Aluminum Alloy Plate (7140-T7451) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated Stress Relieved and Overaged7140Likely current
AMS 4403Aluminum Alloy, Die Forgings 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress- Relieved, and Overaged7085Likely current
AMS 4405Aluminum Alloy, Alclad Sheet (6156-T4) 1.0Si - 0.90Cu - 0.60Mn - 0.90Mg Solution Heat Treated and Naturally Aged - UNS AA61566156Likely current
AMS 4407Aluminum Alloy Plate (7056-T7651) 9.1Zn - 1.6Cu - 1.9Mg Solution Heat Treated Stress Relieved and Overaged7056Likely current
AMS 4408Aluminum Alloy Plate (7140-T7651) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated Stress Relieved and Overaged7140Likely current
AMS 4409Aluminum Alloy, Plate 4.0Zn - 2.0Mg - 0.32Mn (7019-T651) Solution Heat Treated, Stress Relieved, and Artificially Aged 2021 AMS 0 929 AMS4457A Aluminum Alloy, Sheet 3.5Cu - 1.1Li - 0.50Mg - 0.40Ag - 0.12Zr (2098-T8) Solution Heat Treated, Cold Worked, and Artificially Aged7019, 2021, 2098Likely current
AMS 4411Aluminum Alloy Plate (7081-T7651) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged7081Likely current
AMS 4412Aluminum Alloy, Sheet 3.2Cu - 0.52Mg - 0.30Ag - 0.95 Li - 0.12Zr (2198-T8) Solution Heat Treated, Cold Worked, and Artificially Aged2198Likely current
AMS 4413Aluminum Alloy Plate 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T84) Solution Heat Treated Stress Relieved and Artificially Aged2050Likely current
AMS 4414Aluminum Alloy, Hand Forgings 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged7085Likely current
AMS 4415Aluminum Alloy Extrusions 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T76511, -T76510) Solution Heat Treated, Stress- Relieved, Straightened, and Overaged7136Likely current
AMS 4448Aluminum Alloy, Plate (7160-T7351) 7.0Zn - 2.2Cu - 1.5Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged7160Likely current
AMS 4456Aluminum Alloy, Hand Forgings 8.0Zn - 1.0Cu - 1.6Mg - 0.12Zr (7037-T7452) Solution Heat Treated, Compression Stress Relieved, and Overaged7037Likely current
AMS 4457Aluminum Alloy, Sheet 3.5Cu - 1.1Li - 0.50Mg - 0.40Ag - 0.12Zr (2098-T8) Solution Heat Treated, Cold Worked, and Artificially Aged2098To confirm
AMS 4458Aluminum Alloy, Plate (2.7 Cu - 1.8 Li - 0.7 Zn) 2099-T86 Solution Heat Treated, Cold Worked, and Artificially Aged2099Likely current
AMS 4461Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O, Sheet and Plate) Annealed; or when specified, â__As Fabricatedâ__ (2024-F)2024Likely current
AMS 4462Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T3 Sheet, -T351 Plate) Solution Heat Treated, Cold Worked and Naturally Aged2024Likely current
AMS 4463Aluminum Alloy, Plate (7255-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.12Zr Solution Heat Treated, Stress Relieved, and Overaged7255Likely current
AMS 4464Aluminum Alloy Plate (2624-T351) 4.1Cu - 1.4Mg - 0.6Mn Solution Heat Treated, Cold Worked and Naturally Aged2624Likely current
AMS 4466Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T361 Sheet and Plate) Solution Heat Treated, 6% Cold Worked, and Naturally Aged2024Likely current
AMS 4467Aluminum Alloy Sheet and Plate Alclad 4.4Cu 1.5Mg 0.60Mn (Alclad 2024 -T861 Sheet & Plate) Solution Heat Treated 6% Cold Worked and Artificially Aged2024Likely current
AMS 4468Aluminum Alloy, Plate 5.0Cu - 0.4Mn - 0.5Mg - 0.4Ag (2139-T84) Solution Heat Treated, Cold Worked, and Artificially Aged2139Likely current
AMS 4470Aluminum Alloy, Plate (7085-T7451) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged7085Likely current
AMS 4472Aluminum Alloy, Plate 4.0Cu - 1.0Li - 0.40Mg - 0.35Ag - 0.13Zr (2195-T34) Solution Heat Treated and Stress Relieved2195Likely current
AMS 4473Aluminum Alloy Plate (2624-T39) 4.1Cu - 1.4Mg - 0.6Mn Solution Heat Treated, Cold Worked and Naturally Aged2624Likely current
AMS 4474Aluminum Alloy, Sheet and Plate 4.0Cu - 1.0Li - 0.40Mg - 0.35Ag - 0.13Zr (2195-T8) Solution Heat Treated, Cold Worked, and Artificially Aged2195Likely current
AMS 4475Aluminum Alloy Coiled Sheet Alclad 4.4Cu 1.5Mg 0.60Mn (Alclad 2024; -T4 Coiled Sheet) Solution Heat Treated2024Likely current
AMS 4476Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-O) Annealed7075Likely current
AMS 4477Aluminum Alloy, Coiled Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-T4) Solution Treated2024Likely current
AMS 4478Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T81 Sheet, -T851 Plate) Solution Heat Treated, Cold Worked and Artificially Aged2024Likely current
AMS 4480Aluminum Alloy, Seamless Drawn Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged6061Likely current
AMS 4491Aluminum Alloy, Extrusions 4.4Cu _ 1.5Mg _ 0.60Mn (2024-T81) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated2024Likely current
AMS 4599Aluminum Alloy, Sheet, and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution and Precipitation Heat Treated (2219 -T81/-T851)2219Likely current
AMS 4600Aluminum Alloy Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated Cold Worked (8%) and Naturally Aged (2219 -T37)2219Likely current
AMS 4601Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold Worked and Naturally Aged (2219 -T31/-T351)2219Likely current
AMS 4613Aluminum Alloy, Sheet and Plate, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, Solution Heat Treated, Cold Worked (8%) and Precipitation Heat Treated (2219 -T87)2219Likely current
AMS 4617Aluminum Alloy Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73 7075-T73511 7075-T73510) Solution Heat Treated Stress Relieved by Stretching when required and Overaged7075Likely current
AMS 7488Rings, Flash Welded Aluminum and Aluminum AlloysLikely current
AMS-A-22771Aluminum Alloy Forgings, Heat TreatedLikely current
AMS-A-81596Aluminum Foil For Sandwich ConstructionCurrent
AMS-QQ-A-200Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specification for3003, 2014, 2024, 5083, 5086, 5454, 5456, 6061 …Current
AMS-QQ-A-200/1Aluminum Alloy 3003, Bar, Rod, Shapes, Tube, and Wire, Extruded3003Superseded 2010 (still common)ASTM B241, ASTM B221
AMS-QQ-A-200/2Aluminum Alloy 2014, Bar, Rod, Shapes, Tube, and Wire, Extruded2014Cancelled 2010 (still common)
AMS-QQ-A-200/3Aluminum Alloy 2024, Bar, Rod, Shapes, Tube, and Wire, Extruded2024Cancelled 2024 (still common)
AMS-QQ-A-200/4Aluminum Alloy 5083, Bar, Rod, Shapes, Tube, and Wire, Extruded5083Cancelled 2010 (still common)
AMS-QQ-A-200/5Aluminum Alloy 5086, Bar, Rod, Shapes, Tube, and Wire, Extruded (See Withdrawal Notice for Superseding Info)5086Superseded 2010 (still common)ASTM B241, ASTM B221
AMS-QQ-A-200/6Aluminum Alloy 5454, Bar, Rod, Shapes, Tube, and Wire, Extruded5454Cancelled 2010
AMS-QQ-A-200/7Aluminum Alloy 5456, Bar, Rod, Shapes, Tube, and Wire, Extruded5456Cancelled 2010
AMS-QQ-A-200/8Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and Wire, Extruded A960616061Cancelled 2024 (still common)
AMS-QQ-A-200/9Aluminum Alloy 6063, Bar, Rod, Shapes, Tube, and Wire, Extruded6063Cancelled 2009 (still common)
AMS-QQ-A-200/10Aluminum Alloy 6066, Bar, Rod, Shapes, Tube, and Wire, Extruded and ASTM-B221)6066Superseded 2010ASTM B241, ASTM B221
AMS-QQ-A-200/11Aluminum Alloy 7075, Bar, Rod, Shapes, Tube, and Wire, Extruded7075Cancelled 2024 (still common)
AMS-QQ-A-200/13Aluminum Alloy 7178, Bar, Rod, Shapes, Tube, and Wire, Extruded7178Current
AMS-QQ-A-200/14Aluminum Alloy, Bar, Rod, Shapes, and Wire, Extruded, 7178-T76 Improved Exfoliation Resistance7178Cancelled 2010
AMS-QQ-A-200/15Aluminum Alloy Bar, Rod, and Shapes, Extruded, 7075-T76 Improved Exfoliation Resistance7075Cancelled 2024 (still common)
AMS-QQ-A-200/16Aluminum Alloy, Structural Shapes, Extruded, 60616061Cancelled 2009 (still common)
AMS-QQ-A-200/17Aluminum Alloy 6162, Bar, Rod, Shapes, Tube, and Wire, Extruded6162Cancelled 2009
AMS-QQ-A-225Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Speci1100, 3003, 2011, 2014, 2017, 2024, 5052, 6061 …Current
AMS-QQ-A-225/1Aluminum Alloy Bar, Rod, and Wire; Rolled, Drawn or Cold Finished, 11001100Cancelled 2008 (still common)
AMS-QQ-A-225/2Aluminum Alloy Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished, 30033003Cancelled 2008 (still common)
AMS-QQ-A-225/3Aluminum Alloy Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 20112011Cancelled 2008 (still common)
AMS-QQ-A-225/4Aluminum Alloy, 2014, Bar, Rod, Wire and Special Shapes, Rolled, Drawn, or Cold Finished2014Current
AMS-QQ-A-225/5Aluminum Alloy, 2017, Bar, Rod, and Wire Rolled, Drawn, or Cold Finished2017Current
AMS-QQ-A-225/6Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished2024Current
AMS-QQ-A-225/7Aluminum Alloy 5052, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished5052Cancelled 2008 (still common)
AMS-QQ-A-225/8Aluminum Alloy 6061, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished6061Cancelled 2012 (still common)
AMS-QQ-A-225/9Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished7075Current
AMS-QQ-A-225/10Aluminum Alloy 6262, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished6262Cancelled 2008 (still common)
AMS-QQ-A-250Aluminum and Aluminum Alloy, Plate and SheetCurrent
AMS-QQ-A-250/1Aluminum 1100, Plate and Sheet1100Cancelled 2009 (still common)
AMS-QQ-A-250/2Aluminum Alloy 3003, Plate and Sheet3003Cancelled 2009 (still common)
AMS-QQ-A-250/3Aluminum Alloy Alclad 2014, Plate and Sheet2014Current
AMS-QQ-A-250/4Aluminum Alloy 2024, Plate and Sheet2024Current
AMS-QQ-A-250/5Aluminum Alloy Alclad 2024, Plate and Sheet2024Current
AMS-QQ-A-250/6Aluminum Alloy 5083, Plate and SheetLUMINUM ALLOY 5083, PLATE AND SHEET5083Current
AMS-QQ-A-250/7Aluminum Alloy 5086, Plate and Sheet5086Cancelled 2009 (still common)
AMS-QQ-A-250/8Aluminum Alloy 5052, Plate and Sheet5052Current
AMS-QQ-A-250/9Aluminum Alloy 5456, Plate and Sheet5456Superseded 2022ASTM B209, ASTM B928
AMS-QQ-A-250/10Aluminum Alloy 5454, Plate and Sheet5454Cancelled 2010
AMS-QQ-A-250/11Aluminum Alloy 6061, Plate and Sheet6061Cancelled 2008 (still common)AMS 4025, AMS 4026, AMS 4027, ASTM B209
AMS-QQ-A-250/12Aluminum Alloy 7075, Plate and Sheet7075Current
AMS-QQ-A-250/13Aluminum Alloy Alclad 7075, Plate and Sheet7075Superseded 2012 (still common)AMS 4049
AMS-QQ-A-250/14Aluminum Alloy 7178, Plate and Sheet7178Current
AMS-QQ-A-250/15Aluminum Alloy Alclad 7178, Plate and Sheet7178Current
AMS-QQ-A-250/18Aluminum Alloy, Alclad One Side 7075, Plate and Sheet7075Current
AMS-QQ-A-250/19Aluminum Alloy 5086, Plate and Sheet for Sea Water Applications5086Cancelled 2006 (still common)
AMS-QQ-A-250/20Aluminum Alloy 5456, Plate and Sheet, for Sea Water Applications5456Cancelled 2006
AMS-QQ-A-250/21Aluminum Alloy, 7178-T76, Plate and Sheet Improved Exfoliation Resistant7178Current
AMS-QQ-A-250/22Aluminum Alloy, 7178-T76, Alclad Plate and Sheet, Improved Exfoliation Resistant7178Cancelled 2010
AMS-QQ-A-250/24Aluminum Alloy, 7075, Plate and Sheet (Improved Exfoliation Resistant)7075Cancelled 2010 (still common)
AMS-QQ-A-250/25Aluminum Alloy, Alclad 7075 Plate and Sheet Improved Exfoliation Resistant (See Withdrawal Notice for Replacem7075Cancelled 2010 (still common)
AMS-QQ-A-250/26Aluminum Alloy, 7011 Alclad, 7075 Plate and Sheet7011, 7075Cancelled 2009 (still common)
AMS-QQ-A-250/28Aluminum Alloy, 7011 Alclad 7178 Plate and Sheet7011, 7178Current
AMS-QQ-A-250/29Aluminum Alloy 2124, Plate2124Current
AMS-QQ-A-250/30Aluminum Alloy 2219, Plate and Sheet2219Current
AMS-QQ-A-367Aluminum Alloy Forgings2014, 2618, 6061, 7049, 7075Current
AMS-QQ-A-430Aluminum Alloy Wire and Rod for Rivets and Cold Heading2117, 2017, 2024To confirm
AMS-T-7081Tube, Aluminum Alloy, Seamless, Round, Drawn, 6061, Aircraft Hydraulic Quality6061Cancelled 2012
AMS-WW-T-700Tube, Aluminum And Aluminum Alloy, Drawn, Seamless, General Specification For1100, 3003, 2024, 5052, 5086, 6061, 7075Current
AMS-WW-T-700/1Tube, Aluminum, Drawn, Seamless, 11001100Cancelled 2009 (still common)
AMS-WW-T-700/2Tube, Aluminum Alloy, Drawn, Seamless, 30033003Cancelled 2009 (still common)
AMS-WW-T-700/3Tube, Aluminum Alloy, Drawn, Seamless, 20242024Current
AMS-WW-T-700/4Tube, Aluminum Alloy, Drawn, Seamless, 50525052Current
AMS-WW-T-700/5Tube, Aluminum Alloy, Drawn, Seamless, 50865086Current
AMS-WW-T-700/6Tube, Aluminum Alloy, Drawn, Seamless, 60616061Current
AMS-WW-T-700/7Tube, Aluminum Alloy, Drawn, Seamless, 70757075Current
ASME SB-209Specification for Aluminum and Aluminum-Alloy Sheet and Plate3003, 5052, 5083, 5086, 5454, 5456, 6061Current
ASME SB-210Aluminum and Aluminum-Alloy Drawn Seamless Tubes6061, 3003, 5052Current
ASME SB-211Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire6061, 2024, 3003Current
ASME SB-221Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes6061, 6063, 5083, 5086, 3003Current
ASME SB-234Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condenser and Heat ExchangersCurrent
ASME SB-241Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube6061, 3003, 5083, 5086, 5454, 6063Current
ASME SB-247Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings6061, 3003, 5083Current
ASME SB-313Aluminum and Aluminum-Alloy Round Welded TubesCurrent
ASTM B209Aluminum and Aluminum-Alloy Sheet and Plate1100, 1060, 1350, 2014, 2024, 2219, 3003, 3004 …Current
ASTM B210Aluminum and Aluminum-Alloy Drawn Seamless Tubes1060, 1100, 2014, 2024, 3003, 5052, 5083, 5086 …Current
ASTM B211Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire1100, 2011, 2014, 2017, 2024, 2117, 3003, 5052 …Current
ASTM B221Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes1100, 2014, 2024, 2219, 3003, 5083, 5086, 5454 …Current
ASTM B234Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers1060, 3003, 5052, 5454, 5083, 6061Current
ASTM B241Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube1060, 1100, 3003, 5083, 5086, 5454, 5456, 6061 …Current
ASTM B247Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings2014, 2018, 2025, 2219, 2618, 3003, 5083, 6061 …Current
ASTM B308Aluminum-Alloy 6061-T6 Standard Structural Profiles6061Current
ASTM B313Aluminum and Aluminum-Alloy Round Welded Tubes1100, 3003, 5052, 6061, 6063Withdrawn 2018
ASTM B316Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods1100, 2017, 2117, 2024, 3003, 5056, 6053, 6061 …Current
ASTM B317Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)6101, 6061, 6063Current
ASTM B345Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems3003, 6061, 6063Withdrawn 2017ASTM B241
ASTM B429Aluminum-Alloy Extruded Structural Pipe and Tube6061, 6063Current
ASTM B479Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications1100, 1145, 1235, 8011Current
ASTM B483Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications1100, 3003, 5052, 6061, 6063Current
ASTM B491Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications1100, 3003, 6061, 6063Current
ASTM B547Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube3003, 5052, 5083, 5454, 6061Withdrawn 2019
ASTM B632Aluminum-Alloy Rolled Tread Plate3003, 5052, 6061Current
ASTM B666Identification Marking of Aluminum and Magnesium ProductsCurrent
ASTM B928High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments5083, 5086, 5456, 5383Current
EN 485-2Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties5083, 5052, 6082, 6061, 7075To confirm
EN 573-3Aluminium and aluminium alloys. Chemical composition and form of wrought productsTo confirm
EN 754-2Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties2011, 6060, 6082, 7075To confirm
EN 755-2Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties6060, 6063, 6082, 6005, 7075, 2011, 5083To confirm
EN 1386Aluminium and aluminium alloys. Tread plate. Specifications5754, 5052, 3003To confirm
JIS H4040Aluminium and aluminium alloy rods, bars and wires6061, 2017, 7075, 2011To confirm
JIS H4080Aluminium and aluminium alloy extruded tubes and cold-drawn tubes6061, 6063To confirm
JIS H4100Aluminium and aluminium alloy extruded shapes6061, 6063To confirm
MIL-A-148Aluminum FoilCancelled 1974QQ-A-1876
MIL-A-8097Aluminum Alloy Forgings, 76S for Aircraft Applications (Supersedes 11352) (No Superseding Document)Cancelled 1953
MIL-A-8701Aluminum Alloy Sheet, X5356 (XC56S) and 5083 (LK183) Alloys (ASG)5083Cancelled 1961
MIL-A-8825Aluminum Alloy Bars and Shapes, Extruded, 70797079Cancelled 1961QQ-A-200/12
MIL-A-8877Aluminum Alloy Sheet and Plate, 70797079Cancelled 1962QQ-A-250/17
MIL-A-8882Aluminum Alloy Plate and Sheet, 20202020Cancelled 1974
MIL-A-8902Aluminum Alloy Plate and Sheet, Alclad One Side 70757075Cancelled 1960QQ-A-250
MIL-A-8920Aluminum Alloy Plate and Sheet, 2219 (ASG)2219Cancelled 1966QQ-A-250/30
MIL-A-8923Aluminum Alloy Sheet, Alclad 70797079Cancelled 1977
MIL-A-9180Aluminum Alloy Plate and Sheet, 71787178Cancelled 1961QQ-A-250/14
MIL-A-9183Aluminum Alloy Plate and Sheet, Clad 71787178Cancelled 1961QQ-A-250/15
MIL-A-9186Aluminum Alloy Bars, Rods and Shapes, Extruded, 71787178Cancelled 1961QQ-A-200/13
MIL-A-11267Aluminum Alloy Sheet, 82808280Cancelled 1997
MIL-A-16994Aluminum Alloy Sheets, Flat, Porcelain Enamel CoatedCancelled 1955
MIL-A-17357Aluminum Alloy 5154 (A54S) Plates and Sheets5154Cancelled 1961MIL-A-21598
MIL-A-17358Aluminum Alloy Plate and Sheet, 5083 (Use QQ-A-250/65083Cancelled 1961QQ-A-250/6
MIL-A-18024Aluminum Alloy Plates XC56SCancelled 1960
MIL-A-18593Aluminum Alloy Bars, Rods, and Structural and Special Shaped Sections-Extruded, 6063 (63S)6063Cancelled 1958QQ-A-274
MIL-A-19005Aluminum Alloy Bar, Rod and Structural and Special Shaped Section-Extruded, 5083(K--183)5083Cancelled 1960QQ-A-200/4
MIL-A-19065Aluminum Alloy Bars, Rods, and Structural Shaped Sections, Extruded 5356 (C56S)5356Cancelled 1960
MIL-A-19070Aluminum Alloy Plate and Sheet, 5086 (K186)5086Cancelled 1957
MIL-A-19680Aluminum Alloy 5254 Plate and Sheet5254Cancelled 1961
MIL-A-19842Aluminum Alloy Plate and Sheet, 54565456Cancelled 1961QQ-A-250
MIL-A-20142Aluminum Alloy (Aluminum-Manganese), Plate, Floor, RolledCancelled 1952MIL-F-17132
MIL-A-21170Aluminum Alloy Bar, Rod, and Structuralshaped Sections-Rolled or Extruded, 54565456Cancelled 1961
MIL-A-21579Aluminum Alloy Bars, Rods, and Structural Shapes-Rolled or Extruded, 50865086Cancelled 1961
MIL-A-21598Aluminum Alloy Plate and Sheet, 54545454Cancelled 1960QQ-A-250
MIL-A-21599Aluminum Alloy Bars, Rods, and Structural Shapes-ROLLED or Extruded, 54545454Cancelled 1961
MIL-A-22771Aluminum Alloy Forgings, Heat Treated2014, 2618, 6061, 7049, 7075Cancelled 1999 (still common)AMS-A-22771
MIL-A-25493Aluminum Alloy Bars, Rods, and Shapes, Extruded, 60666066Cancelled 1963
MIL-A-25994Aluminum Alloy Angles, Channels, I and Z Beams, Extruded or Rolled, Structural ShapesCancelled 1959QQ-A-200
MIL-A-46027Armor Plate, Aluminum Alloy, Weldable 5083 and 54565083, 5456SupersededMIL-DTL-46027
MIL-A-46104Aluminum Alloy Bar, Rod, Shapes, and Tube, Extruded, 60706070Cancelled 1992
MIL-A-52174Aluminum Alloy Duct SheetCancelled 1992ASTM B209, ASTM B209
MIL-A-52242Aluminum Alloy Extruded Rod, Bar, and Shapes, 70017001Cancelled 1988
MIL-A-63547Aluminum Alloy 7475, Rod7475Cancelled 2011
MIL-A-81596Aluminum Foil for Sandwich ConstructionCancelled 1998AMS-A-81596
MIL-B-11582Base Plate, Theodolite: AluminumCancelled 2021
MIL-B-19780Bus Bar, Aluminum AlloyCancelled 1961
MIL-D-18047Aluminum Alloy Bars, Rods,and Structural and Special Shaped Sections-Extruded, 6063 (63S)6063Cancelled 1958QQ-A-274
MIL-DTL-25995Pipe, Aluminum Alloy, Drawn or ExtrudedCurrent
MIL-DTL-46027Armor Plate, Aluminum Alloy, Weldable 5083, 5456 (and later 5059)5083, 5456Current
MIL-DTL-46083Armor Plate, Aluminum Alloy, Weldable 5083/5456 (identity recalled)5083, 5456Current
MIL-DTL-46192Armor Plate, Aluminum Alloy, 25192519Cancelled 2024MIL-DTL-32341, MIL-DTL-32375
MIL-F-17132Floor Plate, Aluminum Alloy (6061) Rolled6061Cancelled 1980
MIL-S-7811Sandwich Construction, Aluminum Alloy Faces, Aluminum Foil Honeycomb CoreCancelled 1979
MIL-S-47265Sheet, Perforated, Aluminum AlloyCancelled 1979
MIL-T-7081Tube, Aluminum Alloy, Seamless, Round, Drawn 6061, Aircraft Hydraulic Qual Ity6061Cancelled 1999AMS-T-7081
MIL-T-21494Tube, Aluminum Alloy 5086, Round, Seamless (extruded or Drawn)5086Cancelled 1961WW-T-700/5
MIL-T-21597Tube, Aluminum Alloy 5456, Round, Seamless (extruded or Drawn)5456Cancelled 1961
MIL-T-46155Tube, Aluminum Alloy, Drawn, Seamless, 6063, T8326063Cancelled 1975ASTM B210
MIL-T-52234Tube, Aluminum Alloy 5083 and 5086, Square, Seamless, Extruded or Drawn5083, 5086Cancelled 1962
MIL-W-4471Wire, Nickel-Copper-Aluminum Alloy, Non-MagneticCancelled 1952QQ-N-286
MIL-W-7072Wire, Electric, 600-VOLT, Aluminum, Aircraft, General Specification for (ASG)Cancelled 1997
MIL-W-7986Wire and Rod, Aluminum and Aluminum Alloy, for Die HeadingCancelled 1961QQ-A-430
QQ-A-200Aluminum Alloy Bar, Rod, Shapes, Tube and Wire, Extruded, General Specification For3003, 2014, 2024, 5083, 5086, 5454, 5456, 6061 …Cancelled 2002 (still common)ASTM B241, ASTM B221, ASTM B308, AMS-QQ-A-200
QQ-A-200/1Aluminum Alloy 3003, Bar, Rod, Shapes, Tube and Wire, Extruded3003Cancelled 2002 (still common)ASTM B241, ASTM B221, AMS-QQ-A-200/1
QQ-A-200/2Aluminum Alloy 2014, Bar, Rod, Shapes, Tube and Wire, Extruded2014Cancelled 2002 (still common)ASTM B241, ASTM B221, AMS-QQ-A-200/2
QQ-A-200/3Aluminum Alloy 2024, Bar, Rod, Shapes, Tube and Wire, Extruded2024Cancelled 2002 (still common)ASTM B221, ASTM B241, AMS-QQ-A-200/3
QQ-A-200/4Aluminum Alloy 5083, Bar, Rod, Shapes, Tube and Wire, Extruded5083Cancelled 2002 (still common)ASTM B241, ASTM B221, AMS-QQ-A-200/4
QQ-A-200/5Aluminum Alloy 5086, Bar, Rod, Shapes, Tube and Wire, Extruded5086Cancelled 2002 (still common)ASTM B241, ASTM B221, AMS-QQ-A-200/5
QQ-A-200/6Aluminum Alloy 5454, Bar, Rod, Shapes, Tube and Wire, Extruded5454Cancelled 2002ASTM B221, ASTM B241, AMS-QQ-A-200/6
QQ-A-200/7Aluminum Alloy 5456, Bar, Rod, Shapes, Tube and Wire, Extruded5456Cancelled 2002ASTM B241, ASTM B221, AMS-QQ-A-200/7
QQ-A-200/8Aluminum Alloy 6061, Bar, Rod, Shapes, Tube and Wire, Extruded6061Cancelled 2002 (still common)ASTM B241, ASTM B221, AMS-QQ-A-200/8
QQ-A-200/9Aluminum Alloy 6063, Bar, Rod, Shapes, Tube and Wire, Extruded6063Cancelled 2002 (still common)ASTM B241, ASTM B221, AMS-QQ-A-200/9
QQ-A-200/10Aluminum Alloy 6066, Bar, Rod, Shapes, Tube and Wire, Extruded6066Cancelled 2002AMS-QQ-A-200/10, ASTM B241, ASTM B221
QQ-A-200/11Aluminum Alloy 7075, Bar, Rod, Shapes, Tube and Wire, Extruded7075Cancelled 2002 (still common)AMS-QQ-A-200/11, ASTM B241, ASTM B221
QQ-A-200/12Aluminum Alloy 7079, Bar, Rod, Shapes, Tube and Wire, Extruded7079Cancelled 1995
QQ-A-200/13Aluminum Alloy 7178, Bar, Rod, Shapes, Tube and Wire, Extruded7178Cancelled 2002AMS-QQ-A-200/13, ASTM B241, ASTM B221
QQ-A-200/14Aluminum Alloy 7178-T76 (Improved Exfoliation Resistance), Bar, Rod, Shapes, Tube and Wire, Extruded7178Cancelled 2002AMS-QQ-A-200/14, ASTM B221
QQ-A-200/15Aluminum Alloy 7075-T76 (Improved Exfoliation Resistance), Bar, Rod, Shapes, Tube and Wire, Extruded7075Cancelled 2002 (still common)AMS-QQ-A-200/15, ASTM B221
QQ-A-200/16Aluminum Alloy 6061, Bar, Rod, Shapes, Tube and Wire, Extruded6061Cancelled 2002 (still common)AMS-QQ-A-200/16, ASTM B308
QQ-A-200/17Aluminum Alloy 6162, Bar, Rod, Shapes, Tube and Wire, Extruded6162Cancelled 2002AMS-QQ-A-200/17, ASTM B241, ASTM B221
QQ-A-225Aluminum Alloy Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished, General Specification For1100, 3003, 2011, 2014, 2017, 2024, 5052, 6061 …Cancelled 1998 (still common)ASTM B211, AMS-QQ-A-225
QQ-A-225/1Aluminum 1100, Bar, Rod and Wire; Rolled, Drawn or Cold Finished1100Cancelled 1998 (still common)AMS-QQ-A-225, ASTM B211
QQ-A-225/2Aluminum Alloy 3003, Bar, Rod and Wire; Rolled, Drawn or Cold Finished3003Cancelled 1998 (still common)AMS-QQ-A-225, ASTM B211
QQ-A-225/3Aluminum Alloy 2011, Bar, Rod and Wire; Rolled, Drawn or Cold Finished2011Cancelled 1998 (still common)AMS-QQ-A-225, ASTM B211
QQ-A-225/4Aluminum Alloy 2014, Bar, Rod and Wire; Rolled, Drawn or Cold Finished2014Cancelled 1998 (still common)AMS-QQ-A-225, ASTM B211
QQ-A-225/5Aluminum Alloy 2017, Bar, Rod and Wire; Rolled, Drawn or Cold Finished2017Cancelled 1998 (still common)AMS-QQ-A-225, ASTM B211
QQ-A-225/6Aluminum Alloy 2024, Bar, Rod and Wire; Rolled, Drawn or Cold Finished2024Cancelled 1998 (still common)AMS-QQ-A-225, ASTM B211
QQ-A-225/7Aluminum Alloy 5052, Bar, Rod and Wire; Rolled, Drawn or Cold Finished5052Cancelled 1998 (still common)AMS-QQ-A-225, ASTM B211
QQ-A-225/8Aluminum Alloy 6061, Bar, Rod and Wire; Rolled, Drawn or Cold Finished6061Cancelled 1998 (still common)AMS-QQ-A-225, ASTM B211
QQ-A-225/9Aluminum Alloy 7075, Bar, Rod and Wire; Rolled, Drawn or Cold Finished7075Cancelled 1998 (still common)AMS-QQ-A-225, ASTM B211
QQ-A-225/10Aluminum Alloy 6262, Bar, Rod and Wire; Rolled, Drawn or Cold Finished6262Cancelled 1998 (still common)AMS-QQ-A-225, ASTM B211
QQ-A-250Aluminum and Aluminum Alloy Plate and Sheet (general specification)2014, 2024, 5052, 5083, 6061, 7075Cancelled 2005 (still common)AMS-QQ-A-250, ASTM B209
QQ-A-250/1Aluminum 1100, Plate and Sheet1100Cancelled 2005 (still common)AMS-QQ-A-250/1, ASTM B209
QQ-A-250/2Aluminum Alloy 3003, Plate and Sheet3003Cancelled 2005 (still common)AMS-QQ-A-250/2, ASTM B209
QQ-A-250/3Aluminum Alloy Alclad 2014, Plate and Sheet2014Cancelled 2005 (still common)AMS-QQ-A-250/3, ASTM B209
QQ-A-250/4Aluminum Alloy 2024, Plate and Sheet2024Cancelled 2005 (still common)AMS-QQ-A-250/4, ASTM B209
QQ-A-250/5Aluminum Alloy Alclad 2024, Plate and Sheet2024Cancelled 2005 (still common)AMS-QQ-A-250/5, ASTM B209
QQ-A-250/6Aluminum Alloy 5083, Plate and Sheet5083Cancelled 2005 (still common)AMS-QQ-A-250/6, ASTM B209
QQ-A-250/7Aluminum Alloy 5086, Plate and Sheet5086Cancelled 2005 (still common)AMS-QQ-A-250/7, ASTM B209
QQ-A-250/8Aluminum Alloy 5052, Plate and Sheet5052Cancelled 2005 (still common)AMS-QQ-A-250/8, ASTM B209
QQ-A-250/9Aluminum Alloy 5456, Plate and Sheet5456Cancelled 2005 (still common)AMS-QQ-A-250/9, ASTM B209
QQ-A-250/10Aluminum Alloy 5454, Plate and Sheet5454Cancelled 2005 (still common)AMS-QQ-A-250/10, ASTM B209
QQ-A-250/11Aluminum Alloy 6061, Plate and Sheet6061Cancelled 2005 (still common)AMS-QQ-A-250/11, ASTM B209
QQ-A-250/12Aluminum Alloy 7075, Plate and Sheet7075Cancelled 2005 (still common)AMS-QQ-A-250/12, ASTM B209
QQ-A-250/13Aluminum Alloy Alclad 7075, Plate and Sheet7075Cancelled 2005 (still common)AMS-QQ-A-250/13, ASTM B209
QQ-A-250/14Aluminum Alloy 7178, Plate and Sheet7178Cancelled 2005AMS-QQ-A-250/14, ASTM B209
QQ-A-250/15Aluminum Alloy Alclad 7178, Plate and Sheet7178Cancelled 2005AMS-QQ-A-250/15, ASTM B209
QQ-A-250/16Aluminum Alloy 2020, Plate and Sheet2020Cancelled 2005AMS-QQ-A-250/16, ASTM B209
QQ-A-250/17Aluminum Alloy 7079, Plate and Sheet7079Cancelled 2005AMS-QQ-A-250/17, ASTM B209
QQ-A-250/18Aluminum Alloy Alclad 7075, Plate and Sheet (Alclad One Side)7075Cancelled 2005 (still common)AMS-QQ-A-250/18, ASTM B209
QQ-A-250/19Aluminum Alloy 5086, Plate and Sheet for Sea Water Application5086Cancelled 1990 (still common)ASTM B209
QQ-A-250/20Aluminum Alloy 5456, Plate and Sheet, for Sea Water Application5456Cancelled 1980ASTM B209
QQ-A-250/21Aluminum Alloy 7178-T76 (Improved Exfoliation Resistance), Plate and Sheet7178Cancelled 2005AMS-QQ-A-250/21, ASTM B209
QQ-A-250/22Aluminum Alloy Alclad 7178-T76 (Improved Exfoliation Resistance), Plate and Sheet7178Cancelled 2005AMS-QQ-A-250/22, ASTM B209
QQ-A-250/23Aluminum Alloy Alclad 7079, Plate and Sheet (Alclad One Side)7079Cancelled 2005AMS-QQ-A-250/23, ASTM B209
QQ-A-250/24Aluminum Alloy 7075, Plate and Sheet (Improved Exfoliation Resistance)7075Cancelled 2005 (still common)AMS-QQ-A-250/24, ASTM B209
QQ-A-250/25Aluminum Alloy Alclad 7075, Plate and Sheet (Improved Exfoliation Resistance)7075Cancelled 2005 (still common)AMS-QQ-A-250/25, ASTM B209
QQ-A-250/26Aluminum Alloy Alclad 7075, Plate and Sheet7075Cancelled 2005 (still common)AMS-QQ-A-250/26, ASTM B209
QQ-A-250/27Aluminum Alloy Alclad 7079, Plate and Sheet7079Cancelled 2005AMS-QQ-A-250/27, ASTM B209
QQ-A-250/28Aluminum Alloy Alclad 7178, Plate and Sheet7178Cancelled 2005AMS-QQ-A-250/28, ASTM B209
QQ-A-250/29Aluminum Alloy 2124, Plate and Sheet2124Cancelled 2005 (still common)AMS-QQ-A-250/29, ASTM B209
QQ-A-250/30Aluminum Alloy 2219, Plate and Sheet2219Cancelled 2005 (still common)AMS-QQ-A-250/30, ASTM B209
QQ-A-255Aluminum Alloy Plates and Sheets Alclad 2014 (R301,CLAD 14S)2014Cancelled 1958QQ-A-250/3
QQ-A-261Aluminum Alloy Bar, Rod and Shapes, Extruded 20142014Cancelled 1963QQ-A-200/2
QQ-A-266Aluminum Alloy Bars, Rods, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished, 20142014Cancelled 1963QQ-A-225/4
QQ-A-267Aluminum Alloy Bar, Rod and Shapes, Extruded 20242024Cancelled 1963QQ-A-200/3
QQ-A-268Aluminum Alloy Bar, Rod and Wire, Rolled, Drawn, or Cold Finished, 20242024Cancelled 1963QQ-A-225/6
QQ-A-270Aluminum Alloy, Bar, Rod and Shapes, Extruded 6061, 60626061, 6062Cancelled 1963QQ-A-200/8
QQ-A-274Aluminum Alloy Bar, Rod, Shape, Extruded 60636063Cancelled 1963QQ-A-200/9
QQ-A-277Aluminum Alloy Bar, Rod and Shapes, Extruded 70757075Cancelled 1963QQ-A-200/11
QQ-A-282Aluminum Alloy Bar, Rod, Wire, and Special Shapes, Rolled, Drawn, or Cold Finished, 70757075Cancelled 1963QQ-A-225/9
QQ-A-283Aluminum Alloy Plate and Sheet 70757075Cancelled 1963QQ-A-250/12
QQ-A-287Aluminum Alloy Plate and Sheet, ALCLAD 70757075Cancelled 1963QQ-A-250/13
QQ-A-315Aluminum Alloy Bar, Rod and Wire, Rolled, Drawn, or Cold Finished, 50525052Cancelled 1963QQ-A-225/7
QQ-A-318Aluminum Alloy Plate and Sheet 50525052Cancelled 1963QQ-A-250/8
QQ-A-325Aluminum Alloy Bar, Rods, Wire, and Special Shapes, Rolled, Drawn, or Cold Finished, 60616061Cancelled 1963QQ-A-225/8
QQ-A-327Aluminum Alloy Plate and Sheet 60616061Cancelled 1963QQ-A-250/11
QQ-A-351Aluminum Alloy Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 20172017Cancelled 1961QQ-A-225/5
QQ-A-355Aluminum Alloy, Plate and Sheet 20242024Cancelled 1963QQ-A-250/4
QQ-A-356Aluminum Alloy Bars, Rods and Wire, Rolled, Drawn, or Cold Finished, 30033003Cancelled 1960QQ-A-225
QQ-A-357Aluminum Alloy Bar, Rod and Shapes, Extruded 30033003Cancelled 1963QQ-A-200/1
QQ-A-359Aluminum Alloy Plate and Sheet 30033003Cancelled 1958
QQ-A-362Aluminum Alloy Plate and Sheet, Alclad 20242024Cancelled 1963QQ-A-250/5
QQ-A-365Aluminum Alloy Bar, Rod, and Wire, (Free-Machining) 20112011Cancelled 1963QQ-A-225/3
QQ-A-367Aluminum Alloy Forgings2014, 2618, 6061, 7049, 7075Cancelled 2001 (still common)AMS-QQ-A-367
QQ-A-411Aluminum Alloy Bar, Rod and Wire, Rolled, Drawn, or Cold Finished 11001100Cancelled 1963QQ-A-225/1
QQ-A-430Aluminum Alloy Wire and Rod for Rivets and Cold Heading1100, 2017, 2117, 2024, 5056, 6053, 6061, 7075Inactive for new design 2019ASTM B316, AMS-QQ-A-430
QQ-A-561Aluminum Alloy Plate and Sheet, 11001100Cancelled 1963QQ-A-250/1
QQ-A-1876Aluminum foil (federal specification)1100, 1145CurrentASTM B479
WW-T-700Tube, Aluminum and Aluminum Alloy, Drawn, Seamless, General Specification For1100, 3003, 2024, 5052, 5086, 6061, 7075Cancelled 2004 (still common)AMS-WW-T-700
WW-T-700/1Aluminum 1100, Tube, Drawn, Seamless1100Cancelled 2004 (still common)AMS-WW-T-700/1
WW-T-700/2Aluminum Alloy 3003, Tube, Drawn, Seamless3003Cancelled 2004 (still common)AMS-WW-T-700/2
WW-T-700/3Aluminum Alloy 2024, Tube, Drawn, Seamless2024Cancelled 2004 (still common)AMS-WW-T-700/3
WW-T-700/4Aluminum Alloy 5052, Tube, Drawn, Seamless5052Cancelled 2004 (still common)AMS-WW-T-700/4
WW-T-700/5Aluminum Alloy 5086, Tube, Drawn, Seamless5086Cancelled 2004 (still common)AMS-WW-T-700/5
WW-T-700/6Aluminum Alloy 6061, Tube, Drawn, Seamless6061Cancelled 2004 (still common)AMS-WW-T-700/6
WW-T-700/7Aluminum Alloy 7075, Tube, Drawn, Seamless7075Cancelled 2004 (still common)AMS-WW-T-700/7
Aluminum, cast: 57 specs
SpecTitleAlloysStatusReplaced by
AMS 4210Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T51) Precipitation Heat Treated355.0Likely current
AMS 4212Aluminum Alloy Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated355.0Likely current
AMS 4214Castings, Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and Overaged355.0Likely current
AMS 4215Aluminum Alloy Castings 5.0Si - 1.2Cu - 0.5Mg (C355.0-T6) Solution and Precipitation Heat TreatedC355.0Current
AMS 4217Aluminum Alloy, Castings 7.0Si - 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated356.0Likely current
AMS 4218Aluminum Alloy Castings 7.0Si - 0.35Mg (A356.0-T6) (Formerly T6P Temper) Solution and Precipitation Heat TreatedA356.0Likely current
AMS 4219Aluminum Alloy Castings 7.0Si - 0.55Mg - 0.12Ti - 0.06Be (A357.0 T6) Solution and Precipitation Heat TreatedA357.0Likely current
AMS 4223Aluminum Alloy, Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally AgedA201.0Likely current
AMS 4225Aluminum Alloy, Heat-Resistant, Castings 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6) Solution Heat Treated and Precipitation Heat Treated203.0Likely current
AMS 4229Aluminum Alloy Castings, High Strength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and OveragedA201.0Current
AMS 4235Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T71) Solution and Precipitation Heat TreatedA206.0Current
AMS 4236Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated and Naturally AgedA206.0Current
AMS 4241Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated Dendrite Arm Spacing (DAS) ControlledD357.0Likely current
AMS 4242Aluminum Alloy, Castings 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and OveragedB201.0Likely current
AMS 4260Aluminum Alloy, Investment Castings 1.0Si - 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated356.0Likely current
AMS 4261Aluminum Alloy Castings, Investment 7.0Si - 0.32Mg (356.0-T51) Precipitation Heat Treated356.0Likely current
AMS 4280Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.5Mg (355.0-T71) Solution Heat Treated and Overaged355.0Likely current
AMS 4281Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated355.0Current
AMS 4284Aluminum Alloy Castings, Permanent Mold 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated356.0Likely current
AMS 4285Aluminum Alloy Castings, Centrifugal 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated356.0Likely current
AMS 4286Aluminum Alloy Castings, Permanent Mold 7.0Si - 0.32Mg (356.0-T51) As-Cast then Precipitation Heat Treated356.0Likely current
AMS 4288Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti (E357.0-T6) Solution and Precipitation Heat TreatedE357.0Likely current
AMS 4289Aluminum Alloy Castings 7.0Si - 0.55Mg - 0.12Ti (F357.0-T6) Solution and Precipitation Heat TreatedF357.0Likely current
AMS 4290Aluminum Alloy, Die Castings 9.5Si - 0.50Mg (360.0-F) As Cast360.0Likely current
AMS 4291Aluminum Alloy, Die Castings 8.5Si - 3.5Cu (A380.0-F) As CastA380.0Likely current
AMS 4406Aluminum Alloy Centrifugal Castings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (709.0-T61) Hot Isostatically Pressed Solution and Precipitation Heat Treated709.0Likely current
AMS-A-21180Aluminum-Alloy Castings, High StrengthCurrent
AMS-QQ-A-591Aluminum Alloy Die CastingsTo confirm
AMS-QQ-A-596Aluminum Alloy Castings, Permanent MoldTo confirm
AMS-QQ-A-601Aluminum Alloy Sand CastingsTo confirm
ASME SB-26Aluminum-Alloy Sand Castings356.0, A356.0Current
ASME SB-108Aluminum-Alloy Permanent Mold Castings356.0, A356.0Current
ASTM B26Aluminum-Alloy Sand Castings201.0, A201.0, 206.0, A206.0, 242.0, 295.0, 319.0, 355.0 …Current
ASTM B85Aluminum-Alloy Die Castings360.0, A360.0, 364.0, 380.0, A380.0, 383.0, 384.0, 390.0 …Current
ASTM B108Aluminum-Alloy Permanent Mold Castings201.0, 242.0, 296.0, 319.0, 333.0, 354.0, 355.0, C355.0 …Current
ASTM B179Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes356.0, A356.0, 319.0, 380.0, A380.0, 383.0, 413.0Current
ASTM B618Aluminum-Alloy Investment CastingsA201.0, 354.0, 355.0, C355.0, 356.0, A356.0, A357.0, A206.0Current
ASTM B686Aluminum Alloy Castings, High-StrengthA201.0, A206.0, 354.0, C355.0, A356.0, A357.0, D357.0, E357.0Current
EN 1706Aluminium and aluminium alloys - Castings - Chemical composition and mechanical propertiesTo confirm
JIS H5202Aluminium alloy castingsTo confirm
MIL-A-958Aluminum Base Alloy, Permanent Mold Castings (Marine Service)Cancelled 1956QQ-A-596
MIL-A-10935Aluminum Base Alloy-Permanent Mold CastingsCancelled 1951
MIL-A-10936Aluminum Base Alloy, Sand CastingsCancelled 1953
MIL-A-10937Aluminum Base Alloy, IngotsCancelled 1961
MIL-A-15153Aluminum Base Alloy Die CastingCancelled 1962QQ-A-591
MIL-A-17129Aluminum Alloy Casting; Sand, Resistant to Salt-WaterCancelled 1958QQ-A-601
MIL-A-21180Aluminum-Alloy Castings, High StrengthA201.0, A356.0, 355.0, C355.0, 354.0Cancelled 1999AMS-A-21180
MIL-A-21999Aluminum Alloy Investment CastingsCancelled 1960
MIL-C-47140Casting, Aluminum Alloy, Tens 50Cancelled 1979
MIL-C-47229Casting, Aluminum Alloy, High QualityCancelled 1979
MIL-I-6869Impregnants for Aluminum Alloy and Magnesium Alloy CastingsCancelled 1987MIL-I-17563
MIL-R-22628Resin, Casting, Epoxy, Aluminum FilledCancelled 1989
QQ-A-371Aluminum Alloy Ingot (for Remelting)Cancelled 1992ASTM B179
QQ-A-451Aluminum IngotsCancelled 1964
QQ-A-591Aluminum Alloy Die Castings360.0, 380.0, A380.0, 383.0, 413.0Cancelled 1992ASTM B85, ASTM B26, ASTM B108, SAE J452, SAE J453, AMS 4290, AMS 4291
QQ-A-596Aluminum Alloy Castings, Permanent Mold355.0, 356.0, A356.0, 319.0Cancelled 1992ASTM B108
QQ-A-601Aluminum Alloy Sand Castings319.0, 355.0, 356.0, A356.0, 535.0, A201.0Cancelled 1991 (still common)ASTM B26
Stainless, austenitic: 238 specs
SpecTitleAlloysStatusReplaced by
AMS 2243Tolerances Corrosion and Heat Resistant Steel TubingCurrent
AMS 2371Quality Assurance Sampling and Testing, Corrosion and Heat Resistant Steels and Alloys, Wrought Products and FCurrent
AMS 2376Qualification, Approval, and Control of Premium-Quality Forgings Alloy Steels and Heat-Treatable Corrosion and Heat Resistant Steels and AlloysLikely current
AMS 2807Identification Carbon and Low-Alloy Steels, Corrosion and Heat Resistant Steels and Alloys Sheet, Strip, PlateCurrent
AMS 5340Steel, Corrosion Resistant, Investment Castings 14Cr - 4.25Ni - 2.25Mo - 0.25Cb - 3.25Cu Homogenization and Solution Heat TreatedLikely current
AMS 5353Steel, Corrosion Resistant, Investment Castings 16CR - 1.8NI - 0.08N as CastCurrent
AMS 5361Steel Castings, Sand and Centrifugal, Corrosion and Heat-Resistant 18.5Cr - 13.5Ni - 2.1Mo Solution Heat TreatedLikely current
AMS 5362Steel, Corrosion and Heat Resistant, Investment Castings 19Cr - 12Ni - 1.0Cb (Nb) Solution Heat TreatedLikely current
AMS 5364Steel, Corrosion and Heat-Resistant, Investment Castings 19.5Cr - 10.5Ni - 0.65Cb (CF-8C) Solution Heat TreatedLikely current
AMS 5365Steel Castings, Sand, Corrosion and Heat Resistant 24.5Cr - 20.5Ni Solution Heat TreatedLikely current
AMS 5366Steel, Corrosion and Heat Resistant, Investment Castings 25CR - 20NI (CK20) as CastCurrent
AMS 5370Steel, Corrosion and Heat-Resistant, Investment Castings 19Cr - 9.5Ni (CF-3) Solution Heat TreatedLikely current
AMS 5398Steel, Corrosion-Resistant, Sand and Centrifugal Castings 16Cr - 4.1Ni - 0.22Cb (Nb) - 2.8Cu Solution Heat TreatedLikely current
AMS 5406Alloy Castings, Investment, Corrosion and Heat Resistant 3NI - 8.0CR - 10CO - 6.0MO - 1.0TI - 4.2TA - 60AL - 0Cancelled 2009
AMS 5501Steel, Corrosion Resistant, Sheet, Strip, and Foil 19Cr - 9.5Ni (304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength304Likely current
AMS 5507Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 13Ni - 2.5Mo (SAE 30316L) Solution Heat Treated316LCurrent
AMS 5510Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated321Current
AMS 5511Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.5Ni (304L) Solution Heat Treated304LCurrent
AMS 5512Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.80Cb (SAE 30347) Solution Heat Treated347Current
AMS 5513Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Solution Heat Treated304Current
AMS 5514Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 11.5Ni (305) Solution Heat Treated305Likely current
AMS 5515Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 8.5Ni (302) Solution Heat Treated, High Ductility302Likely current
AMS 5516Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (302) Solution Heat Treated302Current
AMS 5517Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 125 ksi Tensile Strength301Current
AMS 5518Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 150 ksi Tensile Strength301Current
AMS 5519Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 185 ksi Tensile Strength301Current
AMS 5521Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 25Cr - 20Ni (310S) Solution Heat Treated310SLikely current
AMS 5523Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 23Cr - 13.5Ni (309S) Solution Heat Treated309SLikely current
AMS 5524Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 18Cr - 13Ni - 2.5Mo (SAE 30316) Solution Heat Treated316Current
AMS 5552Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 46FE - 20.5CR - 32NI - 1.1TI AnealedCancelled 2012
AMS 5554Steel, Corrosion and Heat-Resistant, Seamless Tubing 16.5Cr - 4.5Ni - 2.9Mo - O.10N AnnealedCurrent
AMS 5556Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18Cr - 11Ni - 0.70Cb (SAE 30347) Solution Heat Treated347Current
AMS 5557Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated321Current
AMS 5558Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Thin Wall, Solution Heat Treated347Current
AMS 5559Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Thin Wall, Solution Heat Treated321Current
AMS 5560Steel, Corrosion-Resistant, Seamless Tubing 19Cr - 10Ni (SAE 30304) Solution Heat Treated304Current
AMS 5561Tubing, Steel, Welded and Drawn, Corrosion and Heat Resistant 9.0MN - 20CR -6.5NI - 0.28N High Pressure HydrauCurrent
AMS 5562Steel, Corrosion and Heat Resistant, Seamless Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N Solution Heat TreatedLikely current
AMS 5563Steel, Corrosion-Resistant, Seamless or Welded Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, 1/4 Hard Temper304Current
AMS 5564Steel, Corrosion-Resistant, Tubing 19Cr - 10Ni (SAE 30304) High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless, Cold Drawn, 1/8 Hard Temper304Current
AMS 5565Steel, Corrosion-Resistant, Welded Tubing 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated304Current
AMS 5566Steel, Corrosion-Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (SAE 30304) High Pressure, Cold Drawn304Current
AMS 5567Steel, Corrosion-Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (SAE 30304) Solution Heat Treated304Current
AMS 5569Steel, Corrosion and Heat-Resistant, Seamless and Welded Hydraulic Tubing 19Cr - 9.5Ni - 0.03C max Cold Drawn, 1/8 Hard Temper304Current
AMS 5570Steel, Corrosion and Heat-Resistant, Seamless Tubing 18Cr - 11Ni - 0.40Ti (SAE 30321) Solution Heat Treated321Current
AMS 5571Steel, Corrosion and Heat-Resistant, Seamless Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Solution Heat Treated347Current
AMS 5572Steel Corrosion and Heat-Resistant Seamless Tubing 25Cr - 20Ni (SAE 30310S) Solution Heat Treated310SLikely current
AMS 5573Steel, Corrosion and Heat-Resistant, Seamless Tubing 17Cr - 12Ni - 2.5Mo (SAE 30316) Solution Heat Treated316Likely current
AMS 5574Steel, Corrosion and Heat Resistant, Seamless Tubing 23Cr - 13.5Ni (309S) Solution Heat Treated309SLikely current
AMS 5575Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Solution Heat Treated347Current
AMS 5576Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated321Current
AMS 5577Steel, Corrosion and Heat Resistant, Welded Tubing 25Cr - 20Ni (SAE 30310) Solution Heat Treated310Likely current
AMS 5584Steel, Corrosion and Heat-Resistant, Seamless and Welded Hydraulic Tubing 17Cr - 12Ni - 1.5Mo - 0.03C max Cold Drawn, 1/8 Hard Temper316Current
AMS 5594Steel Plate, Corrosion and Moderate Heat Resistant 15.5Cr - 4.5Ni - 2.9Mo - 0.1N Equalized and OvertemperedCancelled 1995
AMS 5595Steel, Corrosion Resistant, Sheet, Strip, and Plate 9.0Mn - 20Cr - 6.5Ni - 0.28N Solution Heat TreatedLikely current
AMS 5635Steel Corrosion-Resistant Bars Wire and Forgings 18Cr - 9Ni - 0.21Pb (303Pb) Free-Machining Solution Heat TreatedLikely current
AMS 5636Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (302) Solution Heat Treated and Cold Drawn, 100 ksi Tensile Strength302Current
AMS 5637Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn, 125 ksi Tensile Strength302Current
AMS 5638Steel, Corrosion-Resistant, Bars and Forgings 0.14S - 18Cr - 9.5Ni - 0.50Mo - 0.80Al (303MA) Free-Machining; Swaging or Upsetting Solution Heat TreatedLikely current
AMS 5639Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 19Cr - 10Ni Solution Heat Treated304Current
AMS 5640Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9.0Ni Free Machining303Current
AMS 5641Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 18.5Cr - 10Ni - 0.22Se (303Se) Free-Machining; for Swaging or Upsetting Solution Heat TreatedLikely current
AMS 5645Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 10Ni - 0.40Ti (SAE 30321) Solution Heat Treated321Current
AMS 5646Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11Ni - 0.60Cb (SAE 30347) Solution Heat Treated347Current
AMS 5647Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 9.5Ni Solution Heat Treated304LCurrent
AMS 5648Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated316Likely current
AMS 5649Steel Corrosion and Heat-Resistant Bars Wire and Forgings 18Cr - 13Ni - 2.1Mo Free Machining Solution Heat TreatedLikely current
AMS 5650Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 23Cr - 13.5Ni (309S) Solution Heat Treated309SLikely current
AMS 5651Steel Corrosion and Heat-Resistant Bars Wire Forgings Tubing and Rings 25Cr - 20Ni (SAE 30310) Solution Heat Treated310Likely current
AMS 5652Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 25Cr - 20Ni - 2.0Si (SAE 30314) Solution Heat Treated314Likely current
AMS 5653Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 17Cr - 12Ni - 2.5Mo (0.030 max C) (316L) Solution Heat Treated316LCurrent
AMS 5656Steel, Corrosion Resistant, Bars, Wire, Forgings, Extrusions, and Rings 9.0Mn - 20Cr - 6.5Ni - 0.27N Solution Heat Treated21-6-9Likely current
AMS 5658Steel Bars, Forgings and Rings, Corrosion Resistant 15Cr - 4.5Ni - 0.30 (cb + Ta) - 3.5CuCancelled 1997
AMS 5674Steel, Corrosion and Heat-Resistant, Wire 18Cr - 11.5Ni - 0.70Cb (SAE 30347) Solution Heat Treated347Current
AMS 5680Steel, Corrosion and Heat-Resistant, Welding Wire 18.5Cr - 11Ni - 0.40Cb (SAE 30347)347Current
AMS 5688Steel, Corrosion-Resistant, Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper302Current
AMS 5689Steel, Corrosion- and Heat-Resistant, Wire 18Cr - 10.5Ni - 0.40Ti (321) Solution Heat Treated321Likely current
AMS 5690Steel, Corrosion and Heat Resistant, Wire 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated316Likely current
AMS 5693Steel Wire, Corrosion Resistant 18Cr-9.0Ni (SAE 30302) Cryogenically Produced, High Tensile Strength302Cancelled 1995
AMS 5697Steel, Corrosion-Resistant, Wire 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated304Current
AMS 5718Steel, Bars, Forgings, Tubing, and Rings, Corrosion Resistant 11.8Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 - 0.15C) AnCancelled 1995
AMS 5727Steel Forgings, Corrosion & Heat Resistant 16Cr-25Ni-6MoCancelled 1971
AMS 5735Steel Bar, Forgings, Tubing & Rings, Corrosion & Heat Resistant - 15Cr-26Ni-1.3Mo-2.1Ti-0.30V 1800 F (982.2c)Cancelled 1975
AMS 5736Steel Bars, Forgings, Tubing & Rings, Corrosion & Heat Resistant 15Cr-26Ni-1.3Mo-2.1Ti-0.30V 1800 F (982.2() SCancelled 1975AMS 5731
AMS 5738Steel, Corrosion Resistant, Bars and Wire 18Cr - 9Ni (303F) Free Machining, High Yield Strength Solution Heat Treated and Cold Worked303SeLikely current
AMS 5745Steel, Corrosion and Heat Resistant, Bars and Forgings 16.5CR - 4.5NI - 2.9MO - 0.10N Equalized and Over-TempeCurrent
AMS 5749Steel, Corrosion-Resistant, Bars, Wire, Forgings, Forging Stock and Mechanical Tubing 14.5Cr - 4.0Mo - 1.2V (1.10- 1.20C) Premium Quality for Bearing Applications, Double Vacuum MeltedLikely current
AMS 5764Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, and Rings 5.0Mn - 22Cr - 12.5Ni - 2.2Mo - 0.20Cb - 0.30N - 0.20V Solution Heat TreatedNitronic 50Likely current
AMS 5766Alloy, Corrosion and Heat-Resistant, Bars and Forgings 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe Solution Heat TreatedLikely current
AMS 5848Steel Corrosion-Resistant Bars Wire Forgings Extrusions Tubing and Rings Wear and Galling Resistant 8.0Mn 4.0Si 17Cr 8.5Ni 0.13N Solution Heat TreatedNitronic 60Likely current
AMS 5857Steel, Corrosion Resistant, Bars and Wire 19Cr - 10Ni (304) High Yield Strength Solution Heat Treated and Cold Worked304Likely current
AMS 5861Sheet Steel, Strip, and Plate, Corrosion Resistant 22Cr - 13Ni - 5.0Mn 2.25MoCancelled 1995
AMS 5866Steel, Corrosion Resistant, Flat Wire 18CR - 9.0NI (SAE 30302) Spring Temper302Current
AMS 5868Steel, Corrosion-Resistant, Seamless and Welded Aircraft Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, 1/2 Hard Temper304Likely current
AMS 5874Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05Zr - 0.05La - 0.20N Solution Heat TreatedLikely current
AMS 5877Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05La - 0.20N Solution Heat TreatedLikely current
AMS 5896Steel, Corrosion- and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.55Ti (321) Solution Heat Treated and Cold Drawn, 1/8 Hard Temper321Likely current
AMS 5897Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 11Ni - 0.80Cb (Nb) (SAE 30347) Solution Heat Treated and Cold Drawn, 1/8 Hard Temper347Likely current
AMS 5900Steel Bars, Forgings, and Mechanical Tubing, Corrosion Resistant 14Cr - 2.1Mo - 0.30Cb (Nb) - 1.0V (1.05 - 1.15C) Premium Aircraft Quality for Bearing Applications, Double Vacuum MeltedLikely current
AMS 5901Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 8Ni (SAE 30301) Solution Heat Treated301Current
AMS 5902Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 3/4 Hard, 175 ksi Tensile Strength301Current
AMS 5903Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/4 Hard, 125 ksi Tensile Strength302Current
AMS 5904Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/2 Hard, 150 ksi Tensile Strength302Current
AMS 5905Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 3/4 Hard, 175 ksi Tensile Strength302Current
AMS 5906Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi Tensile Strength302Current
AMS 5907Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 12Ni - 2.5Mo (SAE 30316) Cold Rolled, 1/4 Hard, 125 ksi Tensile Strength316Current
AMS 5910Steel Sheet, Strip, and Plate, Corrosion-Resistant 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 125 ksi Tensile Strength304Current
AMS 5911Steel Sheet and Strip, Corrosion-Resistant 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 150 ksi Tensile Strength304Current
AMS 5912Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 3/4 Hard, 175 ksi Tensile Strength304Current
AMS 5913Steel Sheet and Strip, Corrosion-Resistant 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 185 ksi Tensile Strength304Current
AMS 5925Steel, Corrosion-Resistant, Bars, Wire, and Forgings 15.5Cr - 1.8Mo - 0.20N (0.37 - 0.45C) Electroslag RemeltedLikely current
AMS 5926Steel, Corrosion-Resistant, Bars, Wire, Tubing, and Forgings 15.5Cr - 1.5Si - 0.3Mo - 0.1N (0.45 - 0.60C) for Bearing ApplicationsLikely current
AMS 5931Steel, Bars, Wire, Forgings, Extrusions, Tubing, and Rings Wear, Galling, and Corrosion-Resistant 5.0Mn - 3.5Si - 16.5Cr - 5.0Ni - 0.14N Solution Heat TreatedLikely current
AMS 5932Steel, Corrosion- and Heat-Resistant, Bars, Forgings, and Mechanical Tubing 14.5Cr - 2.3Ni - 12.5Co - 4.0Mo - 0.60V - 0.03Cb(Nb) Carburizing, Premium Aircraft-Quality, Double Vacuum MeltedLikely current
AMS 6302Steel, Low-Alloy, Heat-Resistant, Bars, Forgings, and Tubing 0.65SI - 1.25CR - 0.50MO - 0.25V (0.28 - 0.33C)Current
AMS 6303Steel Bars and Forgings, Low Alloy, Heat Resistant 0.65SI - 1.25CR - 0.50MO - 0.85V (0.25 - 0.30C)Current
AMS 6305Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum Arc RemeltedCurrent
AMS 6385Steel Sheet, Strip, and Plate, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.27 - 0.33C)Current
AMS 6436Steel Sheet, Strip, and Plate, Low-Alloy, Heat Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.85V (0.25 - 0.30C) AnneaCancelled 2001
AMS-QQ-S-763Steel Bars, Wire, Shapes, and Forgings; Corrosion Resistant302, 303, 304, 304L, 316, 316L, 321, 347 …Current
AMS-S-7720Steel, Corrosion-Resistant (18-8) Bars, Wire and Forging Stock (Aircraft Quality)302, 304Current
AMS-T-6845Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition304Current
AMS-T-8506Tubing, Steel, Corrosion-Resistant, (304), Annealed, Seamless and Welded304Cancelled 2012AMS 5565
ASME SA-182ASME Section II Part A SA-182 (twin of ASTM A182)304, 304L, 316, 316L, 321, 347, A182 F11, A182 F22 …Current
ASME SA-213ASME Section II Part A SA-213 (twin of ASTM A213)304, 316, 321, 347, A213 T11, A213 T22, A213 T5, A213 T9Current
ASME SA-240ASME Section II Part A SA-240 (twin of ASTM A240)201, 202, 301, 304, 304L, 316, 316L, 321 …Current
ASME SA-249ASME Section II Part A SA-249 (twin of ASTM A249)304, 316, 321, 347Current
ASME SA-269ASME Section II Part A SA-269 (twin of ASTM A269)304, 316Current
ASME SA-312ASME Section II Part A SA-312 (twin of ASTM A312)304, 304L, 316, 316L, 321, 347Current
ASME SA-351ASME Section II Part A SA-351 (twin of ASTM A351)CF8, CF8MCurrent
ASME SA-358ASME Section II Part A SA-358 (twin of ASTM A358)304, 316Current
ASME SA-376ASME Section II Part A SA-376 (twin of ASTM A376)304H, 316H, 321H, 347HCurrent
ASME SA-403ASME Section II Part A SA-403 (twin of ASTM A403)304, 316Current
ASME SA-479ASME Section II Part A SA-479 (twin of ASTM A479)304, 304L, 316, 316L, 321, 347, 410, 430 …Current
ASME SA-480General requirements for flat-rolled stainless steel (twin of ASTM A480)304, 304L, 316, 316LCurrent
ASME SA-484ASME Section II Part A SA-484 (twin of ASTM A484)304, 316Current
ASME SA-582ASME Section II Part A SA-582 (twin of ASTM A582)303, 303SeCurrent
ASME SA-666ASME Section II Part A SA-666 (twin of ASTM A666)201, 301, 304, 304L, 316, 316LCurrent
ASME SA-688ASME Section II Part A SA-688 (twin of ASTM A688)304, 316Current
ASTM A167Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip301, 302, 304, 304L, 309, 310, 316, 316L …Withdrawn 2014 (still common)ASTM A240
ASTM A177Stainless Chromium-Nickel Steel Plate, Sheet, and Strip for Fusion-Welded Unfired Pressure Vessels301To confirm
ASTM A182Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service304, 304L, 304H, 316, 316L, 316H, 321, 321H …Current
ASTM A193Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications304, 316, 321, 347, 4140, 4142Current
ASTM A213Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes304, 304L, 304H, 316, 316L, 316H, 321, 321H …Current
ASTM A240Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications201, 202, 301, 304, 304L, 304H, 304N, 305 …Current
ASTM A249Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes304, 304L, 316, 316L, 321, 347Current
ASTM A269Seamless and Welded Austenitic Stainless Steel Tubing for General Service304, 304L, 316, 316L, 321, 347Current
ASTM A276Stainless Steel Bars and Shapes201, 202, 302, 303, 303Se, 304, 304L, 304H …Current
ASTM A312Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes304, 304L, 304H, 316, 316L, 316H, 321, 321H …Current
ASTM A313Stainless Steel Spring Wire301, 302, 304, 305, 316, 17-7PHCurrent
ASTM A314Stainless Steel Billets and Bars for Forging302, 304, 304L, 309, 310, 316, 316L, 321 …Current
ASTM A351Castings, Austenitic, for Pressure-Containing PartsCF8, CF3, CF8M, CF3M, CF8CCurrent
ASTM A358Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications304, 304L, 316, 316L, 321, 347Current
ASTM A368Stainless Steel Wire Strand302, 304Current
ASTM A376Seamless Austenitic Steel Pipe for High-Temperature Service304H, 316H, 321H, 347HCurrent
ASTM A403Wrought Austenitic Stainless Steel Piping Fittings304, 304L, 316, 316L, 321, 347Current
ASTM A412Stainless and Heat-Resisting Chromium-Nickel-Manganese Steel Plate, Sheet, and Strip201, 202To confirm
ASTM A473Stainless Steel Forgings302, 304, 304L, 316, 316L, 321, 347, 410 …Current
ASTM A478Chromium-Nickel Stainless Steel Weaving and Knitting Wire302, 304, 316Current
ASTM A479Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels302, 304, 304L, 304H, 304N, 309S, 310S, 316 …Current
ASTM A480General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip201, 202, 301, 302, 304, 304L, 304H, 316 …Current
ASTM A484General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings303, 304, 304L, 316, 316L, 321, 347, 410 …Current
ASTM A492Stainless Steel Rope Wire302, 304, 316Current
ASTM A493Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging302, 304, 305, 316, 384, 410, 430, 416Current
ASTM A511Seamless Stainless Steel Mechanical Tubing and Hollow Bar304, 304L, 316, 316L, 321, 347, 410, 430Current
ASTM A554Welded Stainless Steel Mechanical Tubing304, 304L, 316, 316L, 430, 439Current
ASTM A555General Requirements for Stainless Steel Wire and Wire Rods302, 304, 316Current
ASTM A580Stainless Steel Wire302, 303, 304, 304L, 305, 308, 309, 310 …Current
ASTM A632Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service304, 304L, 316, 316L, 321, 347Current
ASTM A666Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar201, 301, 304, 304L, 316, 316LCurrent
ASTM A688Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes304, 304L, 316, 316LCurrent
ASTM A743Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General ApplicationCF8, CF8M, CF3, CF3M, CA15, CA6NM, CB7Cu-1, CB7Cu-2 …Current
ASTM A744Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe ServiceCF8, CF8M, CF3, CF3MCurrent
ASTM A774As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures304, 304L, 316, 316LCurrent
ASTM A778Welded, Unannealed Austenitic Stainless Steel Tubular Products304, 304L, 316, 316LCurrent
ASTM A813Single- or Double-Welded Austenitic Stainless Steel Pipe304, 304L, 316, 316L, 321, 347Current
ASTM A814Cold-Worked Welded Austenitic Stainless Steel Pipe304, 304L, 316, 316LWithdrawn 2024
ASTM A961Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications304, 316, Carbon and alloy piping forgingsCurrent
ASTM A965Steel Forgings, Austenitic, for Pressure and High Temperature Parts304, 304L, 316, 316L, 321, 347Current
ASTM A999General Requirements for Alloy and Stainless Steel Pipe304, 316Current
ASTM A1016General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes304, 316, 321, 347Current
ASTM F138Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)316LVMCurrent
ASTM F139Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)316LVMCurrent
DOD-F-24669/6Forgings and Forging Stock, Steel Bars and Billets, Corrosion Resisting; for Reforging (metric)Current
DOD-F-24669/7Forgings and Forging Stock, Steel Bars and Billets, Corrosion Resisting; Naval Steam Turbine Parts Use (metricCurrent
EN 10088-2Stainless steels: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes304, 304L, 316, 316L, 321, 430, 409, 410 …Current
EN 10216-2Seamless Steel Tubes for Pressure Purposes, Part 2: Non-Alloy and Alloy Steel Tubes with Specified Elevated Temperature PropertiesA213 T11, A213 T22Current
EN 10216-5Seamless steel tubes for pressure purposes: Stainless steel tubes304, 316, 2205Current
EN 10217-7Welded steel tubes for pressure purposes: Stainless steel tubes304, 316, 2205Current
JIS G3459Stainless steel pipes304, 316Current
JIS G4304Hot-rolled stainless steel plate, sheet and strip304, 316, 410, 430, 17-4PHCurrent
JIS G4305Cold-rolled stainless steel plate, sheet and strip304, 316, 410, 430, 17-4PHCurrent
MIL-A-46158Aluminum Alloy Strip, Stainless Steel CladCancelled 1997
MIL-C-24111Chromium-Nickel Alloy Steel Bars, rods and Forgings, Corrosion ResistantCancelled 1997
MIL-DTL-23193Steel, Corrosion Resistant, Castings (UNS J92600, J92710, J92900, and J92999)Current
MIL-DTL-23195Steel Bars and Forgings, Corrosion Resistant (UNS S30400/S30403, S31600/S31603, S34700, and S34800)304, 304L, 316, 316L, 347, 348Current
MIL-DTL-23196Steel Plate, Corrosion Resistant (UNS S30400/S30403, S31600/S31603, S31703, S34700, and S34800)304, 304L, 316, 316L, 317L, 347, 348Current
MIL-DTL-23226Tube and Pipe, Corrosion Resistant Steel, Seamless (UNS S30400, S30403, S30400/S30403, S31600/S31603, S31703,304, 304L, 316, 316L, 317LCurrent
MIL-F-20138Floor Plate, Corrosion Resistant Steel, RolledCancelled 1987
MIL-S-853Steel, Corrosion-Resisting: Bars and Forgings (except for Reforging)Cancelled 1954QQ-S-763
MIL-S-862Steel Bars, Billets, Forgings, Corrosion-Resisting (precursor of QQ-S-763)302, 304, 316, 321, 347Cancelled 1986
MIL-S-867Steel Castings, Corrosion Resisting, AusteniticCancelled 1989MIL-C-24707/3
MIL-S-867A(I1)Steel Castings, Corrosion Resisting, AusteniticCancelled 1989MIL-C-24707/3
MIL-S-4043Steel; Corrosion-Resisting (extra Low Carbon Type 304), Plate, Sheet, and Strip304Cancelled 2002AMS 5511
MIL-S-5059Steel, Corrosion-Resistant (18-8), Plate, Sheet and Strip301, 302, 304, 316Cancelled 1993 (still common)AMS 5513, AMS 5910, AMS 5911, AMS 5912, AMS 5913, AMS 5524, AMS 5516, AMS 5517, AMS 5518, AMS 5519, AMS 5901, AMS 5902, AMS 5903, AMS 5904, AMS 5905, AMS 5906, AMS 5907
MIL-S-6721Steel, Corrosion-Resisting (Stabilized 321/347), Plate, Sheet and Strip321, 347Cancelled 1982AMS 5512, AMS 5510
MIL-S-7720Steel, Corrosion-Resistant (18-8) Bars, Wire and Forging Stock (Aircraft Quality)302, 303, 303Se, 304Cancelled 1997AMS-S-7720
MIL-S-13336Steel Bars, Heat Resistant (27% Chromium)Cancelled 1954
MIL-S-17996Steel Sheet and Other Wrought Forms, Corrosion Resisting, Austenitic (low Magnetic Permeability), Chromium-ManCancelled 1986
MIL-S-18170Steel Bars and Forgings, Corrosion Resisting, Radioactive System ServiceCancelled 1957
MIL-S-18171Steel, Plate, Sheet, and Strip, Corrosion Resisting, Radioactive System ServiceCancelled 1954
MIL-S-20150Steel, Corrosion-Resisting, Castings (for Boiler Feed Pump Castings)Cancelled 1951
MIL-S-22216Steel, Alloy, Corrosion Resistant, Investment CastingCancelled 1959MIL-S-81591
MIL-S-27419Steel Billets, Corrosion Resistant, Annealed, Premium QualityCancelled 1995
MIL-S-46042Steel, Corrosion and Heat Resistant Bar and ForgingsCancelled 1977
MIL-S-46044Steel, Expanded Sheet, Corrosion-ResistingCancelled 1966
MIL-S-46123Steel Bar, Hollow Bar, Wire and Forgings Corrosion and Heat ResistantCancelled 1981
MIL-T-5695Tubing, Steel, Corrosion-Resistant (304), Cold Drawn (For Replacement Information see Notice 5)304Cancelled 2014
MIL-T-6733Tubing, Chrome Nickel Molybdenum (8735) Steel StainlessCancelled 1980MIL-T-6735
MIL-T-6737Tubing, Steel, Corrosion-Resistant (321/347), Welded321, 347Cancelled 1997AMS 5575, AMS 5576
MIL-T-6845Tubing, Steel, Corrosion-Resistant (304), Aerospace Vehicle Hydraulic Systems, 1/8 Hard304Cancelled 1999 (still common)AMS-T-6845
MIL-T-6846Tubing; Steel, Corrosion Resisting (18-8) Aircraft, Hydraulic System, Annealed302, 304Cancelled 1952MIL-T-8504
MIL-T-7880Tubing, Flexible, Corrosion-Resistant and Heat-Resistant SteelCancelled 1957WW-H-1053
MIL-T-8504Tubing, Steel, Corrosion-Resistant (304), Seamless304Inactive for new design 2018AMS 5567
MIL-T-8506Tubing, Steel, Corrosion-Resistant (304), Welded304Cancelled 1999AMS-T-8506
MIL-T-8606Tubing, Steel, Corrosion-Resistant (321/347), Welded321, 347Inactive for new design 2020AMS 5560, AMS 5563, AMS 5564, AMS 5565, AMS 5566, AMS 5567, AMS 5569, AMS 5570, AMS 5571, AMS 5639, AMS 5668
MIL-T-8808Tubing, Steel, Corrosion-Resistant (321, 347), Seamless and Welded321, 347Inactive for new design 2020AMS 5556, AMS 5557
MIL-T-8887Tubing, Steel, Corrosion-Resistant, Heat-Resistant, Stabilized, Welded, Thin Wall (ASG)Cancelled 1987
MIL-T-18063Tube and Pipe, Corrosion-Resisting Steel, Seamless and Welded, Nuclear Plant ServiceCancelled 1961
MIL-T-52010Tube, Corrosion Resisting Steel, Mechanical Seamless and Welded (use ASTM A511-64 and ASTM A554-65Cancelled 1991
MIL-W-5693Wire Strand, Steel (corrosion Resistant) Preformed (aircraft Applications)Cancelled 1991MIL-W-87161
MIL-W-6713Wire: Corrosion-Resisting (grade G) SteelCancelled 1953QQ-W-423
MIL-W-17481Wire, Steel, Corrosion-ResistingCancelled 1962QQ-W-423
MIL-W-52263Wire, Steel, Corrosion Resisting, Free Maching StockCancelled 1975ASTM A555, ASTM A581
QQ-S-682Steel, Corrosion-Resisting-Clad Plates, Sheets, and StripCancelled 1974
QQ-S-763Steel Bars, Wire, Shapes, and Forgings, Corrosion-Resisting302, 303, 304, 304L, 316, 316L, 321, 347 …Cancelled 1998 (still common)AMS-QQ-S-763
QQ-S-766Steel, Stainless and Heat Resisting, Alloys, Plate, Sheet and Strip201, 202, 301, 302, 304, 304L, 316, 316L …Cancelled 1993 (still common)ASTM A240, ASTM A666, ASTM A693
QQ-W-423Wire, Steel, Corrosion Resisting302, 304, 316, 321, 347Cancelled 1985ASTM A313, ASTM A580
Stainless, ferritic: 9 specs
SpecTitleAlloysStatusReplaced by
AMS 5352Steel, Corrosion Resistant, Investment Castings 17CR - 0.55MO (0.95 - 1.20C) AnnealedCurrent
AMS 5360Steel, Corrosion and Heat-Resistant, Investment Castings 17Cr - 13Ni - 1.9Mo Solution Heat TreatedLikely current
AMS 5503Steel, Corrosion-Resistant, Sheet, Strip, and Plate 17Cr (SAE 51430) Annealed430Current
AMS 5627Steel Corrosion and Heat-Resistant Bars Wire Forgins Tubing and Rings 17Cr (SAE 51430) Annealed430Likely current
AMS 5762Steel, Corrosion Resistant, Bars, Wire, and Forgings 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S Free Machining, Solution Heat TreatedLikely current
ASME SA-268Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service410, 430, 439, 446Current
ASTM A176Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip405, 410, 430, 442, 446Withdrawn 2015ASTM A240
ASTM A268Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service405, 409, 410, 429, 430, 439, 443, 446 …Current
ASTM A803Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes439, 26-3-3 (S44660)Current
Stainless, martensitic: 47 specs
SpecTitleAlloysStatusReplaced by
AMS 5349Steel Castings, Investment, Corrosion Resistant 13CR Free Machining, Hardened and TemperedCurrent
AMS 5350Steel, Corrosion and Moderate Heat Resistant, Investment Castings 12.5Cr (SAE 51410) Hardened and Tempered410Current
AMS 5351Steel Castings, Sand, Corrosion and Moderate Heat Resistant 13CR Normalized and TemperedCurrent
AMS 5354Steel, Corrosion and Heat Resistant, Investment Castings 13CR - 2.0NI - 3.0W, Hardened and TemperedCurrent
AMS 5504Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 12.5Cr (SAE 51410) Annealed410Current
AMS 5505Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 12Cr (SAE 51410 Modified) Ferrite Controlled, Annealed410Current
AMS 5506Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 13Cr (0.30 - 0.40C) (SAE 51420) Annealed420Current
AMS 5508Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 13Cr - 2.0Ni - 3.0W AnnealedGreek AscoloyCurrent
AMS 5591Steel, Corrosion and Heat-Resistant, Seamless Tubing 12.5Cr (SAE 51410) Annealed410Current
AMS 5609Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr - 0.12Cb (SAE 51410 Modified) Ferrite Controlled, Annealed410Current
AMS 5610Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 12.5Cr - Low Carbon (SAE 51416, 51416Se) Free-Machining416, 416SeCurrent
AMS 5611Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Forging and Ring Stock, Mechanical Tubing, and Rings 12Cr Ferrite Controlled, Annealed, Consumable Electrode Melted410Likely current
AMS 5612Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled, Annealed410Current
AMS 5613Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 12.5Cr (SAE 51410) Annealed410Current
AMS 5614Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 12Cr - 0.50Mo Annealed410 + 0.5MoCurrent
AMS 5616Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 13Cr - 2.0Ni - 3.0W AnnealedGreek AscoloyCurrent
AMS 5618Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) Consumable Electrode Vacuum Melted440CCurrent
AMS 5620Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 13Cr (0.30 - 0.40C) (420F, 420FSe) Free-Machining Grade420F, 420FSeCurrent
AMS 5621Steel, Corrosion Resistant, Bars, Wire, and Forgings, 13Cr (0.30-0.40C) (51420), Annealed420Likely current
AMS 5628Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Tubing 16Cr - 2.5Ni (SAE 51431)431Likely current
AMS 5630Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (440C)440CCurrent
AMS 5631Steel Corrosion-Resistant Bars and Forgings 17Cr (0.60 - 0.75C) (SAE 51440A)440ALikely current
AMS 5632Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.50Mo (0.95 - 1.20C) (SAE 51440F) Free-Machining, Annealed440FCurrent
AMS 5655Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V (0.20 - 0.25C) Hardened and Tempered422Cancelled 2023
AMS 5719Steel Bars, Wire, Forgings, Tubing, Rings, and Extrusions, Corrosion-Resistant 11.8Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 - 0.15C) Annealed, Vacuum Arc or Electroslag RemeltedJethete M152Cancelled 2023
AMS 5733Bars Steel and Forgings, Corrosion and Heat Resistant 13.5Cr - 26Ni - 3Mo - 1.8TiCancelled 1995
AMS 5867Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed410Likely current
AMS 5880Steel, Corrosion-Resistant, Bars, Forgings, and Wire 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) for Bearing Applications440CSuperseded 2012AMS 5618
AMS 5923Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (440C) for Bearing Applications440CLikely current
AMS 6474Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture ToughnessLikely current
AMS 7493Rings, Flash Welded Ferritic and Martensitic Corrosion-Resistant SteelsLikely current
AMS-S-18732Steel Bars, Wire, Forging Stock, Forgings, Tubing (431), Special Quality431Cancelled 2000
ASME SA-276ASME Section II Part A SA-276 (twin of ASTM A276)304, 316, 321, 347, 410, 416, 420, 431 …Current
ASTM A217Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature ServiceCA15, CA6NM, WC1, WC4, WC5, WC6, WC9, C5 …Current
ASTM A487Steel Castings Suitable for Pressure ServiceCA6NM, A487 Class 1N, A487 Class 2N, A487 Class 4N, A487 Class 1Q, A487 Class 2Q, A487 Class 4Q, A487 Class 8N …Current
ASTM A582Free-Machining Stainless Steel Bars303, 303Se, 416, 416Se, 420F, 430F, 430FSe, 440F …Current
EN 10088-3Stainless steels: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products304, 316, 410, 420, 431, 17-4PH, 2205Current
JIS G4303Stainless steel bars304, 316, 303, 410, 416, 420, 440C, 17-4PHCurrent
MIL-C-24637Castings, Steel, Martensitic, Corrosion-ResistantCurrent
MIL-DTL-24538Steel Bars and Forgings: High Carbon, Martensitic, Corrosion Resisting (UNS S44002 and UNS S44004)440A, 440CCurrent
MIL-S-861Steel Bars, Corrosion-Resisting (Naval Steam Turbine Parts)422Cancelled 1986DOD-F-24669/7
MIL-S-8955Title not confirmed (unknown (per brief))Cancelled 1987AMS 5520
MIL-S-18732Steel Bars, Wire, Forging Stock, Forgings, Tubing (431), Special Quality431Inactive for new design 2023AMS-S-18732
MIL-S-46059Title not confirmed (unknown (per brief))Cancelled 1987
MIL-S-81506Title not confirmed (17-4PH castings (per brief))Cancelled 1982AMS 5604
MIL-S-81591Title not confirmed (PH steel (per brief))Inactive for new design 2023
QQ-S-764Steel, Corrosion-Resisting, Free-Machining (title to verify)303, 303Se, 416, 416Se, 420F, 430F, 440FCancelled 1975 (still common)ASTM A484, ASTM A582
Stainless, precipitation hardening: 62 specs
SpecTitleAlloysStatusReplaced by
AMS 5342Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu (17-4) Homogenization, Solution, and Precipitation Heat Treated (H1100), 130 ksi Tensile Strength17-4PHCurrent
AMS 5343Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu (17-4) Homogenization, Solution, and Precipitation Heat Treated (H1000), 150 ksi Tensile Strength17-4PHCurrent
AMS 5344Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization, Solution and Precipitation Heat Treated (H900), 180 ksi Tensile Strength17-4PHCurrent
AMS 5346Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H925) 180 ksi (1241 MPa) Tensile Strength (15-5)CB7Cu-2, 15-5PHLikely current
AMS 5347Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (15-5)CB7Cu-2, 15-5PHLikely current
AMS 5355Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated, or Homogenization, Solution, and Precipitation Heat Treated17-4PHCurrent
AMS 5356Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile StrengthCB7Cu-2Likely current
AMS 5357Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated, Precipitation HardenableCB7Cu-2Likely current
AMS 5400Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H935), 170 ksi Tensile Strength15-5PHCurrent
AMS 5412Steel Castings, Vacuum Melted, Vacuum Cast, Investment, Corrosion-Resistant 13Cr - 8.0Ni - 2.2Mo - 1.1Al (195 ksi (1344 MPa) Tensile Strength (Condition H1000) Homogenized, Solution, and Precipitation Heat TreatedLikely current
AMS 5520Steel, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 15Cr - 7.1Ni - 2.5Mo - 1.1Al Solution Heat Treated, Precipitation HardenablePH15-7MoCurrent
AMS 5525Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F Solution Heat TreatedA-286Current
AMS 5528Steel, Corrosion-Resistant, Sheet, Strip, and Plate 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation Hardenable17-7PHCurrent
AMS 5529Steel, Corrosion-Resistant, Sheet and Strip 17Cr - 7.1Ni - 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable, 0.0015 to 0.050 in Nominal Thickness17-7PHCurrent
AMS 5568Steel, Corrosion and Heat-Resistant, Welded Tubing 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation Hardenable17-7PHCurrent
AMS 5578Steel, Corrosion and Heat-Resistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu, Vacuum Induction plus Consumable Electrode Vacuum Melted, Solution Heat Treated, Precipitation HardenableCustom 455Current
AMS 5603Steel Sheet and Strip, Corrosion and Moderate Heat Resistant, 15Cr - 8.4Ni - 2.2Mo - 1.1Al, Vacuum Induction Melted, Solution Heat TreatedPH14-8MoCancelled 1995
AMS 5604Steel, Corrosion-Resistant, Sheet, Strip, and Plate 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution Heat Treated, Precipitation Hardenable17-4PHCurrent
AMS 5617Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 8.5Ni - 1.2Ti - 2.0Cu, Vacuum Induction plus Vacuum Consumable Electrode Melted, Solution Heat Treated, Precipitation HardenableCustom 455Current
AMS 5622Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable Consumable Electrode Remelted17-4PHLikely current
AMS 5629Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuum Induction plus Consumable Electrode Melted, Solution Heat Treated, Precipitation HardenablePH13-8MoCurrent
AMS 5642Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 10.5Ni - 0.60Cb Free-Machining, Solution Heat Treated17-4PHCurrent
AMS 5643Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable17-4PHCurrent
AMS 5644Bars and Forgings, Steel, Corrosion-Resistant 17Cr - 7Ni - 1Al17-7PHCancelled 1995
AMS 5657Steel, Corrosion and Heat-Resistant 15Cr - 7.1Ni - 2.5Mo - 1.1AlPH15-7MoCancelled 1995
AMS 5659Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb - 3.5Cu15-5PHCurrent
AMS 5672Steel Wire, Corrosion Resistant 11.8Cr - 8.5Ni - 0.30(CB & Ta) - 1.1Ti - 2.0Cu Precipitation Hardenable, SprinCancelled 2005
AMS 5673Wire, Steel, Corrosion-Resistant 17Cr - 7.1Ni - 1.1Al, Precipitation Hardenable, Spring Temper17-7PHCancelled 1995
AMS 5678Steel, Corrosion-Resistant, Wire 17Cr - 7.1Ni - 1.1Al Cold Drawn, Precipitation Hardenable17-7PHCurrent
AMS 5700Steel, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Forging Stock 13.5Cr - 13.5Ni - 0.35Mo - 2.2W Annealed 2022 AMS 0 830 AMS5712L Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum Melted, Solution Heat Treated Precipitation HardenableLikely current
AMS 5726Steel, Corrosion- and Heat-Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) Solution Heat Treated and Work-Strengthened Consumable Electrode Remelted 200 ksi (1379 MPa) Tensile Strength CapabilityA-286Likely current
AMS 5731Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V, Consumable Electrode Melted, 1800 °F Solution Heat TreatedA-286Current
AMS 5732Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V, Consumable Electrode Melted, 1800 °F Solution and Precipitation Heat TreatedA-286Current
AMS 5734Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V, Consumable Electrode Melted, 1650 °F Solution Heat TreatedA-286Current
AMS 5737Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V, Consumable Electrode Melted, 1650 °F Solution and Precipitation Heat TreatedA-286Current
AMS 5763Steel, Corrosion-Resistant, Bars, Forgings, Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.50(Cb+Ta) - 1.5Cu Solution Heat TreatedCustom 450Current
AMS 5773Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.30 Cb (Nb) - 1.5Cu Consumable Electrode Remelted, Solution Heat Treated Precipitation HardenableCustom 450Likely current
AMS 5824Steel, Corrosion-Resistant, Welding Wire 17Cr - 7.1Ni - 1.0Al17-7PHLikely current
AMS 5826Steel, Corrosion and Heat-Resistant, Welding Wire 15Cr - 5.1Ni - 0.30Cb - 3.2Cu15-5PHCurrent
AMS 5853Steel Corrosion and Heat-Resistant Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1800 آ°F (982 آ°C) Solution Treated and Work-Strengthened 160 ksi (1103 MPa) Tensile StrengthA-286Likely current
AMS 5858Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Multiple Melted, 1800 ??F (982 ??C) Solution Heat Treated, Welding Grade Precipitation HardenableA-286Likely current
AMS 5860Steel, Corrosion-Resistant, Sheet, Strip, and Plate 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu, Multiple Melted, Solution Heat Treated, Precipitation HardenableCustom 455Current
AMS 5862Steel, Corrosion-Resistant, Sheet, Strip, and Plate 15Cr - 4.5Ni - 0.30Cb - 3.5Cu, Consumable Electrode Remelted, Solution Heat Treated, Precipitation Hardenable15-5PHCurrent
AMS 5863Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr - 6.5Ni - 0.75Mo - 0.60Cb - 1.5Cu Solution Heat Treated, Precipitation HardenableLikely current
AMS 5864Steel, Corrosion-Resistant, Plate 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuum Induction plus Consumable Electrode Melted, Solution Heat Treated, Precipitation HardenablePH13-8MoCurrent
AMS 5895Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1750 ??F (954 ??C) Solution Heat Treated, Welding Grade Precipitation HardenA-286Likely current
AMS 5934Steel, Extra High Toughness, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation-HardenablePH13-8MoLikely current
AMS 5936Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 11Ni - 1.7Ti - 1Mo Vacuum Induction Plus Vacuum Consumable Electrode Remelted Solution Heat Treated, Precipitation HardenableCustom 465Likely current
AMS 7490Rings, Flash Welded Corrosion and Heat-Resistant Austenitic Steels, Austenitic-Type Iron, Nickel or Cobalt Alloys, or Precipitation-Hardenable AlloysLikely current
ASME SA-564Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes17-4PH, 15-5PHCurrent
ASTM A296Castings, Iron-Chromium and Iron-Chromium-Nickel, Corrosion Resistant, for General ApplicationCA15, CB7Cu-1WithdrawnASTM A743
ASTM A453High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless SteelsA-286Current
ASTM A564Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes17-4PH, 15-5PH, PH13-8Mo, Custom 450, Custom 455, 17-7PH, PH15-7MoCurrent
ASTM A638Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature ServiceA-286Current
ASTM A693Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip17-4PH, 15-5PH, 17-7PH, PH15-7Mo, AM350, AM355, PH13-8Mo, Custom 450 …Current
ASTM A705Age-Hardening Stainless Steel Forgings17-4PH, 15-5PH, 17-7PH, PH13-8Mo, Custom 450, Custom 455Current
ASTM A747Steel Castings, Stainless, Precipitation HardeningCB7Cu-1, CB7Cu-2Current
MIL-DTL-24527Chromium-Nickel Alloy Steel Bars and Forgings, Corrosion-Resistant, Precipitation Hardening (UNS S17400)17-4PHCurrent
MIL-DTL-24550Steel Bars and Forgings, Austenitic, Corrosion Resistant, Precipitation Hardening (UNS S66286)A-286Current
MIL-S-25043Steel, Corrosion-Resistant (17-7PH), Plate, Sheet and Strip17-7PHCancelled 1997AMS 5528, AMS 5529
MIL-S-83311Steel, Custom 455 (title not confirmed)Custom 455Cancelled 2005AMS 5617
MIL-W-8958Wire, Steel, Corrosion-Resistant, High Strength (am 355)Cancelled 1994
Stainless, duplex: 5 specs
SpecTitleAlloysStatusReplaced by
ASTM A789Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service2205, 2507, 2304Current
ASTM A790Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe2205, 2507, 2304Current
ASTM A890Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General ApplicationCD3MN, CD4MCuN, CE3MN, CD3MWCuNCurrent
ASTM A928Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal2205, 2507Current
ASTM A995Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing PartsCD3MN, CE3MN, CD3MWCuNCurrent
Steel, carbon and structural: 358 specs
SpecTitleAlloysStatusReplaced by
A-A-1003Steel Bar, ReinforcingCancelled 1996ASTM A615
A-A-2211Wire Fabric, Steel, Welded (for Concrete Reinforcement)Cancelled 1993ASTM A185
A-A-51482Wire Snare, No. 24 Stubs Wire Gage, Carbon SteelCancelled 1999
AMS 4000Aluminum Sheet and Plate (1060-0)1060Current
AMS 5010Steel Bars Free-Machining Cold Drawn (SAE 1212 or SAE 1215) (Stabilized Type)1212, 1215Stabilized 2014
AMS 5020Steel Bars, Forgings, and Tubing, Free-Cutting 1.5Mn-0.25Pb (0.32 - 0.39C) (11L37)Cancelled 2009
AMS 5022Steel Bars, Forgings, and Tubing, Free Cutting 0.14 - 0.20C (SAE 1117)1117Current
AMS 5024Steel Bars, Forgings, and Tubing, Free-Cutting 1.5MN (0.32 - 0.39C) (SAE 1137)1137Current
AMS 5032Wire Steel 0.18 - 0.23C (SAE 1020) Annealed1020Likely current
AMS 5036Steel Sheet and Strip, Aluminum Coated, Low CarbonCurrent
AMS 5040Steel, Sheet and Strip 0.15 Carbon, Maximum Deep Forming Grade1010Current
AMS 5042Steel, Sheet and Strip 0.15 Carbon, Maximum Forming Grade1010Current
AMS 5043Steel, Sheet and Strip, Forming (Special Quality), Low Carbon1010To confirm
AMS 5044Steel, Sheet and Strip 0.15 Carbon, Maximum Half Hard Temper1010Current
AMS 5045Steel, Sheet and Strip 0.25 Carbon, Maximum Hard Temper1010Current
AMS 5046Sheet Strip and Plate, Carbon Steel (SAE 1020 and 1025) Annealed1020Current
AMS 5047Steel Sheet and Strip 0.08-0.13C, Aluminum Killed Deep Forming Grade1010Current
AMS 5050Steel Tubing, Seamless 0.15 Carbon, Maximum Annealed1010Current
AMS 5053Steel Tubing, Welded 0.13 Carbon, Maximum Annealed1010Cancelled 2010
AMS 5060Steel Bars, Forgings, and Tubing 0.13 - 0.18C (SAE 1015)1015Current
AMS 5061Steel, Low Carbon, Bars and Wire 0.08 TO 0.20 CCurrent
AMS 5062Steel, Low Carbon, Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum1010, 1018, 1020Current
AMS 5069Steel Bars, Forgings, and Tubing 0.15 - 0.20C (SAE 1018)1018Current
AMS 5070Steel, Bars and Forgings 0.18 - 0.23C (SAE 1022)1022Likely current
AMS 5075Steel Tubing, Seamless 0.22 - 0.28C (SAE 1025) Cold Drawn and Stress Relieved1025Current
AMS 5077Steel Tubing, Welded (0.22 - 0.28C) (SAE 1025) Normalized or Stress Relieved1025Cancelled 2012
AMS 5080Steel Bars, Forgings, and Tubing 0.31 - 0.38C (SAE 1035)1035Current
AMS 5082Steel Tubing, Seamless 0.31 - 0.38C (SAE 1035) Stress Relieved1035Likely current
AMS 5085Steel Sheet, Strip, and Plate 0.48 - 0.55C (SAE 1050)Annealed1050Current
AMS 5110Carbon Steel, Wire and Springs 0.75 - 0.88C (SAE 1080) Spring Temper, Cold Drawn1080Likely current
AMS 5112Carbon Steel, Wire Spring Quality Music Wire 0.70 - 1.00C Cold Drawn1090Likely current
AMS 5115Wire, Carbon Steel 0.60 - 0.75C Hardened and TemperedCurrent
AMS 5120Steel Strip 0.68 - 0.80C STRIP (SAE 1074)1074Current
AMS 5121Sheet and Strip, Steel (0.90 - 1.04C) (SAE 1095) Annealed1095Current
AMS 5122Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper1095Current
AMS 5132Steel, Bars 0.90 - 1.30CCurrent
AMS 6362Steel Tubing, Seamless, 0.95Cr 0.20Mo (0.28-0.33C)(SAE 4130) 150 ksi (1034 MPa) Tensile Strength4130, 1034Current
AMS 6400Forgings, Steel For Aircraft/Aerospace EquipmentLikely current
AMS 7311Piston Rings, Centrifugally-Case Alloyed Iron 0.50Mo - 0.50CuLikely current
AMS 7707Iron Commercially Pure Bar Sheet Strip and Plate Hot Rolled UnannealedLikely current
AMS-F-7190Forging, Steel, For Aircraft/Aerospace Equipment And Special Ordnance ApplicationsCurrent
AMS-QQ-S-700Steel, Sheet and Strip, Medium and High CarbonCancelled 2010
AMS-S-7952Steel, Sheet and Strip, 1025 (title unconfirmed)1025To confirm
AMS-S-8559Steel Bars, Carbon, AISI, (1095) Aircraft Quality No S/S Document)1095Cancelled 2016
AMS-T-5066Tubing, Carbon Steel (1025), (Aircraft Quality)1025Current
ASME SA-20General Requirements for Steel Plates for Pressure VesselsA516 Gr 70, A285 Gr C, A515 Gr 70Current
ASME SA-29Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for1018, 1045Current
ASME SA-53Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessA53 Gr A, A53 Gr BCurrent
ASME SA-105Specification for Carbon Steel Forgings for Piping ApplicationsA105Current
ASME SA-106Seamless Carbon Steel Pipe for High-Temperature ServiceA106 Gr A, A106 Gr B, A106 Gr CCurrent
ASME SA-108Specification for Steel Bar, Carbon and Alloy, Cold-Finished1018, 1045Current
ASME SA-178Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater TubesA178 Gr A, A178 Gr CCurrent
ASME SA-179Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser TubesA179Current
ASME SA-181Specification for Carbon Steel Forgings, for General-Purpose PipingA181 Class 70Current
ASME SA-192Seamless Carbon Steel Boiler Tubes for High-Pressure ServiceA192Current
ASME SA-210Seamless Medium-Carbon Steel Boiler and Superheater TubesA210 Gr A-1, A210 Gr CCurrent
ASME SA-214Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser TubesA214Current
ASME SA-226Electric-Resistance-Welded Carbon Steel Boiler and Superheater Tubes for High-Pressure ServiceA226Withdrawn
ASME SA-266Specification for Carbon Steel Forgings for Pressure Vessel ComponentsA266 Class 2Current
ASME SA-285Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile StrengthA285 Gr CCurrent
ASME SA-334Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature ServiceA334 Gr 1, A334 Gr 6Current
ASME SA-515Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature ServiceA515 Gr 70Current
ASME SA-516Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature ServiceA516 Gr 70, A516 Gr 65, A516 Gr 60, A516 Gr 55Current
ASME SA-537Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon SteelA537 Cl 1Current
ASME SA-662Standard Specification for Pressure Vessel Plates, Carbon-Manganese, for Moderate and Lower Temperature ServiceA662 Gr BCurrent
ASME SA-675Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties1020, 1030, 1045Current
ASME SA-694Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission ServiceA694 F60Current
ASME SA-696Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components1018, 1020Current
ASME SA-737Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy SteelA737 Gr BCurrent
ASME SA-738Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature ServiceA738 Gr BCurrent
ASME SA-765Specification for Carbon Steel and Low-Alloy Steel Forgings With Mandatory Toughness RequirementsA765 Grade IICurrent
ASTM A6General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet PilingA36, A572 Gr 50, A588, A992, A709 Gr 50Current
ASTM A20General Requirements for Steel Plates for Pressure VesselsA516 Gr 70, A285 Gr C, A515 Gr 70, A537 Cl 1, A517 Gr BCurrent
ASTM A29General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought4130, 4140, 4340, 8620, 4150, 52100, 9310, 1018 …Current
ASTM A36Carbon Structural SteelA36Current
ASTM A53Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessA53 Gr A, A53 Gr BCurrent
ASTM A105Carbon Steel Forgings for Piping ApplicationsA105Current
ASTM A106Seamless Carbon Steel Pipe for High-Temperature ServiceA106 Gr A, A106 Gr B, A106 Gr CCurrent
ASTM A108Steel Bar, Carbon and Alloy, Cold-Finished4130, 4140, 4340, 8620, 1018, 1020, 1025, 1045 …Current
ASTM A109Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled1008, 1010, 1018, 1020Current
ASTM A120Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless, for Ordinary UsesA120Withdrawn 1987ASTM A53
ASTM A135Electric-Resistance-Welded Steel PipeA135 Gr A, A135 Gr BCurrent
ASTM A139Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)A139 Gr A, A139 Gr B, A139 Gr C, A139 Gr D, A139 Gr ECurrent
ASTM A178Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater TubesA178 Gr A, A178 Gr C, A178 Gr DCurrent
ASTM A179Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser TubesA179Current
ASTM A181Carbon Steel Forgings, for General-Purpose PipingA181 Class 60, A181 Class 70Current
ASTM A192Seamless Carbon Steel Boiler Tubes for High-Pressure ServiceA192Current
ASTM A210Seamless Medium-Carbon Steel Boiler and Superheater TubesA210 Gr A-1, A210 Gr CCurrent
ASTM A214Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser TubesA214Current
ASTM A226Specification for Electric-Resistance-Welded Carbon Steel Boiler Superheater Tubes for High-Pressure ServiceA226Withdrawn 1997
ASTM A227Steel Wire, Cold-Drawn for Mechanical SpringsHard-drawn spring wireCurrent
ASTM A228Steel Wire, Music Spring QualityMusic wireCurrent
ASTM A229Steel Wire, Quenched and Tempered for Mechanical SpringsOil-tempered spring wireCurrent
ASTM A230Steel Wire, Carbon Valve Spring QualityOil-tempered valve spring wireCurrent
ASTM A242High-Strength Low-Alloy Structural SteelA242Current
ASTM A252Welded and Seamless Steel Pipe PilesA252 Gr 1, A252 Gr 2, A252 Gr 3Current
ASTM A266Carbon Steel Forgings for Pressure Vessel ComponentsA266 Class 1, A266 Class 2, A266 Class 3, A266 Class 4Current
ASTM A283Low and Intermediate Tensile Strength Carbon Steel PlatesA283 Gr CCurrent
ASTM A285Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile StrengthA285 Gr CCurrent
ASTM A311Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements1018, 1035, 1045, 1137, 1141, 1144, 12L14, 1117 …Current
ASTM A334Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature ServiceA334 Gr 1, A334 Gr 6Current
ASTM A366Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled1008, 1010Withdrawn 2000 (still common)ASTM A1008
ASTM A407Steel Wire, Cold-Drawn, for Coiled-Type SpringsCold-drawn spring wireCurrent
ASTM A417Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring UnitsA417 Spring wireWithdrawn 2008
ASTM A421Stress-Relieved Steel Wire for Prestressed ConcretePrestressing wireCurrent
ASTM A424Steel, Sheet, for Porcelain EnamelingA424 Type 1, A424 Type 2Current
ASTM A441Standard Specification for High-Strength Low-Alloy Structural Manganese Vanadium SteelA441WithdrawnASTM A572, ASTM A588
ASTM A442Standard Specification for Pressure Vessel Plates, Carbon Steel, Improved Transition PropertiesA442 Gr 60, A442 Gr 55WithdrawnASTM A516
ASTM A450General Requirements for Carbon and Low Alloy Steel TubesA179, A192, A210 Gr A-1, A178 Gr A, A214Current
ASTM A455Pressure Vessel Plates, Carbon Steel, High-Strength ManganeseA455Current
ASTM A463Steel Sheet, Aluminum-Coated, by the Hot-Dip ProcessA463 Type 1, A463 Type 2Current
ASTM A500Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and ShapesA500 Gr A, A500 Gr B, A500 Gr C, A500 Gr DCurrent
ASTM A501Hot-Formed Welded and Seamless Carbon Steel Structural TubingA501 Gr A, A501 Gr BCurrent
ASTM A510General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel1005, 1006, 1008, 1010, 1015, 1018, 1022, 1035 …Current
ASTM A512Cold-Drawn Buttweld Carbon Steel Mechanical Tubing1008, 1010, 1015, 1020, 1025Current
ASTM A513Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing4130, 4140, 1008, 1010, 1015, 1020, 1026, 1030 …Current
ASTM A515Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature ServiceA515 Gr 70Current
ASTM A516Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature ServiceA516 Gr 70, A516 Gr 65, A516 Gr 60, A516 Gr 55Current
ASTM A519Seamless Carbon and Alloy Steel Mechanical Tubing4130, 4140, 4340, 8620, 1010, 1018, 1020, 1026 …Current
ASTM A524Seamless Carbon Steel Pipe for Atmospheric and Lower TemperaturesA524 Gr I, A524 Gr IICurrent
ASTM A529High-Strength Carbon-Manganese Steel of Structural QualityA529 Gr 50, A529 Gr 55Current
ASTM A530General Requirements for Specialized Carbon and Alloy Steel PipeA333 Gr 6, A524 Gr ICurrent
ASTM A537Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon SteelA537 Cl 1Current
ASTM A556Seamless Cold-Drawn Carbon Steel Feedwater Heater TubesA556 Gr A2, A556 Gr B2, A556 Gr C2Current
ASTM A557Standard Specification for Electric-Resistance-Welded Carbon Steel Feedwater Heater TubesA557 Gr A2, A557 Gr B2Current
ASTM A568Steel, Sheet, Carbon, Structural, and High-Strength Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for1008, 1010Current
ASTM A569Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial1010Withdrawn 2000 (still common)ASTM A1011
ASTM A570Steel, Sheet and Strip, Carbon, Hot-Rolled1010Withdrawn 2000 (still common)ASTM A1011
ASTM A572High-Strength Low-Alloy Columbium-Vanadium Structural SteelA572 Gr 42, A572 Gr 50, A572 Gr 55, A572 Gr 60, A572 Gr 65Current
ASTM A575Steel Bars, Carbon, Merchant Quality, M-Grades1008, 1010, 1015, 1016, 1018, 1020, 1022, 1025 …Current
ASTM A576Steel Bars, Carbon, Hot-Wrought, Special Quality1010, 1015, 1018, 1020, 1025, 1030, 1035, 1040 …Current
ASTM A588High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion ResistanceA588Current
ASTM A606Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion ResistanceA606 Type 4, A606 Type 5Current
ASTM A607Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled1010Withdrawn 2000 (still common)ASTM A1011, ASTM A1008
ASTM A611Structural Steel (SS), Sheet, Carbon, Cold-Rolled1008, 1010Withdrawn 2000 (still common)ASTM A1008
ASTM A618Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural TubingA618 Gr Ia, A618 Gr Ib, A618 Gr II, A618 Gr IIICurrent
ASTM A619Steel, Sheet, Carbon, Cold-Rolled, Drawing Quality1008, 1010WithdrawnASTM A1008
ASTM A620Drawing Steel (DS), Sheet, Carbon, Cold-Rolled1008, 1010Withdrawn 2000ASTM A1008
ASTM A621Steel, Sheet and Strip, Carbon, Hot-Rolled, Drawing Quality1010WithdrawnASTM A1011
ASTM A622Drawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled1010Withdrawn 2000ASTM A1011
ASTM A633Normalized High-Strength Low-Alloy Structural Steel PlatesA633 Gr A, A633 Gr C, A633 Gr D, A633 Gr ECurrent
ASTM A641Zinc–Coated (Galvanized) Carbon Steel WireLow-carbon wireCurrent
ASTM A653Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip ProcessA653 CS Type B, A653 FS, A653 DDS, A653 SS Gr 33, A653 HSLAS Gr 50Current
ASTM A656Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved FormabilityA656 Gr 50, A656 Gr 60, A656 Gr 70, A656 Gr 80Current
ASTM A662Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature ServiceA662 Gr BCurrent
ASTM A663Steel Bars, Carbon, Merchant Quality, Mechanical Properties1010, 1015, 1018, 1020, 1025, 1030, 1035, 1045Current
ASTM A668Steel Forgings, Carbon and Alloy, for General Industrial Use4140, 4340, 1018, 1030, 1045, 1050, 1117, 1141Current
ASTM A671Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower TemperaturesA671 CC65, A671 CC70, A671 CB70Current
ASTM A672Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate TemperaturesA672 C65, A672 C70, A672 B60Current
ASTM A675Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties1010, 1015, 1018, 1020, 1025, 1030, 1035, 1040 …Current
ASTM A678Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel PlatesA678 Gr A, A678 Gr B, A678 Gr C, A678 Gr DWithdrawn 2010
ASTM A682Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For1050, 1074, 1095, 1055, 1060, 1065, 1070, 1075 …Withdrawn 2009ASTM A684
ASTM A684Steel, Strip, High-Carbon, Cold-Rolled1074, 1095, 1050, 1055, 1060, 1065, 1070, 1075 …Current
ASTM A694Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission ServiceA694 F42, A694 F52, A694 F60, A694 F65, A694 F70Current
ASTM A696Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components1018, 1020, 1030, 1045Current
ASTM A707Forged Carbon and Alloy Steel Flanges for Low-Temperature ServiceA707 L1, A707 L2, A707 L3Current
ASTM A709Structural Steel for BridgesA709 Gr 36, A709 Gr 50, A709 Gr 50W, A709 Gr HPS 70W, A709 Gr HPS 100WCurrent
ASTM A711Steel Forging Stock1018, 1045, 1050, 1117, 1141, 1144Current
ASTM A714High-Strength Low-Alloy Welded and Seamless Steel PipeA714Withdrawn 2014
ASTM A737Pressure Vessel Plates, High-Strength, Low-Alloy SteelA737 Gr BCurrent
ASTM A738Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature ServiceA738 Gr BCurrent
ASTM A755Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building ProductsA755 Galvanized prepaintedCurrent
ASTM A765Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness RequirementsA765 Grade I, A765 Grade IICurrent
ASTM A787Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing1008Current
ASTM A792Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip ProcessA792 CS Type B, A792 SS Gr 50Current
ASTM A795Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection UseA795 Type E, A795 Type F, A795 Type SCurrent
ASTM A847Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion ResistanceA847Current
ASTM A853Steel Wire, Carbon, for General UseLow-carbon wireCurrent
ASTM A875Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip ProcessA875 CS Type B, A875 SS Gr 33Current
ASTM A913High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)A913 Gr 50, A913 Gr 65, A913 Gr 70Current
ASTM A924General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip ProcessA924 Galvanized sheetCurrent
ASTM A945High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and ToughnessA945 Gr 50, A945 Gr 65Current
ASTM A992Structural Steel ShapesA992Current
ASTM A1003Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing MembersST33H, ST50HCurrent
ASTM A1008Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake HardenableA1008 CS Type B, A1008 DS Type B, A1008 DDS, A1008 EDDS, A1008 SS Gr 33, A1008 SS Gr 80, A1008 HSLAS, A1008 BHS …Current
ASTM A1011Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High-StrengthA1011 CS Type B, A1011 DS Type B, A1011 SS Gr 33, A1011 SS Gr 50, A1011 HSLAS Gr 50, A1011 UHSS, 1008, 1010Current
ASTM A1018Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High-StrengthA1018 CS, A1018 DS, A1018 SS, A1018 HSLASCurrent
ASTM A1039Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High-Strength, Produced by Twin-Roll Casting ProcessA1039 CS, A1039 SSCurrent
ASTM A1043Structural Steel with Low Yield to Tensile Ratio for Use in BuildingsA1043 Gr 36, A1043 Gr 50Current
ASTM A1046Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip ProcessA1046 CS Type BCurrent
ASTM A1064Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for ConcreteReinforcing wireCurrent
ASTM A1065Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield PointA1065Current
ASTM A1066High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)A1066 Gr 50, A1066 Gr 60, A1066 Gr 70, A1066 Gr 80, A1066 Gr 90, A1066 Gr 100Current
ASTM A1085Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)A1085 Gr ACurrent
DOD-F-24669Forgings and Forging Stock, Steel Bars, Billets and Blooms, General Specification for (metric)Current
EN 10016Non-Alloy Steel Rods for Drawing and/or Cold RollingC4D, C8DCurrent
EN 10025-1Hot Rolled Products of Structural Steels: General Technical Delivery ConditionsS235JRCurrent
EN 10025-2Hot Rolled Products of Structural Steels: Technical Delivery Conditions for Non-Alloy Structural SteelsS235JR, S275JR, S355J2Current
EN 10025-5Hot Rolled Products of Structural Steels: Technical Delivery Conditions for Structural Steels with Improved Atmospheric Corrosion ResistanceS355J2WCurrent
EN 10025-6Hot Rolled Products of Structural Steels: Technical Delivery Conditions for Flat Products of High Yield Strength Structural Steels in the Quenched and Tempered ConditionS690QLCurrent
EN 10028-2Flat Products Made of Steels for Pressure Purposes: Non-Alloy and Alloy Steels with Specified Elevated Temperature PropertiesP265GH, P355GHCurrent
EN 10083-2Steels for Quenching and Tempering, Part 2: Technical Delivery Conditions for Non-Alloy SteelsC22E, C35E, C45E, C60ECurrent
EN 10087Free-Cutting Steels: Technical Delivery Conditions11SMn30, 11SMnPb30Current
EN 10111Continuously Hot Rolled Low Carbon Steel Sheet and Strip for Cold FormingDD11, DD12, DD13To confirm
EN 10130Cold Rolled Low Carbon Steel Flat Products for Cold Forming: Technical Delivery ConditionsDC01, DC03, DC04Current
EN 10210-1Hot Finished Structural Hollow Sections of Non-Alloy and Fine Grain SteelsS355J2HCurrent
EN 10216-1Seamless Steel Tubes for Pressure Purposes: Non-Alloy Steel Tubes with Specified Room Temperature PropertiesP235TR1, P265TR2Current
EN 10217-1Welded Steel Tubes for Pressure Purposes: Non-Alloy Steel Tubes with Specified Room Temperature PropertiesP235TR1Current
EN 10219-1Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain SteelsS235JRH, S355J2HCurrent
EN 10255Non-Alloy Steel Tubes Suitable for Welding and Threading: Technical Delivery ConditionsS195TTo confirm
EN 10263Steel Rod, Bars and Wire for Cold Heading and Cold ExtrusionC4C, C15ECurrent
EN 10270-1Steel Wire for Mechanical Springs, Part 1: Patented Cold Drawn Unalloyed Spring Steel WireSL/SM/DM/SH/DH patented wireCurrent
EN 10270-2Steel Wire for Mechanical Springs, Part 2: Oil Hardened and Tempered Spring Steel WireFD/TD/VD oil-tempered wireCurrent
EN 10277Bright Steel Products: Technical Delivery Conditions (Parts 1 to 5)C45, 11SMn30Current
EN 10305-1Steel Tubes for Precision Applications: Seamless Cold Drawn TubesE235, E355Current
EN 10305-2Steel Tubes for Precision Applications: Welded Cold Drawn TubesE195, E235Current
EN 10346Continuously Hot-Dip Coated Steel Flat Products for Cold Forming: Technical Delivery ConditionsDX51D+Z, DX52D+ZCurrent
JIS G3101Rolled Steels for General StructureSS400, SS490Current
JIS G3106Rolled Steels for Welded StructureSM400, SM490Current
JIS G3114Hot-Rolled Atmospheric Corrosion Resisting Steels for Welded StructureSMA400W, SMA490WCurrent
JIS G3131Hot-Rolled Mild Steel Plates, Sheets and StripSPHC, SPHD, SPHECurrent
JIS G3141Cold-Reduced Carbon Steel Sheet and StripSPCC, SPCD, SPCECurrent
JIS G3302Hot-Dip Zinc-Coated Steel Sheets and CoilsSGCC, SGCHCurrent
JIS G3444Carbon Steel Tubes for General Structural PurposesSTK400, STK490Current
JIS G3445Carbon Steel Tubes for Machine Structural PurposesSTKM11A, STKM13ACurrent
JIS G3452Carbon Steel Pipes for Ordinary PipingSGPCurrent
JIS G3454Carbon Steel Pipes for Pressure ServiceSTPG370, STPG410Current
JIS G3466Carbon Steel Square Pipes for General Structural PurposesSTKR400Current
JIS G3506High Carbon Steel Wire RodsSWRHCurrent
JIS G3507-1Carbon Steel Wire Rods for Cold Heading (Part 1)SWRCHCurrent
JIS G3521Hard Drawn Steel WireSW-A, SW-B, SW-CCurrent
JIS G3522Piano WireSWP-A, SWP-BCurrent
JIS G4051Carbon Steels for Machine Structural UseS10C, S20C, S45C, S55CCurrent
JIS G4804Sulfur and Sulfur Composite Free-Cutting Steel BarsSUM22, SUM24LCurrent
MIL-B-11953Brushes, Carbon Renoving, Tempered Steel Wire, 1/4 Inch ShankCancelled 1958
MIL-B-52239Bar, Connecting, Bridge, Steel: for Ponton Float, Half Sectional, Pneumatic, 12-TonCancelled 2017
MIL-C-14144Circuit Breakers, Manually Operated, Surface Mounted, Sheet-Steel Enclosed, 3-PoleCancelled 1955
MIL-DTL-21425Wire, Steel, High Carbon, Square, Uncoated, for Mechanical Springs (General Purpose)Inactive for new design 2026
MIL-DTL-24645Steel Plate, Sheet, or Coil, Age-Hardening, Structural, High Yield Strength (HSLA-80 and HSLA-100)HSLA-80, HSLA-100To confirm
MIL-DTL-46172Steel ForgingsCurrent
MIL-F-4273Foil, Magnetic Shielding, 0.003 Inches Thin-Gage SteelCancelled 1952MIL-S-4473
MIL-F-7190Forging, Steel, for Aircraft/Aerospace Equipment and Special Ordinance ApplicationsCancelled 1999AMS-F-7190
MIL-F-13854Forgings for Common Steel ShellCancelled 1974
MIL-F-17823Flanges, Pipe, Carbon Steel, 300 PSI, W.S.P. (Navy)Cancelled 1958
MIL-F-20670Flanges, Pipe, Carbon Steel, 150 P.S.I., W.S.P. (For Naval Shipboard Use)Inactive for new design 2020
MIL-F-24669/8Forgings and Forging Stock, Steel for Integral Steam Turbine RotorsInactive for new design 2022
MIL-I-7495Iron, Sheet (for Porcelain Enameling) (Supersedes 10246)Cancelled 1952
MIL-I-11695Iron, Magnetic, Bar, Sheet and StripCancelled 1986ASTM A848
MIL-I-20144Iron, Wrought, Plates, BlackCancelled 1951
MIL-I-50711Iron-Base Sintered Metal Bars (Oil Impregnated)Cancelled 1992ASTM B328
MIL-J-2948Joint, Steel, Flexible (for Temporary Pipe ConnectionsCancelled 1985
MIL-L-40064Loading Plates, Steel and AluminumCancelled 2022
MIL-M-11383Mat, Landing (Steel, Welded Wire Fabric Type, 87-Inch by 77-Feet, 3-Foot Roll)Cancelled 1952
MIL-R-1223Rivet and Rivet Steel BarsCancelled 1986
MIL-R-10185Rings, Breech, Steel Forgings forInactive for new design 2014
MIL-S-860Steel Forgings for Steam Turbine RotorsCancelled 1991MIL-F-24669/8
MIL-S-866Steel, Bar and Billet (for Carburizing)Cancelled 1986
MIL-S-891Steel, Machinery, Cold-Rolled or Cold Drawn; Bars and RodsCancelled 1951MIL-S-16782
MIL-S-3090Steel, Remelting Stock, CarbonCancelled 1968
MIL-S-3289Steel, Plate and Disk, Carbon, Forging QualityCancelled 2009
MIL-S-3917Steel, Bar, Carbon, Free CuttingCancelled 1977ASTM A108
MIL-S-4174Steel Sheet and Strip, Flat, Aluminum Coated Low CarbonCancelled 1989AMS 5036, ASTM A463
MIL-S-7097Steel, Carbon (1018, 1020, or 1025) Bars and Forging Stock1018Cancelled 1953QQ-S-633
MIL-S-7947Steel, Sheet and Strip (1095) (aircraft Quality)1095Cancelled 2002AMS 5121, AMS 5122
MIL-S-7952Steel, Sheet and Strip, Low-Carbon 1025 (title unconfirmed)1025Cancelled 2002 (still common)AMS 5046
MIL-S-8143Steel, Sheet and Strip, Uncoated, Carbon, (AISI 1070)1070Cancelled 1959
MIL-S-8559Steel Bars, Carbon, AISI (1095), Aircraft Quality1095Cancelled 1999AMS-S-8559
MIL-S-8617Steel Bars, Carbon, (1035) (aircraft Quality)1035Cancelled 1960
MIL-S-8967Steel Bars, Wire, Forging Stock, Forgings, Mechanical Tubing, (431) Premium QualityCancelled 1991
MIL-S-11310Steel: Carbon and Alloy Bars and Rods (title unconfirmed)1018, 1045Cancelled 2025
MIL-S-13040Steel Bars and Tubes for Piston Rods and Cylinders for Hydro-Pneumatic Recoil Mechanisms and Equilibrators.Cancelled 1953
MIL-S-13048Steel Forgings (for General Purpose Applications)Cancelled 1975MIL-S-46172
MIL-S-13433Steel Bars, Carbon (leaded, High Sulfur)Cancelled 1962QQ-S-637
MIL-S-13502Steel, Carbon, Ord 1050 Modified, Bars and ShapesCancelled 1954
MIL-S-13631Steel, Strip, Cold Rolled Annealed (for Small Arms Springs).Cancelled 1962
MIL-S-16113Steel Plate, High Tensile (ht), Hull & StructuralCancelled 1981MIL-S-22698
MIL-S-16124Steel, Free Cutting, Cold Drawn Bars (pearlitic Manganese)Cancelled 1984
MIL-S-16197Steelsheet, Low-Carbon, Porcelain Enamel CoatedCancelled 1954
MIL-S-16312Strand, Steel Wire, Zinc-Coated (for Nets)Cancelled 1954
MIL-S-16611Steel Forging, Free Cutting, Pearlitic ManganeseCancelled 1952
MIL-S-16782Steel, Machinery, Cold-Rolled or Cold Drawn, Bars and RodsCancelled 1953QQ-S-633
MIL-S-16788(title not confirmed) SteelInactive for new design 2021
MIL-S-18411Steel Bars, Carbon, Cold Finished, Free MachiningCancelled 1955QQ-S-637
MIL-S-18957Steel Deck Plates, Dimpled, and Dimpled and Tie-Down FittedCancelled 1988
MIL-S-19657Steel Forgings, Photomicrographic Standards forCancelled 1985
MIL-S-20143Steel, Sheet, for the Manufacture of Metal FurnitureCancelled 1961QQ-S-692
MIL-S-20145Steel, IngotsCancelled 1951
MIL-S-20166Steel Structural Shapes, Weldable Medium Carbon and High Tensile, Hull and StructuralCancelled 1981MIL-S-22698
MIL-S-20427Shell, Steel, Manufactured from Forgings, for Medium Caliber Recoilless RiflesCancelled 1974
MIL-S-20428Shell, Steel, Manufactured from Bar StockCancelled 1974
MIL-S-22698Steel Plate, Shapes and Bars, Weldable, Ordinary Strength and Higher Strength: Hull Structural (title recalled)Hull structural steelCurrent
MIL-S-23495Steel, Carbon, Extrusions, Structual for Ships (for Future AcquisitionCancelled 1987MIL-S-22698
MIL-S-24062Sprayable Vibration Damping Material for Light Steel PlateCancelled 1982
MIL-S-24094Steel Plate, High Tensile (ht), Hull and StructuralCancelled 1964MIL-S-16113
MIL-S-24645Steel Plate, Sheet, or Coil, Age-Hardening, Structural, High Yield Strength (HSLA-80 and HSLA-100)HSLA-80, HSLA-100To confirmMIL-DTL-24645
MIL-S-45203Steel Forgings (for Critical Applications), Use Mil-S-46172Cancelled 1967MIL-S-46172
MIL-S-46049Strip, Metal, Carbon Steel, Cold Rolled, Hardened and Tempered Spring QualityInactive for new design 2014
MIL-S-46070(title not confirmed) SteelTo confirm
MIL-S-48403Steel Sheet, Hot-Dip, Zinc-Coated (Galvanized), Minimized Spangle, For Automotive Vehicle Body UseCancelled 2011
MIL-T-2914Tubing, Steel, Seamless, Diesel-Engine-Fuel-InjectionCancelled 1951
MIL-T-3520Tube, Steel, Low-Carbon, Mechanical (title unconfirmed)1010, 1020Cancelled 1996
MIL-T-4377Tubing-Welded, Round, Carbon Steel StructuralCancelled 1951QQ-T-830
MIL-T-5066Tubing, Steel, Carbon, Seamless or Welded (Aircraft Quality)1025Cancelled 1999 (still common)AMS-T-5066
MIL-T-16286Tube, Steel, Seamless, Marine Boiler ApplicationCurrent
MIL-T-16343Tubing, Steel, Carbon, StructuralCancelled 1999ASTM A500
MIL-T-17168Tube and Pipe, Wrought Iron, Welded (navy)Cancelled 1955
MIL-T-17188Tube, Carbon Steel, Electric Resistance Welded, Marine BoilerCancelled 1988
MIL-T-20157Tube, Steel (title unconfirmed)1010Cancelled 1987
MIL-T-20160Tubing, Steel, Seamless or WeldedCancelled 1963WW-P-404
MIL-T-20162Tubing, Steel, Welded (including Resistance Welded) for Oil, Steam, or WaterCancelled 1951
MIL-T-20169Tubing, Steel, Resistance-Welded (for Oil, Steam, or Water)Cancelled 1951
MIL-T-22555Tubing, Steel Low Carbon, Annealed, Pressure TypeCancelled 1981MIL-T-5066
MIL-T-23153Table, Folding, Steel Tube (advance Base)Cancelled 1991AA-T-2753
MIL-T-52089Tube, Steel, Carbon, Mechanical, Shapes Other Than Round, Seamless and Welded.Cancelled 1960
MIL-T-81231Tubing, Carbon Steel, Galvanized, RoundCancelled 1986
MIL-W-585Wire Fabric: Steel, WeldedCancelled 1989ASTM A185, ASTM A740
MIL-W-806Wire, Armature-Banding, Steel, TinnedCancelled 1952
MIL-W-3068Wire, Armature Banding, Non-Magnetic Iron-Chrome-Nickle-AlloyCancelled 1952MIL-W-30508
MIL-W-3314Wire, Iron or Steel, GalvanizedCancelled 1991
MIL-W-6101Wire; Spring Steel (for Aircraft Applications)Cancelled 1955QQ-W-470
MIL-W-6940Wire Strand, Steel, Nonflexible (preformed)Cancelled 1987
MIL-W-8957Wire, Steel, Carbon High Strength (Future acquisition for this material should refer to ASTM specification ASTCancelled 2024
MIL-W-12567Wire Strand, Steel (Wires WS-3/U, WS-4/U, W-90, W-115, and W-116)Inactive for new design 2024
MIL-W-13604(title not confirmed) Wire, SteelMIL-W-13604 Spring wireCancelled 1962
MIL-W-16835Wire, Iron, DentimeterCancelled 1951
MIL-W-19869Wire, Steel, Carbon, Zinc-Coated (for Harbor Defense Nets)Cancelled 1957
MIL-W-19926Wire Fabric, Steel Welded (for Reinforcement)Cancelled 1957RR-W-375
MIL-W-23711Wire, Steel, Carbon, High StrengthCancelled 1981
QQ-F-455Floor Plate, Steel, Rolled (Modular for Concrete Floors)Cancelled 1974TT-C-535
QQ-F-461Floor, Plate, Steel, RolledCancelled 1977
QQ-I-676Iron, PigCancelled 1975
QQ-I-686Iron, Wrought, Bar, Single and Double RefinedCancelled 1970
QQ-I-716Iron and Steel, Sheet, Zinc-Coated (Galvanized)Cancelled 1960QQ-S-775
QQ-S-628Steel Bars and Forgings, GraphiticCancelled 1971QQ-T-570
QQ-S-630Steel, Bar, Carbon, Hot Rolled (Merchant Quality)Cancelled 1975
QQ-S-631Steel, Bar, Carbon, Hot Rolled (Special Quality)Cancelled 1975
QQ-S-632Steel Bar, Reinforcing (for Concrete)Cancelled 1986
QQ-S-633Steel Bars, Carbon, Cold-Finished, Standard Quality (title recalled)1010, 1018, 1020, 1035, 1045, 1095Cancelled 1965QQ-S-630, QQ-S-631
QQ-S-634Steel, Bar, Carbon, Cold-Finished, (standard Quality)Cancelled 1974
QQ-S-635Steel, Carbon Plates (title unconfirmed)1020, 1045, 1010Cancelled 1988ASTM A827
QQ-S-636Steel, Carbon (low-Carbon), Sheets and StripsCancelled 1947QQ-S-698
QQ-S-637Steel Bars, Carbon, Free-Cutting (Screw Stock) (title recalled)1117, 1137, 1141, 1212, 1213, 1215, 12L14Cancelled 1980ASTM A108
QQ-S-640Steel, Carbon: Sheet and StripCancelled 1963QQ-S-698, QQ-S-700, QQ-S-777
QQ-S-643Steel, Carbon: Tubing, Mechanical, Round: Seamless and WeldedCancelled 1961QQ-T-830
QQ-S-692Steel, Sheets, Carbon, Cold-RolledCancelled 1963QQ-S-698, QQ-S-700, QQ-S-777
QQ-S-693Steel, Sheet, Carbon, Hot-RolledCancelled 1963QQ-S-698, QQ-S-700, QQ-S-777
QQ-S-695Steel, Sheet, for Manufacture of Metal FurnitureCancelled 1960QQ-S-692
QQ-S-698Steel, Sheet and Strip, Low-Carbon1008, 1010Cancelled 2025 (still common)ASTM A1008, ASTM A1011
QQ-S-699Steel Sheets, Carbon, Hot-Rolled Heavy Gage Structural QualityCancelled 1974ASTM A570
QQ-S-700Steel Bars, Carbon, Hot-Rolled (title not confirmed)Cancelled 1999AMS-QQ-S-700
QQ-S-741Steel, Structural, Carbon (shapes, plates, bars; title unconfirmed)A36Cancelled 1987ASTM A36
QQ-S-775Steel Sheets, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip ProcessQQ-S-775 Galvanized sheetCancelled 1993ASTM A526, ASTM A527, ASTM A528, ASTM A642, ASTM A361, ASTM A444
QQ-S-775E(I1)Steel Sheets, Carbon, Zinc-Coated (galvanized) by the Hot-Dip ProcessCancelled 1993ASTM A526, ASTM A527, ASTM A528, ASTM A642, ASTM A444, ASTM A361
QQ-S-777Steel, Carbon, Strip, Cold Rolled, Untempered Spring QualityCancelled 1974
QQ-T-830Tube, Steel, (Carbon. Mechanical; Seamless and Welded)Cancelled 1973ASTM A512
QQ-W-409Wire, Steel, Carbon, (for Cold Heading and Cold Forging)Cancelled 1966QQ-W-405
QQ-W-414Wire, Steel, Carbon: Bookbinder (Future acquisition for this material may refer to TABLE I)Cancelled 2025
QQ-W-418Wire, Steel, Cold Drawn, for Concrete ReinforcementCancelled 1968ASTM A82
QQ-W-426Wire, Steel, Corrosion (and Heat) Resisting Cold Heading and Cold ForgingCancelled 1994
QQ-W-428Wire, Steel, Carbon, Spring (title not confirmed)QQ-W-428 Spring wireTo confirm
QQ-W-428/1Wire, Steel, High Carbon, Round, Type ICancelled 2004AMS-QQ-W-428/1
QQ-W-428/2Wire, Steel, High Carbon, Round, Type IIICancelled 2004
QQ-W-432Wire, Steel, MarketCancelled 1965QQ-W-461
QQ-W-461Wire, Steel, Carbon (Round, Bare, and Coated)Cancelled 1990ASTM A853, ASTM A818, ASTM A641, ASTM A809
QQ-W-465Wire, Steel (Carbon), Hard-Drawn, Spring and Zinc Coated High StrengthCancelled 1959QQ-W-428
QQ-W-470Wire, Steel, Carbon, Spring (title not confirmed)QQ-W-470 Spring wireTo confirm
SAE J403Chemical Compositions of SAE Carbon Steels1008, 1010, 1018, 1020, 1035, 1045, 1050, 1095Current
WW-P-406Pipe, Steel (Seamless and Welded, Black and Zinc-Coated) for Ordinary UseA53 Gr BCancelledASTM A53
Steel, alloy and high strength: 340 specs
SpecTitleAlloysStatusReplaced by
AMS 2251Tolerances Low Alloy Steel BarsCurrent
AMS 2252Tolerances Low-Alloy Steel Sheet, Strip and PlateCurrent
AMS 2253Tolerances Carbon and Alloy Steel TubingCurrent
AMS 2300Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection ProcedureCurrent
AMS 2301Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection ProcedureCurrent
AMS 2304Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection ProcedureCurrent
AMS 2370Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products and Forging StockCurrent
AMS 2806Identification, Bars, Wire, Mechanical Tubing, and Extrusions Carbon and Alloy Steels and Corrosion and Heat RCurrent
AMS 5328Steel Castings, Investment, 0.80CR - 1.8NI - 0.35MO (0.28 - 0.36C) (SAE 4330 Modified) Annealed4330Current
AMS 5329Steel Castings, Sand 0.80Cr - 1.8Ni - 0.35Mo (0.28 - 0.36C) (SAE 4330 Modified) Annealed4330Cancelled 2001
AMS 5330Steel, Castings, Investment, 0.80 CR - 1.8NI - 0.35MO (0.38 - 0.46C) (SAE 4340 Modified) Annealed4340Current
AMS 5331Steel Castings, Sand 0.82Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340) Normalized and Tempered4340Cancelled 2002
AMS 5333Steel, Investment Castings, 0.50CR-0.55NI-0.25MO (0.11-0.17C) (SAE 8615) Normalized8615Current
AMS 5334Steel, Investment Castings 0.50CR - 0.55NI - 0.20MO (0.25 - 0.35C) (SAE 8630 Mod) Normalized and Tempered8630Current
AMS 5335Steel Castings, Sand 0.65Cr - 0.75Ni - 0.20Mo (0.25 - 0.33C) (SAE 8630 Modified) Normalized and Tempered8630Cancelled 2001
AMS 5336Steel, Investment Castings 0.95CR - 0.20MO (0.25 - 0.35C) (SAE 4130 MOD) Normalized or Normalized and Tempered4130Current
AMS 5337Steel, Maraging, Investment Castings 18.5Ni - 9.0Co - 5.0Mo - 0.70Ti - 0.12Al Vacuum Melted Homogenized, Overaged, and Solution Heat TreatedMaraging 300Likely current
AMS 5338Steel, Investment Castings, 0.95Cr - 0.20Mo (0.35 - 0.45C) (SAE 4140 Mod) Normalized or Normalized and Tempere4140Current
AMS 5339Steel, Maraging, Investment Castings 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated (Stabilized: Jun 2022)Maraging 250Stabilized 2022
AMS 5625Steel Bars, High Expansion 9.5Ni - 5.5Mn (0.55 - 0.65C) Cold FinishedCancelled 2003
AMS 5922Steel Corrosion-Resistant Bars and Forgings 10Cr - 5.5Ni - 14Co - 2Mo - 1W (0.19-0.23C) Vacuum Induction Melted Vacuum Arc Remelted Normalized AnnealedFerrium S53Likely current
AMS 6250Steel Bars, Forgings, and Tubing, 1.5CR - 3.5NI (0.07 - 0.13C) (SAE 3310)Current
AMS 6255Steel Bars, Forgings, and Mechanical Tubing and Forging Stock 1.1Si - 1.45Cr - 1.0Mo - 0.08Al (0.16 - 0.22C) Double Vacuum MeltedLikely current
AMS 6257Steel Bars, Forgings, Forging Stock, and Mechanical Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) Consumable Electrode Vacuum Remelted Normalized and Tempered300MLikely current
AMS 6260Steel, Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.07 - 0.13C) (SAE9310)9310Current
AMS 6263Steel Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) (9315)9315Likely current
AMS 6264Steel, Carburizing Grade, Bars, Forgings, and Tubing 1.2CR - 3.2NI - 0.12MO - (0.14-0.20C) (SAE9317)9317Current
AMS 6265Steel, Bars, Forgings, Mechanical Tubing and Forging Stock 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (9310) Vacuum Consumable Electrode Remelted9310Likely current
AMS 6270Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.13-0.18C) (SAE 8615)8615Current
AMS 6272Steel Bars Forgings and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.15 - 0.20C) (SAE 8617)8617Likely current
AMS 6274Steel Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620)8620Current
AMS 6277Steel Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Arc or Electroslag8620Cancelled 2023
AMS 6278Steel, Bars, Forgings, and Tubing 4.1Cr - 3.4Ni - 4.2Mo - 1.2V (0.11 - 0.15C) Premium Aircraft-Quality for Bearing Applications Double Vacuum MeltedLikely current
AMS 6280Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630)8630Current
AMS 6281Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.33C) (SAE 8630)8630Likely current
AMS 6282Steel Tubing, Mechanical - 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (SAE 8735)8735Current
AMS 6290Steel Bars and Forgings, Carburizing 1.8NI - 0.25MO (0.11 - 0.17C) (SAE 4615)4615Current
AMS 6292Steel Bars and Forgings, Carburizing 1.8NI - 0.25MO (0.15 - 0.20C) (SAE 4617)4617Current
AMS 6294Steel Bars and Forgings, Carburizing 1.8NI - 0.25MO (0.17 - 0.22C) (SAE 4620)4620Current
AMS 6299Steel Bars, Forgings, and Tubing, Carburizing 0.50Cr - 1.8Ni - 0.25Mo (0.17 - 0.23C) (SAE 4320H4320Current
AMS 6300Steel Bars and Forgings 0.25Mo (0.35 - 0.40C) (SAE 4037)4037Current
AMS 6304Steel, Low - Alloy, Heat - Resistant, Bars, Forgings, and Tubing 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C)Current
AMS 6308Steel, Bars and Forgings 0.90SI - 1.0CR - 2.0NI - 3.2MO - 2.0CU - 0.10V (0.07 - 0.13C) Vacuum Arc or ElectroslCurrent
AMS 6312Steel Bars, Forgings, and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640)4640Likely current
AMS 6317Steel Bars and Forgings 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) Heat Treated, 125 ksi (862 MPa) Tensile Strength4640Likely current
AMS 6320Steel Bars, Forgings, And Rings 0.50cr - 0.55ni - 0.25mo (0.33 - 0.38c) Sae 8735)8735Current
AMS 6321Steel Bars, Forgings, and Tubing 0.42Cr - 0.30Ni - 0.12Mo - 0.003B (0.38 - 0.43C) (81b40)Cancelled 2005
AMS 6322Steel Bars, Forgings, and Rings 0.50Cr – 0.55Ni – 0.25Mo (0.38 – 0.43C) (SAE 8740)8740Current
AMS 6323Steel Tubing, Mechanical 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740)8740Current
AMS 6324Steel Bars, Forgings, and Tubing 0.65CR - 0.70NI - 0.25MO (0.38-0.43C) (SAE 8740 Modified)8740Current
AMS 6325Steel Bars and Forgings 0.50Cr 0.55Ni 0.25Mo (0.38 0.43C) (SAE 8740) Heat Treated 105 ksi (724 MPa) Tensile Strength8740Likely current
AMS 6327Steel Bars and Forgings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated 125 ksi (862 MPa) Tensile Strength8740Likely current
AMS 6328Steel, Bars, Forgings and Tubing 0.50CR - 0.55NI - 0.25MO(0.48-0.53C)(SAE8750)8750Current
AMS 6330Steel Bars, Forgings, and Tubing 0.65Cr - 1.25Ni (0.33 - 0.38C)Likely current
AMS 6340Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod) Consumable Electrode Vacuum Remelted4330Likely current
AMS 6342Steel Bars, Forgings, and Tubing 0.80Cr - 1.0Ni - 0.25Mo (0.38 - 0.43C) (SAE 9840) (Stabilized Type) - G984009840Stabilized 2015
AMS 6345Steel Sheet Strip and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Otherwise Heat Treated4130Likely current
AMS 6346Steel Bars 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130) Hardened and Tempered 125 Ksi (862 MPa) Tensile Strength4130Likely current
AMS 6348Steel, Bars 0.95CR - 0.20MO (0.28 TO 0.33C) (SAE 4130) Normalized4130Current
AMS 6349Steel Bars 0.95Cr - 0.20Mo (0.38 to 0.43C) (SAE 4140) Normalized4140Likely current
AMS 6350Steel Sheet, Strip, And Plate 0.95cr - 0.20mo (0.28 - 0.33c) (Sae 4130)4130Current
AMS 6351Steel Sheet, Strip, and Plate 0.9Cr - 0.20Mo (0.28 - 0.33C) (SAE4130) Spheroidized4130Current
AMS 6352Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE4135)4135Current
AMS 6354Steel, Sheet, Strip, and Plate 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C)Current
AMS 6355Steel Tubing, Mechanical, 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630)8630To confirm
AMS 6356Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo - (0.30 - 0.35C)(SAE 4132)4132Current
AMS 6357Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (8735)8735Likely current
AMS 6358Steel Sheet, Strip, and Plate 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740)8740Current
AMS 6359Steel Sheet, Strip, and Plate 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340)4340Current
AMS 6360Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Stress Relieved4130Current
AMS 6361Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 125 ksi (862 MPa) Tensile Strength4130Current
AMS 6365Steel Tubing, Seamless 0.95 CR - 0.20MO (0.33 - 0.38C) (SAE 4135) Normalized or Stress Relieved4135Current
AMS 6370Steel Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)4130Current
AMS 6371Steel, Mechanical Tubing 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)4130Current
AMS 6372Steel Tubing, Mechanical 0.95CR - 0.20MO (0.33 - 0.38C) (SAE 4135)4135Current
AMS 6373Steel, Welded Tubing 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)4130Current
AMS 6374Steel Tubing, Seam-Free, Round 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 95.0 ksi (655 MPa) Tensile Strength4130Current
AMS 6378Steel Bars 1.0cr - 0.20mo - 0.045se (0.39 - 0.48c) (4142h Modified) Die-drawn, 130.0 Ksi (896 Mpa) Yield Stren4142Current
AMS 6379Steel Bars 0.95Cr - 0.20Mo - 0.05TE (0.40 - 0.53C) (SAE 4140 Modified) Die Drawn and Tempered, 165,000 Psi (114140Cancelled 2001
AMS 6381Steel Tubing, Mechanical 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140)4140Current
AMS 6382Steel Bars, Forgings, And Rings 0.95cr - 0.20mo (0.38 - 0.43c) (Sae 4140) Annealed4140Current
AMS 6390Steel Tubing, Mechanical - 0.95Cr - 0.20Mo - (0.38 - 0.43C) (SAE 4140)4140Cancelled 1990AMS 6381
AMS 6395Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140)4140Current
AMS 6396Steel Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) AnnealedCurrent
AMS 6406Steel, Sheet, Strip, and Plate 1.6Si - 2.1Cr - 0.58Mo - 0.05V (0.41 - 0.46C)Cancelled 1995
AMS 6407Steel, Bars, Forgings, and Tubing 1.2CR - 2.0NI - 0.45MO (0.27 - 0.33C)Current
AMS 6409Steel, Bars, Forgings, and Tubing 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) Special Aircraft Quality C4340Current
AMS 6411Steel Bars Forgings and Tubing 0.88Cr 1.8Ni 0.42Mo 0.08V (0.28 0.33C) (4330 Mod) Consumable Electrode Remelted4330Likely current
AMS 6412Steel, Bars and Forgings, 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (4337)4337Current
AMS 6413Steel, Mechanical Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337)4337Likely current
AMS 6414Steel Bars, Forgings, and Tubing, 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Vacuum Consumable Electrode Remelted4340Current
AMS 6415Steel, Bars, Forgings, and Tubing 0.80CR-1.8NI-0.25MO (0.38-0.43C) (SAE4340)4340Current
AMS 6416Steel Bars, Forgings, and Tubing, 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.07V (0.41 - 0.46C)Cancelled 1981AMS 6419
AMS 6417Steel Bars, Forgings, and Tubing, 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40C) (300M)300MCurrent
AMS 6419Steel Bars, Forgings, and Tubing, 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.42C) (300M) Vacuum Consumable Electrode Remelted300MCurrent
AMS 6421Steel Bars, Forgings, & Tubing 0.80Cr-0.85Ni-0.20Mo-0.003B (0.35-0.40c) (modified 98B37)Cancelled 1971
AMS 6422Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified 98BV40)Current
AMS 6423Steel Bars, Forgings, and Tubing 0.92Cr - 0.75No - 0.52Mo - 0.003B - 0.04V (Modified 98BV40)Likely current
AMS 6424Steel Bars, Forgings, and Tubing 0.80CR - 1.8NI - 0.25MO (0.49 - 0.55C)Current
AMS 6425Steel, Bars, Forgings, and Tubing 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C) Consumable Electrode Vacuum MeltedHy-TufLikely current
AMS 6427Steel Bars, Forgings, and Tubing 0.88CR - 1.8NI - 0.42MO - 0.8V (0.25 - 0.33C)4330Current
AMS 6428Steel Bars, Forgings, and Tubing 0.80CR - 1.8NI - 0.35MO - 0.20V (0.32 - 0.38C) (4335 Modified)4335Current
AMS 6429Steel Bars, Forgings, Tubing, and Rings 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Consumable Electrode Vacuum Melted4335Likely current
AMS 6430Steel, Bars, Forgings, Tubing, and Rings 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C) (4335 Modifie4335Current
AMS 6431Steel, Bars, Forgings, Mechanical Tubing, and Forging Stock 1.05Cr - 0.55Ni - 1.0Mo - 0.11V (0.45 - 0.50C) (D6AC) Vacuum Consumable Electrode RemeltedD6ACLikely current
AMS 6432Steel Bars, Forgings, and Tubing 1.05Cr - 0.55Ni - 1.0Mo - 0.111 (0.43 - 0.49C)Cancelled 1995
AMS 6433Steel, Sheet, Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C)4335Current
AMS 6434Steel, Sheet, Strip, and Plate 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod)4335Current
AMS 6435Steel, Sheet, Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Vacuum Consumable Electrode Melted, Annealed4335Likely current
AMS 6437Steel, Sheet, Strip, and Plate 5.0Cr - 1.3MO - 0.50V (0.38 - 0.43C)(H-11)H11Current
AMS 6439Steel Sheet, Strip, and Plate 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.42 - 0.48C) (D6AC) Consumable Electrode Vacuum Melted, AnnealedD6ACLikely current
AMS 6440Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 - 1.05C) (SAE 52100) For Bearing Applications52100Likely current
AMS 6444Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 - 1.05C) (SAE 52100) Premium Aircraft-Quality, Consumable Electrode Vacuum Remelted52100Likely current
AMS 6446Steel Bars, Forgings, and Tubing 1.0Cr (0.98 - 1.10C) (SAE 51100) Electroslag Remelted100Cancelled 1995
AMS 6447Steel Bars, Forgings, and Tubing 1.4CR (0.98 - 1.10C) (SAE 52100) Electroslag Remelted52100Current
AMS 6448Steel, Bars, Forgings, and Tubing 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150)6150Likely current
AMS 6450Steel, Spring Wire and Springs 0.95CR-0.22V (0.48-O-53C) (SAE 6150) Annealed and Cold Drawn6150Current
AMS 6454Steel, Sheet, Strip, and Plate 1.8Ni - 0.80Cr - 0.25Mo (0.38 - 0.43C) (SAE 4340) Vacuum Consumable Electrode Remelted4340Likely current
AMS 6455Steel, Sheet, Strip, and Plate 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150)6150Current
AMS 6470Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr - 0.35Mo - 1.13A1(0.38 - 0.43C)Nitralloy 135MCurrent
AMS 6471Steel Nitriding Bars Forgings and Tubing 1.6Cr 0.35Mo 1.13Al (0.38 0.43C) (135 Mod) Consumable Electrode Vacuum MeltedNitralloy 135MLikely current
AMS 6472Steel Bars and Forgings Nitriding 1.6Cr 0.35Mo 1.1Al (0.38 0.43C) (135 Mod) Hardened and Tempered 112 ksi (772 MPa) Tensile StrengthNitralloy 135MLikely current
AMS 6475Steel Bars, Forgings, and Tubing, Nitriding 1.1CR - 3.5NI - 0.25MO - 1.2AL (0.21 - 0.26C)Current
AMS 6476Steel, Bars, Forgings, Mechanical Tubing and Forging Stock 0.50Cr - 0.12Mo (0.89 - 1.01C)Likely current
AMS 6477Steel, Bars, Forgings, and Tubing 0.80Cr (0.90 - 1.03C) For Bearing ApplicationsLikely current
AMS 6478Steel Bars and Forgings, AerMet 100AerMet 100To confirm
AMS 6481Steel Bars, Forgings, and Tubing, Nitriding 3Cr - 1Mo 0.2V (0.29 0.36C) Premium Aircraft-Quality for Bearing Applications Double Vacuum MeltedLikely current
AMS 6482Steel Bars Forgings and Tubing 1.5Si - 1.25Cr - 3.8Ni - 0.50Mo - 0.30V (0.40C) Vacuum Remelted AnnealedLikely current
AMS 6484Steel Bars, Forgings, and Tubing 0.80CR - 1.8NI - 0.25MO (0.38-0.43C) SAE 4340 Normalized and Tempered4340Current
AMS 6485Bars, Steel, and Forgings, 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C)H11Cancelled 2005
AMS 6487Steel, Bars, Forgings, and Forging Stock 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum Re- MeltedH11Likely current
AMS 6488Steel Bars and Forgings 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C)H11Cancelled 2005
AMS 6492Steel Bars Forgings and Tubing 1.0Cr 3.25Ni 0.40Mo (0.17 0.22C) Aircraft QualityLikely current
AMS 6494Steel Bars, Forgings, Mechanical Tubing, and Forging Stock, 1.0Cr - 2.50Ni - 2.0Mo - 1.10Si (0.10 - 0.20C), Aircraft- QualityLikely current
AMS 6496Steel Bars, Forgings, and Tubing, Nitriding 1.4Cr 1.2Mo 0.3V (0.29 0.36C) Aircraft-Quality for Bearing ApplicationsLikely current
AMS 6498Steel Bars, Forgings, and Tubing, Nitriding 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C) Double Vacuum Melted Premium Aircraft-Quality for Bearing ApplicationsLikely current
AMS 6499Steel Bars Forgings and Tubing 2.7Si - 0.85Cr - 1.8Ni - 0.4Mo - 0.2V - (0.37 - 0.44C) Double Vacuum MeltedLikely current
AMS 6509Steel Bars and Forgings 3.5Cr - 7.5Ni - 16.3Co - 1.75Mo - 0.2W - (0.09 - 0.13C) Double Vacuum Melted, Normalized, AnnealedLikely current
AMS 6511Steel, Maraging, Bars, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 18Ni - 8.5Co - 3.2Maraging 300Current
AMS 6512Steel, Maraging, Bars, Forgings, Mechanical Tubing, Rings, and Forging Stock 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Vacuum Melted, AnnealedMaraging 250Likely current
AMS 6514Steel, Maraging, Bars, Forgings, Mechanical Tubing, Rings and Forging Stock 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al Consumable Electrode Vacuum Melted, AnnealedMaraging 300Likely current
AMS 6515Steel, Maraging, Bars, Forgings, Mechanical Tubing, Rings, and Stock for Forging and Rings 18.5Ni - 12.0Co - 4Maraging 300Current
AMS 6516Steel, Bars and Forgings and Forging Stock 1Cr - 10Ni - 7Co - 2Mo - 1.3W - 0.1V - (0.28 - 0.32C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized and Annealed Precipitation HardenableFerrium M54Likely current
AMS 6517Steel, Bars, and Forgings 3.5Cr - 9.5Ni - 18Co - 1.1Mo (0.13 - 0.17C) Double Vacuum Melted, Normalized, AnnealedLikely current
AMS 6519Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni - 3.0Mo - 1.4Ti - 0.10Al Premium Aircraft Quality DoubMaraging 250Current
AMS 6520Steel, Maraging, Sheet, Strip, and Plate 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Melted, Solution Heat TreatedMaraging 250Likely current
AMS 6522Plate, Steel 2.0Cr - 10Ni - 14Co - 1.0Mo (0.13 - 0.17C) Vacuum Melted, Normalized, and OveragedCancelled 2005
AMS 6523Steel, Sheet, Strip, and Plate 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Vacuum Consumable Electrode Melted, Annealed9Ni-4CoLikely current
AMS 6526Steel, Bars, Forgings, Tubing, and Rings 1.0Cr - 7.5Ni - 4.5Co - 1.0Mo - 0.09V (0.29 - 0.34C) Consumable Electrode Vacuum Remelted, AnnealedHP 9-4-30Likely current
AMS 6527Steel, Bars and Forgings 2.0CR - 10NI - 14CO - 1.0MO - (0.15 - 0.19C) Vacuum Melted, Normalized and OveragedAF1410Current
AMS 6528Steel, Bars 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Special Aircraft Quality Cleanliness Normalized4130Likely current
AMS 6529Steel Bars 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Special Aircraft Quality Cleanliness Normalized4140Cancelled 2023
AMS 6530Steel Tubing, Seamless 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630)8630Cancelled 1995
AMS 6532Steel, Bars and Forgings 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted, Normalized and OveragedAerMet 100Current
AMS 6539Steel Bars Forgings and Tubing 1.7Cr - 3.8Ni - 0.3Mo (0.32 - 0.38C) Aircraft-QualityLikely current
AMS 6540Steel Bars, Forgings, Tubing, & Rings 0-48Cr-8.0Ni-4.0Co-0.48Mo-0.09V (0.24-0.30c) AnnealedCancelled 1971
AMS 6543Steel, Bars and Forgings 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) (HY-180) Double Vacuum Melted Solution Heat Treated, Marage HardenableLikely current
AMS 6544Steel, Plate 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) (HY-180) Double Vacuum Melted, Solution Heat TreatedLikely current
AMS 6545Steel Sheet, Strip, & Plate 0.48Cr-8.0Ni-4.0Co-0.48Mo-0.09V (0.24-0.30c) AnnealedCancelled 1971
AMS 6547Steel Bars, Forgings, and Tubing 1.0Cr - 3.2Ni - 0.2Mo (0.12 - 0.17C) Aircraft-QualityLikely current
AMS 6549Steel Bars, Forgings, and Tubing 1.0Cr - 3.2Ni - 0.2Mo (0.12 - 0.17C) Premium Aircraft-Quality Double Vacuum MeltedLikely current
AMS 6560Steel Bars, Wire and Forgings 10Co - 7Mo - 6V - 6W - 4Cr (2.2 - 2.4C) Premium Aircraft-Quality for Bearing Applications Inert Gas Atomized and Hot Isostatically Pressed ConsolidatedLikely current
AMS 6562Steel Bars Wire and Forgings 10 Co - 7 Mo - 6 V - 6 W - 4 Cr (2.2 - 2.4C) Premium Aircraft-Quality for Bearing Applications Inert Gas Atomized and Hot Isostatically Pressed ConsolidatedLikely current
AMS 7496Rings, Flash Welded Carbon and Low-Alloy SteelsLikely current
AMS-S-5000Steel, Chrome-Nickel-Molybdenum (E4340) Bars and Reforging Stock4340Cancelled 2010AMS 6415
AMS-S-5626Steel Bars, Rods and Reforging Stock, Chrome-Molybdenum (4140), Aircraft Quality4140To confirmAMS 6382, AMS 6349
AMS-S-6049Steel Bars and Reforging Stock, Chrome-Nickel-Molybdenum (8740), Aircraft Quality8740To confirmAMS 6322, AMS 6325, AMS 6327
AMS-S-6050Steel Bars and Reforging Stock, Chrome-Nickel-Molybdenum (8630), Aircraft Quality8630To confirmAMS 6280
AMS-S-6098Steel, Chrome-Nickel-Molybdenum (8735) Bars and Reforging Stock (aircraft Quality)8735Cancelled 2003
AMS-S-6758Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock (Aircraft Quality)4130CurrentAMS 6370, AMS 6348, AMS 6528
AMS-S-8690Steel Bars, Chrome-Nickel-Molybdenum (8620), Aircraft Quality8620To confirmAMS 6274
AMS-S-8949Steel Bars, Plates, Sheets, Billets, and Reforging Stock Type D6ACD6ACCancelled 2009
AMS-S-18728Steel Sheet, Strip and Plate, Alloy 86308630To confirm
AMS-S-18729Steel Sheet, Strip and Plate, Alloy 41304130To confirm
AMS-T-6735Tubing, Chrome-Molybdenum, 4135 Steel, Seamless Aircraft Quality4135Cancelled 2018AMS 6365, AMS 6372
AMS-T-6736Tubing, Chrome-Molybdenum (4130 or 8630) Steel, Seamless and Welded4130Cancelled 2018
ASME SA-193Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications4140, 4142Current
ASME SA-203Pressure Vessel Plates, Alloy Steel, NickelA203 Gr A, A203 Gr DCurrent
ASME SA-204Pressure Vessel Plates, Alloy Steel, MolybdenumA204 Gr BCurrent
ASME SA-302Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-NickelA302 Gr BCurrent
ASME SA-320Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service4140, 4340Current
ASME SA-333Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch ToughnessA333 Gr 3, A333 Gr 8, A333 Gr 6, A333 Gr 1Current
ASME SA-335Seamless Ferritic Alloy-Steel Pipe for High-Temperature ServiceA335 P11, A335 P22, A335 P91Current
ASME SA-336Alloy Steel Forgings for Pressure and High-Temperature PartsA336 F11, A336 F22, A336 F91Current
ASME SA-350Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping ComponentsA350 LF3, A350 LF787, A350 LF2Current
ASME SA-353Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered9NiCurrent
ASME SA-372Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels4130, 4140, 4340Current
ASME SA-387Pressure Vessel Plates, Alloy Steel, Chromium-MolybdenumA387 Gr 11, A387 Gr 22, A387 Gr 91Current
ASME SA-508Quenched and Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure VesselsA508 Gr 3, A508 Gr 22Current
ASME SA-517Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and TemperedA517 Gr B, A517 Gr FCurrent
ASME SA-519Seamless Carbon and Alloy Steel Mechanical Tubing4130, 4140, 4340, 8620Current
ASME SA-533Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-NickelA533 Type BCurrent
ASME SA-538Pressure Vessel Plates, Alloy Steel, Ultra High StrengthMaraging 250, Maraging 300Current
ASME SA-540Alloy-Steel Bolting for Special Applications4140, 4340Current
ASME SA-541Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel ComponentsA541 Gr 22, A541 Gr 3Current
ASME SA-542Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-VanadiumA542 Type DCurrent
ASME SA-553Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel9NiCurrent
ASTM A203Pressure Vessel Plates, Alloy Steel, NickelA203 Gr A, A203 Gr DCurrent
ASTM A204Pressure Vessel Plates, Alloy Steel, MolybdenumA204 Gr BCurrent
ASTM A290Carbon and Alloy Steel Forgings for Rings for Reduction Gears4340, 8620Current
ASTM A295High-Carbon Anti-Friction Bearing Steel52100Current
ASTM A302Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-NickelA302 Gr BCurrent
ASTM A304Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements4140, 4340, 8620, 5160Current
ASTM A320Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service4140, 4340Current
ASTM A322Steel Bars, Alloy, Standard Grades4130, 4140, 4340, 8620CurrentASTM A29
ASTM A331Steel Bars, Alloy, Cold-Finished4130, 4140, 4340, 8620Withdrawn 2004 (still common)ASTM A108
ASTM A333Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch ToughnessA333 Gr 3, A333 Gr 8, A333 Gr 1, A333 Gr 6, A333 Gr 7Current
ASTM A335Seamless Ferritic Alloy-Steel Pipe for High-Temperature ServiceA335 P11, A335 P22, A335 P91Current
ASTM A336Alloy Steel Forgings for Pressure and High-Temperature PartsA336 F11, A336 F22, A336 F91Current
ASTM A350Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping ComponentsA350 LF3, A350 LF787, A350 LF2, A350 LF1, A350 LF6, A350 LF9Current
ASTM A353Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel9NiCurrent
ASTM A372Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels4130, 4140, 4340Current
ASTM A387Pressure Vessel Plates, Alloy Steel, Chromium-MolybdenumA387 Gr 11, A387 Gr 22, A387 Gr 91Current
ASTM A434Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered4140, 4340Current
ASTM A505Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for4130, 4140Current
ASTM A506Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled4130, 4140Current
ASTM A507Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled4130Current
ASTM A508Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure VesselsA508 Gr 3, A508 Gr 22Current
ASTM A514High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for WeldingA514 Gr B, A514 Gr F, A514 Gr A, A514 Gr QCurrent
ASTM A517Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and TemperedA517 Gr B, A517 Gr F, A517 Gr ACurrent
ASTM A533Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-NickelA533 Type BCurrent
ASTM A538Pressure Vessel Plates, Alloy Steel, Ultra High StrengthMaraging 250, Maraging 300Current
ASTM A540Alloy-Steel Bolting for Special Applications4140, 4340Current
ASTM A541Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel ComponentsA541 Gr 22, A541 Gr 3Withdrawn 2025
ASTM A542Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-VanadiumA542 Type DCurrent
ASTM A553Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7 %, 8 %, and 9 % Nickel9NiCurrent
ASTM A579Superstrength Alloy Steel Forgings4340, 4330Withdrawn 2024
ASTM A646Premium Quality Alloy Steel Blooms and Billets for Forgings4340, 4330, 300M, 8620Current
ASTM A788Steel Forgings, General RequirementsA788 Carbon and alloy forgingsCurrent
ASTM A829Alloy Structural Steel Plates4130, 4140, 4340, 8620Current
ASTM A866Medium Carbon Anti-Friction Bearing SteelCurrent
DOD-F-24669/1Forgings and Forging Stock, Steel (carbon and Alloy) Blooms, Bars,billets and Slabs (metric)Current
DOD-F-24669/2Forgings and Forging Stock, Steel Bars and Billets - Chromium-Molybdenum Alloy (metric)Current
DOD-F-24669/3Forgines and Forging Stock, Steel Bars and Billets for Nitriding (metric)Current
DOD-F-24669/5Forgings and Forging Stock, Steel Bars, Billets and Wire (chromium-Nickel-Phosphorous and Chromium-Nickel-MangCancelled 2001
EN 10083-1Steels for Quenching and Tempering, Part 1: General Technical Delivery ConditionsCurrent
EN 10083-3Steels for Quenching and Tempering, Part 3: Technical Delivery Conditions for Alloy Steels4130, 4140, 4340Current
EN 10084Case Hardening Steels, Technical Delivery Conditions8620, 4320, 9310Current
EN 10250-3Open Die Steel Forgings for General Engineering Purposes, Part 3: Alloy Special Steels4140, 4340Current
EN 10297-1Seamless Circular Steel Tubes for Mechanical and General Engineering Purposes, Part 1: Non-Alloy and Alloy Steel Tubes4130, 4140Current
JIS G3441Alloy Steel Tubes for Machine Structural Purposes4130Current
JIS G4052Structural Steels with Specified Hardenability Bands (H Steels)4140, 4340Current
JIS G4053Alloy Steels for Machine Structural Use4130, 4135, 4140, 4340, 8620Current
JIS G4103Nickel Chromium Molybdenum Steels4340, 8620Current
JIS G4105Chromium Molybdenum Steels4130, 4140Current
MIL-C-47041Castings, Steel, Investment Maraging, 18 Percent NickelMaraging 250Cancelled 1980
MIL-DTL-15119Tubing, Round, Seamless Alloy SteelCurrent
MIL-DTL-16216Steel Plate, Alloy, Structural, High Yield Strength (HY-80 and HY-100)HY-80, HY-100To confirm
MIL-DTL-16598Steel Bar (Low Expansion, Free Cutting, 36 Percent Nickel)Inactive for new design 2026
MIL-DTL-23194Steel, Forgings, Carbon and Low Alloy (UNS K13502, K12766 and K42365)Current
MIL-DTL-24093Steel Forgings, Carbon and Alloy Heat -TreatedHY-80Current
MIL-DTL-24128Low Carbon Chromium Steel Bars and ForgingsCurrent
MIL-DTL-24528Steel Bars and Forgings, Nickel-Chromium-Molybdenum (UNS G43406) and Chromium-Molybdenum-Vanadium (UNS K14675)Current
MIL-F-24669/4Forgings and Forging Stock, Steel Bars and Billets, Nickel and Nickel-Molybdenum Modified Hadfield; Low MagnetCancelled 1996
MIL-N-3182Nickel-Molybdenum Alloy Steel Forgings and BarsCancelled 1950
MIL-S-869Steel Bars, Billets and Forgings - Alloy Nitriding ApplicationCancelled 1986DOD-F-24669/3
MIL-S-871Steel Plate, Carbon-Molybdenum Alloy and Manganese-Molybdenum Alloy, Hot Rolled (naCancelled 1956
MIL-S-872Steel Bar, Billet, and Forgings Carbon Molybdenum AlloyCancelled 1986
MIL-S-5000Steel, Chrome-Nickel-Molybdenum (E4340) Bars and Reforging Stock (Aircraft Quality)4340Cancelled 2000 (still common)AMS-S-5000
MIL-S-5626Steel, Chrome-Molybdenum (4140) Bars, Rods and Reforging Stock (Aircraft Quality)4140Cancelled 1995 (still common)AMS 6382
MIL-S-6049Steel, Chrome-Nickel-Molybdenum (8740) Bars and Reforging Stock (Aircraft Quality)8740Cancelled 2002 (still common)AMS 6322, AMS 6325, AMS 6327
MIL-S-6050Steel, Chrome-Nickel-Molybdenum (8630) Bars and Reforging Stock (Aircraft Quality)8630Cancelled 2024 (still common)AMS-S-6050, AMS 6280
MIL-S-6098Steel, Chrome-Nickel-Molybdenum (8735) Bars and Reforging Stock (aircraft)8735Cancelled 1999AMS-S-6098
MIL-S-6709Steel, Chrome-Molybdenum-Aluminum; Bars, Rods, Billets and Forging Stock (for Nitriding) (aircraft Quality)Cancelled 2002AMS 6470, AMS 6472
MIL-S-6758Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock (Aircraft Quality)4130Cancelled 1998 (still common)AMS-S-6758
MIL-S-7108Steel, Alloy (manganese-Silicon-Nickel), Bars and Forging Stock (aircraft Quality) (ASG)Cancelled 1997AMS 6425
MIL-S-7393Steel, Chrome-Nickel (3310, 3316, 9310) Alloy Carburizing Bars and Billets (Aircraft Quality)9310, 3310, 3316Cancelled 2025AMS 6260, AMS 6265
MIL-S-7420Steel Bars, Alloy, Chromium, High Carbon E52100 (aircraft Quality)52100Cancelled 2002AMS 6440, AMS 6444, AMS 6447
MIL-S-7493Steel Bars, Alloy, Carburizing, 4615, 4617, & 4620, Aircraft, QualityCancelled 1984AMS 6290, AMS 6292, AMS 6294
MIL-S-7809Steel, High-Strength, Low-Alloy, Bars, Shapes, Sheet, Strip, and PlateCancelled 1976
MIL-S-8142Steel Bars, Rods and Forgings, Medium Carbon, High Chromium (see Qq-S-763)Cancelled 1953
MIL-S-8232Steel Alloy, Bars, Low Carbon, High Nickel,Cancelled 1953
MIL-S-8503Steel, Chrome-Vanadium (6150) Bars (Aircraft Quality)6150Cancelled 1997AMS 6448
MIL-S-8690Steel, Chrome-Nickel-Molybdenum (8620) Bars (Aircraft Quality)8620Cancelled 1997AMS 6274
MIL-S-8695Steel, Bars and Wire, Molybdenum (4037) (aircraft Quality) (ASG)4037Cancelled 1955
MIL-S-8696Steel, Wire, Chrome-Vanadium, 6150 (aircraft Quality) (ASG)Cancelled 1954
MIL-S-8699Steel Bars and Forging Stock (4330) Vanadium Modified, Aircraft Quality4330Cancelled 1993AMS 6411, AMS 6427
MIL-S-8707Steel Bars and Forging Stock, Chrome-Nickel-Molybdenum, 9840 Aircraft QualityCancelled 1968
MIL-S-8844Steel, Chrome-Nickel-Molybdenum-Vanadium (D6AC) Bars, Forgings, Sheet, Plate and TubingD6ACCancelled 1994AMS 6414, AMS 6257
MIL-S-8949Steel Bars, Plates, Sheets, Billets, and Reforging Stock Type D6ACD6ACCancelled 1994
MIL-S-12505Steel: Structural, High-Strength, Low-Alloy, Shapes, Plates, and Bars for Welded, Riveted, and Bolted StructurCancelled 2018
MIL-S-15073Steel, Alloy (chromium and Nickel Chromium), Bars, Forgings and Finished PiecesCancelled 1952
MIL-S-16216Steel Plate, Alloy, Structural, High Yield Strength (HY-80 and HY-100)HY-80, HY-100Cancelled 2013 (still common)MIL-DTL-16216
MIL-S-16538Steel, Alloy, Forgings (for Special High Temperature Applications)Cancelled 1952
MIL-S-16900Steel, Alloy, Forgings (for Torpedo Air Flasks, Heads and Midship Shells)Cancelled 1951
MIL-S-17758Steel Bar and Steel Forging, Nickel Modified Hadfield and Nickel-Molybdenum Modified HadfieldCancelled 1986
MIL-S-17759Steel Bar, Billet, Forging and Wire Chromium Nickel Phosphorus and Chromium.nickel Manganese Phosphorus Alloy,Cancelled 1986
MIL-S-17919Steel Strip and Flat Bar, Carbon and Alloy (for Springs) (navy)Cancelled 1954
MIL-S-18410Steel Bars, Billets, and Forgings----Chromium-Molybdenum Alloy (s/s/ by Dod-F-24669/2)Cancelled 1986
MIL-S-18728Steel, Alloy 8630, Plate, Sheet and Strip8630Cancelled 1997AMS 6350
MIL-S-18729Steel, Alloy 4130, Plate, Sheet and Strip4130Cancelled 1997 (still common)AMS 6350
MIL-S-18731Steel, Alloy, Sheet & Strip, (6150), Aircraft Quality (See AMS6455)6150Cancelled 1982
MIL-S-18733Steel Plate, Sheet, & Strip, Alloy (4135), Aircraft Quality (see Ams 6352)4135Cancelled 1956
MIL-S-19315Steel Plate, Alloy, Structural and Protective ApplicationCancelled 1956
MIL-S-19795Steel Plate, Alloy, Structural, High Yield Strength, General PurposeCancelled 1957
MIL-S-20147Steel, Nickel, PlateCancelled 1960
MIL-S-21515Steel Bars, Plates, Sheets and Strips, 4335, Modified Vacuum Melted (ASG)Cancelled 1981AMS 6429
MIL-S-21952Steel (HY-80 and HY-100) Alloy BarsHY-80, HY-100Cancelled 2013
MIL-S-22494Steel Forgings, Carbon and Low Alloy, for Pressure Vessels, Nuclear Plant ServiceCancelled 1960
MIL-S-22664Steel, Structural Shapes Alloy, High Yield Strength (HY-80 and HY-100) (Metric)HY-80, HY-100Cancelled 2013
MIL-S-22958Steel, Alloy, Shapes, Hot-Rolled Structural (HY-80 and HY-100)HY-80, HY-100Cancelled 1980
MIL-S-23008Steel Castings, Alloy, High Yield Strength (HY-80 and HY-100)HY-80, HY-100Cancelled 2013
MIL-S-23009Steel Forgings, Alloy, High Yield Strength (HY-80 and HY-100)HY-80, HY-100Cancelled 2013
MIL-S-23966Steel Bar, Billets and Forgings, Alloy Nitriding ApplicationCancelled 1964MIL-S-869
MIL-S-24238Steel Plate Carbon and Low AlloyCurrent
MIL-S-24371Steel Plate, Alloy, Structural, High Yield Strength (HY-130)HY-130Cancelled 2013
MIL-S-24502Steel, Choromium- Molybdenum-Vanadium BarsInactive for new design 2023
MIL-S-24512Steel Forgings, Alloy, Structural, High Yield Strength (HY-130)HY-130Cancelled 2013
MIL-S-46033Steel Bars, Carbon and Alloy, Round, Sqware, and Flat (for Springs)Cancelled 1975
MIL-S-46053Steel, Forgings, Leaded AlloyCancelled 1979
MIL-S-46054Steel, Billets and Bars, Leaded Alloy, ReforgingCancelled 1962
MIL-S-46055Steel, Sheet & Strip, Low Carbon ChromizedCancelled 1981
MIL-S-46128Steel, Alloy, Bars (v-Modified 4330) for Critical ApplicationCancelled 1997
MIL-S-46188Steel Plate, Wrought, Homogeneous Electroslag Remelt (ESR) (4340 Alloy4340Cancelled 1997
MIL-S-46850Steel, Maraging 18 Percent Nickel: Sheet, Strip, Forgings and ExtrusionsMaraging 250, Maraging 300Cancelled 2024
MIL-S-47139Steel, Bar, Plate, Sheet, Strip, Forgings, and Extrusions, Maraging, 18 Percent NickelMaraging 250Cancelled 1981
MIL-S-47319Steel, Bar, Billet and Forgings Cobalt-Free MaragingMaraging 250Inactive for new design 2014
MIL-S-81054Steel, Bars and Forgings, Chromium-Nickel-Molybdenum-Vanadium (for Torpedo MK 46 Mod 0)Inactive for new design 2021
MIL-S-81081Steel, Sheet, Chromium - Nickel - Molybdenum - Vanadium (for Torpedo Mk 46 Mod 0)Cancelled 1986
MIL-S-81242Steel, Chrome Molybdenum (4130 or 8630) Bars & Reforging Stock (aircraft, Quality, Vacuum Degassed) (see Ams 6Cancelled 1965
MIL-S-81378Steel Bars, Plates, and Reforging Stock Low Alloy, High QualityCancelled 1966
MIL-S-83030Steel Alloy, Carburizing, Bars and Billets, Steel Nickel-Chromium (3310, 3316, and 9310), Premium Quality (SeeCancelled 2006
MIL-S-83135Steel Bars, Reforging Stock, and Mechanical Tubing, 4340M, High QualityCancelled 2006
MIL-T-6731Tubing, Chrome-Molybdenum (4130) Steel Welded4130Cancelled 1951MIL-T-6736
MIL-T-6732Tubing, Steel, Chrome-Nickel-Molybdenum (8630), Seamless (Aircraft Quality)8630Cancelled 2003AMS-T-6736
MIL-T-6734Tubing, Chrome Nickel Molybdenum (8630) Steel Welded8630Cancelled 1980MIL-T-6736
MIL-T-6735Tubing, Steel, Chrome-Molybdenum (4135), Welded (Aircraft Quality)4135Cancelled 1998AMS-T-6735
MIL-T-6736Tubing, Steel, Chrome-Molybdenum (4130 and 8630), Seamless and Welded (Aircraft Quality)4130, 8630Cancelled 1998 (still common)AMS-T-6736
MIL-T-16690Tubing, Steel, (8640, 8740, 4135 or 4140) Seamless, Mechanical8640Cancelled 1967ASTM A519
MIL-T-18165Tube & Pipe, Chromium-Molybdenum Alloy Steel, Seamless (future Acquisition Use Mil-P-24691/2)Cancelled 1987MIL-P-24691/2
MIL-T-20155Tube and Pipe, Carbon-Molybdenum Alloy Steel, Seamless (ASTM A-335-55r, Grade P-1)Cancelled 1997
MIL-W-16632Wire, Steel, Spring (chromium-Silicon)Cancelled 1952
QQ-S-624Steel Bars, Alloy, Hot-Rolled and Cold-Finished4130, 4140, 4340, 8620, 52100Cancelled 1974ASTM A29, ASTM A322, ASTM A331
QQ-S-626Steel Plate, Alloy (Structural Quality)Cancelled 1991ASTM A829
QQ-S-627Steel, Alloy, Sheet and Strip, Hot-RolledCancelled 1974
QQ-S-629Steel, Alloy; Tubing Mechanical, Round: Seamless and WeldedCancelled 1963OO-T-825
QQ-S-671Steel; Carbon and Alloy, BarsCancelled 1950
QQ-S-691Steel Plate, Carbon-Silicon, Carbon Molybdenum and Manganese-Molybdenum Alloys Hot Rolled, (Marine Boiler QualCancelled 1974ASTM A515, ASTM A516, ASTM A204, ASTM A306
QQ-W-405Wire, Steel, Carbon and Alloy (for Cold Heading and Cold Forging)Cancelled 1975ASTM A545
QQ-W-412Wire, Steel, Alloy (General Purpose Quality), for Mechanical SpringsCancelled 1977
Steel, tool and die: 15 specs
SpecTitleAlloysStatusReplaced by
AMS 5626Tool Steel Bars, High Speed (T1)T1To confirm
AMS 6490Steel Bars Forgings and Tubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum MeltedM50Likely current
AMS 6491Steel Bars Forgings and Tubing 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications Double Vacuum MeltedM50Likely current
ASTM A597Cast Tool SteelCA-2, CD-5, CS-5, CM-2, CH-12Current
ASTM A600Tool Steel High SpeedM1, M2, M3 Class 1, M3 Class 2, M4, M7, M10, M35 …Current
ASTM A681Tool Steels AlloyO1, O2, O6, O7, A2, A6, A10, A7 …Current
ASTM A686Tool Steel, CarbonW1, W2, W5Current
EN ISO 4957Tool steelsX153CrMoV12, X210Cr12, X40CrMoV5-1, 105WCr6, C80U, HS6-5-2C, HS6-5-2-5Current
JIS G4401Carbon tool steelsSK85, SK105Current
JIS G4403High speed tool steelsSKH51, SKH2, SKH55, SKH59Current
JIS G4404Alloy tool steelsSKD11, SKD61, SKS3, SKT4, SKD1Current
MIL-S-5696Steel, Alloy, Bar and Rod, for Dies and Special ToolsCancelled 1960
QQ-T-570Tool Steel, Hot-Work (federal)H11, H13, H21CancelledASTM A681
QQ-T-580Tool Steel, High-Speed (federal)M2, M4, M42, T1, T15CancelledASTM A600
QQ-T-590Tool Steel, Carbon (federal)W1, W2CancelledASTM A686
Steel, cast: 45 specs
SpecTitleAlloysStatusReplaced by
ASME SA-216Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature ServiceWCA, WCB, WCCCurrent
ASME SA-217Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature ServiceWC6, WC9, C5, C12Current
ASME SA-352Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature ServiceLCB, LCC, LC2Current
ASME SA-356Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled, for Steam TurbinesA356 Gr 1Current
ASME SA-487Steel Castings Suitable for Pressure ServiceA487 Class 1N, A487 Class 2Q, A487 Class 4QCurrent
ASME SA-703Steel Castings, General Requirements, for Pressure-Containing PartsCurrent
ASTM A27Steel Castings, Carbon, for General ApplicationA27 Gr 60-30, A27 Gr 65-35, A27 Gr 70-36, A27 Gr 70-40Current
ASTM A128Steel Castings, Austenitic ManganeseA128 Gr A, A128 Gr B-2, A128 Gr C, A128 Gr E-1Current
ASTM A148Steel Castings, High Strength, for Structural PurposesA148 Gr 80-40, A148 Gr 80-50, A148 Gr 90-60, A148 Gr 105-85, A148 Gr 115-95, A148 Gr 130-115, A148 Gr 135-125, A148 Gr 150-135 …Current
ASTM A216Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature ServiceWCA, WCB, WCCCurrent
ASTM A352Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature ServiceLCA, LCB, LCC, LC1, LC2, LC2-1, LC3, LC4 …Current
ASTM A356Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam TurbinesA356 Gr 1, A356 Gr 2, A356 Gr 5, A356 Gr 6, A356 Gr 8, A356 Gr 9, A356 Gr 10Current
ASTM A389Steel Castings, Alloy, Specially Heat Treated, for Pressure-Containing Parts, Suitable for High-Temperature ServiceC23, C24Current
ASTM A426Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature ServiceCP5, CP9, CP11, CP12, CP22Current
ASTM A486Steel Castings for Highway BridgesA486 Class 70, A486 Class 90, A486 Class 120Current
ASTM A703Steel Castings, General Requirements, for Pressure-Containing PartsCurrent
ASTM A732Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated TemperaturesA732 Gr 1N, A732 Gr 1Q, A732 Gr 2N, A732 Gr 2Q, A732 Gr 3N, A732 Gr 3Q, A732 Gr 4N, A732 Gr 4Q …Current
ASTM A757Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature ServiceA757 Gr A1Q, A757 Gr A2Q, A757 Gr B2N, A757 Gr B3N, A757 Gr B4N, A757 Gr C1Q, A757 Gr D1Q, A757 Gr E1Q …Current
ASTM A781Castings, Steel and Alloy, Common Requirements, for General Industrial UseCurrent
ASTM A915Steel Castings, Carbon, Alloy, and Martensitic Stainless Chemical Requirements Similar to Standard Wrought GradesSC 1030, SC 4130, SC 4140, SC 8630CurrentASTM A958
ASTM A957Investment Castings, Steel and Alloy, Common Requirements, for General Industrial UseCurrent
ASTM A958Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought GradesSC 1020, SC 1030, SC 1045, SC 4130, SC 4140, SC 4340, SC 8630Current
EN 10213Steel castings for pressure purposesGP240GH, G17CrMo5-5, G17CrMo9-10, G20Mn5Current
EN 10293Steel castings for general engineering usesGP240GH, G17CrMo5-5, G20Mo5, GE240Current
JIS G5101Carbon steel castingsSC360, SC410, SC450, SC480Current
JIS G5151Steel castings for high temperature and high pressure serviceSCPH2, SCPH11, SCPH21Current
MIL-C-24707Castings, Ferrous, for Machinery and Equipment ApplicationTo confirm
MIL-C-24707/6Castings, Ferrous, Chromium Steel, for Pressure-Containing Parts Suitable for High-Temperature ServiceCurrent
MIL-R-10029Ring, Breech, Steel Castings forCancelled 1963
MIL-S-870Steel Casting, Molybdenum AlloyCancelled 1989MIL-C-24707/2
MIL-S-870B(I2)Steel Castings, Molybdenum AlloyCancelled 1989MIL-C-24707/2
MIL-S-6014Steel, Alloy (special), Castings (aircraft Use).Cancelled 1955
MIL-S-10026Steel Castings (centrifugal) for Gun Tubes.Cancelled 1961
MIL-S-11988Steel Forgings and Castings for Recoil and Recuperator CylindersCancelled 1954
MIL-S-15083Steel CastingsCancelled 1989MIL-C-24707/1, ASTM A757, ASTM A216, ASTM A487
MIL-S-15464Steel Alloy, Chromium-Molybdenum; CastingsCancelled 1989MIL-C-24707/2, ASTM A217, ASTM A389
MIL-S-16993Steel Castings (12-Percent Chromium)Cancelled 1989MIL-C-24707/6
MIL-S-16993A(I2)Steel Castings (12-Percent Chromium)Cancelled 1989MIL-C-24707/6
MIL-S-17249Steel Castings, Hadfield Manganese (low Magnetic Permeability)Cancelled 1989MIL-C-24707/4, ASTM A128
MIL-S-17509Steel Castings, Austenitic, Chromium-Nickel, Low Magnetic PermeabilityCancelled 1989MIL-C-24707/3, ASTM A744
MIL-S-22141Steel Castings (confirm exact title on ASSIST)Inactive for new design 2021
MIL-S-22146Steel, Carbon, Investment CastingsCancelled 1962MIL-S-22141
MIL-S-46052Steel Castings (confirm exact title on ASSIST)Cancelled 1983
QQ-S-681Steel CastingsCancelled 1985ASTM A27, ASTM A148
SAE J435Automotive Steel CastingsTo confirm
Iron, cast: 55 specs
SpecTitleAlloysStatusReplaced by
AMS 5315Ductile (Nodular) Iron Castings, Sand 60000 psi (415 MPa) Tensile Strength Ferritize AnnealedLikely current
AMS 5316Ductile (Nodular) Iron Castings, Sand 80,000 psi (550 MPa) Tensile Strength As CastLikely current
AMS 5395Alloy Iron Castings, Ductile, Sand, Corrosion Resistant 22NI (2.5 - 3.0C) as CastCurrent
AMS 7310Rings, Piston, Cast Iron As CastLikely current
ASME SA-278Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 F (350 C)Gray iron Class 30, Gray iron Class 40Current
ASME SA-395Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated TemperaturesDuctile iron 60-40-18Current
ASTM A47Ferritic Malleable Iron CastingsMalleable iron 32510, Malleable iron 35018Current
ASTM A48Gray Iron CastingsGray iron Class 20, Gray iron Class 25, Gray iron Class 30, Gray iron Class 35, Gray iron Class 40, Gray iron Class 45, Gray iron Class 50, Gray iron Class 55 …Current
ASTM A74Cast Iron Soil Pipe and FittingsCast iron soil pipeCurrent
ASTM A126Gray Iron Castings for Valves, Flanges, and Pipe FittingsA126 Class A, A126 Class B, A126 Class CCurrent
ASTM A159Automotive Gray Iron CastingsG1800, G2500, G3000, G3500, G4000Current
ASTM A197Cupola Malleable IronCupola malleable ironCurrent
ASTM A220Pearlitic Malleable IronMalleable iron 40010, Malleable iron 45008, Malleable iron 45006, Malleable iron 50005, Malleable iron 60004, Malleable iron 70003, Malleable iron 80002, Malleable iron 90001Current
ASTM A278Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 °F [350 °C]Gray iron Class 20, Gray iron Class 25, Gray iron Class 30, Gray iron Class 35, Gray iron Class 40, Gray iron Class 45, Gray iron Class 50, Gray iron Class 55 …Current
ASTM A319Gray Iron Castings for Elevated Temperatures for Non-Pressure-Containing PartsA319 Class I, A319 Class II, A319 Class IIICurrent
ASTM A395Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated TemperaturesDuctile iron 60-40-18Current
ASTM A436Austenitic Gray Iron CastingsA436 Type 1, A436 Type 1b, A436 Type 2, A436 Type 2b, A436 Type 3, A436 Type 4, A436 Type 5, A436 Type 6Current
ASTM A439Austenitic Ductile Iron CastingsD-2, D-2B, D-2C, D-3, D-3A, D-4, D-5, D-5B …Current
ASTM A476Ductile Iron Castings for Paper Mill Dryer RollsDuctile iron 80-60-03Current
ASTM A518Corrosion-Resistant High-Silicon Iron CastingsA518 Grade 1, A518 Grade 2, A518 Grade 3Current
ASTM A532Abrasion-Resistant Cast IronsA532 Class I Type A, A532 Class I Type D, A532 Class II Type B, A532 Class III Type ACurrent
ASTM A536Ductile Iron CastingsDuctile iron 60-40-18, Ductile iron 65-45-12, Ductile iron 80-55-06, Ductile iron 100-70-03, Ductile iron 120-90-02Current
ASTM A571Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature ServiceD-2M Class 1, D-2M Class 2Current
ASTM A602Automotive Malleable Iron CastingsM3210, M4504, M5003, M5503, M7002, M8501Current
ASTM A834Common Requirements for Iron Castings for General Industrial UseCurrent
ASTM A842Compacted Graphite Iron CastingsCGI Grade 250, CGI Grade 300, CGI Grade 350, CGI Grade 400, CGI Grade 450Current
ASTM A874Ferritic Ductile Iron Castings Suitable for Low-Temperature ServiceDuctile iron 60-40-18Current
ASTM A888Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping ApplicationsCast iron soil pipeCurrent
ASTM A897Austempered Ductile Iron CastingsADI 750-500-11, ADI 900-650-09, ADI 1050-750-07, ADI 1200-850-04, ADI 1400-1100-02, ADI 1600-1300-01Current
EN 1561Founding: Grey cast ironsEN-GJL-200, EN-GJL-250, EN-GJL-300, EN-GJL-350Current
EN 1562Founding: Malleable cast ironsEN-GJMB-350-10, EN-GJMW-400-5Current
EN 1563Founding: Spheroidal graphite cast ironsEN-GJS-400-15, EN-GJS-450-10, EN-GJS-500-7, EN-GJS-600-3, EN-GJS-700-2Current
EN 1564Founding: Austempered ductile cast ironsEN-GJS-800-8, EN-GJS-1400-1Current
ISO 185Grey cast irons - ClassificationISO 185/JLCurrent
ISO 1083Spheroidal graphite cast irons - ClassificationISO 1083/JS/400-15, ISO 1083/JS/500-7Current
JIS G5501Gray iron castingsFC100, FC150, FC200, FC250, FC300, FC350Current
JIS G5502Spheroidal graphite iron castingsFCD400, FCD450, FCD500, FCD600, FCD700Current
JIS G5705Malleable iron castingsFCMB, FCMWCurrent
MIL-B-18897Boilers, Steam and Hot Water, Watertube (Straight Bare and Finned Tube) Cast Iron and Firebox, Packaged Type (Cancelled 2003
MIL-C-24707/5Castings, Ductile Iron and Austenitic IronCurrent
MIL-G-858Gray Iron Alloy Castings, (Scale Resisting) Use ASTM A319 or ASTM A436(Cancelled 1969
MIL-I-11444Iron, Malleable, Pearlitic, CastingsCancelled 1977ASTM A220
MIL-I-11466Iron Castings, Malleable and Pearlitic Malleable (confirm title on ASSIST)Cancelled 1978ASTM A536
MIL-I-17166Iron Castings, Nodular Graphic (Ductile Iron)(for Shipboard Applications)Cancelled 1954MIL-I-24137
MIL-I-18397Iron Castings, Nodular Graphitic, Corrosion Resisting, Austenitic, Low Magnetic Permeability, Navy ShipboardCancelled 1955MIL-I-24137
MIL-I-22243Iron Casting, Spheroidal Graphite (Extra Tough)Cancelled 1972
MIL-I-24137Iron Castings, Ductile (Naval) (confirm title on ASSIST)Ductile iron 60-40-18Cancelled 1989MIL-C-24707/5
MIL-I-24811Iron Castings (confirm title on ASSIST)To confirm
MIL-I-46182Iron Castings, Spheroidal Graphite (Extra Tough)Inactive for new design 2014
QQ-I-652Iron Castings, GrayCancelled 1977ASTM A48
QQ-I-653Iron Casting, Gray, AutomotiveCancelled 1969
QQ-I-666Iron Castings, MalleableCancelled 1977ASTM A47, ASTM A220
QQ-I-671Iron Castings, Ductile (confirm title on ASSIST)CancelledASTM A536
SAE J431Automotive Gray Iron CastingsG1800, G2500, G3000, G3500, G4000Current
SAE J434Automotive Ductile (Nodular) Iron CastingsD4018, D4512, D5506, D7003Current
Titanium: 159 specs
SpecTitleAlloysStatusReplaced by
A-A-56024Foil, TitaniumCurrent
AMS 2241Steel, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire, TolerancesCurrent
AMS 2242Tolerances Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and PlatCurrent
AMS 2368Titanium, Wrought, Raw Material Except Forgings and Forgings and Forging Stock, Sampling and Testing ofCurrent
AMS 4895Titanium Alloy, Round Bars 5Al - 1Fe AnnealedLikely current
AMS 4897Titanium Alloy, Sheet and Strip 15Mo - 3.0AI - 2.8Cb - 0.20SiLikely current
AMS 4898Titanium Alloy, Sheet, 6Al - 2Sn - 2Zr - 2Mo - 2Cr - 0.15Si, AnnealedLikely current
AMS 4899Titanium Alloy, Sheet, Strip, and Plate 4.5AI - 3V - 2Fe - 2Mo AnnealedTi-4.5Al-3V-2Fe-2MoLikely current
AMS 4900Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55 ksi (379 MPa) Yield StrengthCP Ti Grade 3Likely current
AMS 4901Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa)CP Ti Grade 4Likely current
AMS 4902Titanium Sheet, Strip, and Plate Commercially Pure Annealed 40.0 ksi (276 MPa) Yield StrengthCP Ti Grade 2Likely current
AMS 4903Titanium Alloy Sheet Strip and Plate 6Al - 4V Solution Heat TreatedTi-6Al-4VLikely current
AMS 4904Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated and AgedTi-6Al-4VLikely current
AMS 4905Titanium Alloy, Damage-Tolerant Grade Plate 6Al - 4V, Extra Low Interstitial (ELI) Beta AnnealedTi-6Al-4V ELILikely current
AMS 4907Titanium Alloy, Sheet, Strip, and Plate 6.0Al - 4.0V, Extra Low Interstitial AnnealedTi-6Al-4V ELILikely current
AMS 4908Titanium Alloy, Sheet and Strip 8Mn Annealed, 110 Ksi (758 Mpa) Yield StrengthTi-8MnCancelled 2003
AMS 4909Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn, Extra Low Interstitial AnnealedTi-5Al-2.5Sn ELILikely current
AMS 4910Titanium Alloy Sheet, Strip, and Plate, 5Al-2.5Sn, AnnealedTi-5Al-2.5SnCurrent
AMS 4911Titanium Alloy, Sheet, Strep, and Plate 6AL-4V AnnealedTi-6Al-4VCurrent
AMS 4914Titanium Alloy, Cold Rolled Sheet and Strip 15V - 3Al - 3Cr - 3Sn Solution Heat TreatedTi-15V-3Cr-3Sn-3AlLikely current
AMS 4915Titanium Alloy Sheet, Strip, and Plate 8Al - 1V - 1Mo Single AnnealedTi-8Al-1Mo-1VLikely current
AMS 4916Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex AnnealedTi-8Al-1Mo-1VLikely current
AMS 4917Titanium Alloy Sheet, Strip, and Plate 13.5V - 11Cr - 3.0Al Solution Heat TreatedTi-13V-11Cr-3AlLikely current
AMS 4918Titanium Alloy, Sheet, Strip, and Plate 6Al - 6V - 2Sn AnnealedTi-6Al-6V-2SnLikely current
AMS 4919Titanium Alloy Sheet Strip and Plate 6AI - 2Sn - 4Zr - 2Mo - 0.08Si Duplex AnnealedTi-6Al-2Sn-4Zr-2MoLikely current
AMS 4920Titanium Alloy Forgings, 6Al-4V, AnnealedTi-6Al-4VCurrent
AMS 4921Titanium Bars, Wire, Forgings, And Rings Commercially Pure 70 Ksi (483 Mpa) Yield StrengthCP Ti Grade 4Current
AMS 4922Titanium Alloy, Seamless, Hydraulic Tubing 15V - 3.0Cr - 3.0Al - 3.0Sn Cold Worked and Precipitation Heat TreatedTi-15V-3Cr-3Sn-3AlLikely current
AMS 4924Titanium Alloy Bars, Forgings, and Rings 5Al - 2.5Sn, Extra Low Interstitial AnnealedTi-5Al-2.5Sn ELILikely current
AMS 4926Titanium Alloy, Bars, Wire, and Rings 5A1 - 2.5SN, Annealed, 110 KSI (758 MPA) Yield StrengthTi-5Al-2.5SnCurrent
AMS 4928Titanium Alloy Bars, Wire, Forgings, And Rings 6al - 4v AnnealedTi-6Al-4VCurrent
AMS 4930Titanium Alloy Bars, Wire, Forgings, and Rings 6A1 - 4V, Extra Low Interstitial, AnnealedTi-6Al-4V ELICurrent
AMS 4931Bars, Titanium Alloy, Forgings, and Rings, 6A1 - 4V, Extra Low Interstitial (ELI), Duplex Annealed, Fracture TCurrent
AMS 4932Titanium Alloy Sheet 6Al - 4V Driver Sheet (Composition similar to UNS R56400)Ti-6Al-4VLikely current
AMS 4933Titanium Alloy Extrusions and Flash Welded Rings 8Al - 1Mo - 1V Solution Heat Treated and StabilizedTi-8Al-1Mo-1VLikely current
AMS 4934Titanium Alloy Extrusions and Flash Welded Rings 6Al - 4V Solution Heat Treated and AgedTi-6Al-4VLikely current
AMS 4935Titanium Alloy Extrusions and Flash Welded Rings 6Al - 4V Annealed Beta ProcessedTi-6Al-4VCurrent
AMS 4937Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 6V - 2Sn Beta Extruded Plus Annealed, Heat TreatableTi-6Al-6V-2SnLikely current
AMS 4938Forgings Titanium Alloys Heat-Treated Finished-Part Properties: Short-Traverse Tensile Fracture Toughness and Longitudinal Time-Dependent-TensionLikely current
AMS 4939Titanium Alloy Sheet, Strip, and Plate 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat TreatedTi-3Al-8V-6Cr-4Mo-4Zr (Beta C)Likely current
AMS 4940Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield StrengthCP Ti Grade 1Likely current
AMS 4941Titanium Tubing, Welded Annealed, 40 KSI (276 MPA) Yield StrengthCP Ti Grade 2Current
AMS 4942Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield StrengthCP Ti Grade 2Current
AMS 4943Titanium Alloy, Seamless Hydraulic Tubing 3.0AL-2.5V AnnealedTi-3Al-2.5VCurrent
AMS 4944Titanium Alloy, Seamless, Hydraulic Tubing 3.0al - 2.5v Cold Worked, Stress RelievedTi-3Al-2.5VCurrent
AMS 4945Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved 2020 AMS 0 1161 AMS4946F Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Texture Controlled Cold Worked, Stress RelievedTi-3Al-2.5VLikely current
AMS 4948Titanium Alloy, Hot Rolled Sheet and Strip 5Al - 1Fe AnnealedLikely current
AMS 4950Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged Modified StrengthLikely current
AMS 4957Titanium Alloy Round Bar and Wire 3AI - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Cold DrawnTi-3Al-8V-6Cr-4Mo-4Zr (Beta C)Likely current
AMS 4959Titanium Alloy Wire 13.5V - 11CR - 3A1 Spring TemperCurrent
AMS 4962Titanium Alloy, Investment Castings 6Al - 4V Hot Isostatically PressedTi-6Al-4VLikely current
AMS 4963Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable, Modified StrengthTi-6Al-4VLikely current
AMS 4964Titanium Alloy Bars Wire Forgings and Rings 4.5Al - 3V - 2Fe - 2Mo AnnealedTi-4.5Al-3V-2Fe-2MoLikely current
AMS 4965Titanium Alloy Bars, Wire, Forgings, and Rings, 6Al-4V, Solution Heat Treated and AgedTi-6Al-4VCurrent
AMS 4966Titanium Alloy Forgings 5AL - 2.5SN Annealed, 110 KSI (758 MPA) Yield StrengthTi-5Al-2.5SnCurrent
AMS 4967Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat TreatableTi-6Al-4VLikely current
AMS 4970Titanium Alloy Bars, Wire, and Forgings 7Al - 4Mo Solution and Precipitation Heat TreatedLikely current
AMS 4971Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed, Heat TreatableTi-6Al-6V-2SnLikely current
AMS 4972Titanium Alloy Bars Wire and Rings 8Al - 1Mo - 1V Solution Heat Treated and StabilizedTi-8Al-1Mo-1VLikely current
AMS 4973Titanium Alloy Forgings 8Al - 1Mo - 1V Solution Heat Treated and StabilizedTi-8Al-1Mo-1VLikely current
AMS 4975Titanium Alloy, Bars, Wire, and Rings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 0.08Si Solution and Precipitation Heat TreatedTi-6Al-2Sn-4Zr-2MoLikely current
AMS 4976Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 08Si Solution and Precipitation Heat TreatedTi-6Al-2Sn-4Zr-2MoLikely current
AMS 4978Titanium Alloy Bars, Wire, Forgings, and Rings, 6AL - 6V - 2SN AnnealedTi-6Al-6V-2SnCurrent
AMS 4979Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Solution and Precipitation Heat TreatedTi-6Al-6V-2SnLikely current
AMS 4981Titanium Alloy Bars, Wire, and Forgings 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution and Precipitation Heat TreatedTi-6Al-2Sn-4Zr-6MoLikely current
AMS 4982Titanium Alloy Wire 44.5 CbCurrent
AMS 4983Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Aged 180 ksi (1241 MPa) Tensile StrengthTi-10V-2Fe-3AlLikely current
AMS 4984Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173 ksi (1193 MPa) Tensile StrengthTi-10V-2Fe-3AlLikely current
AMS 4985Titanium Alloy, Investment Castings 6Al - 4V 130 UTS, 120 YS, 6% EL Hot Isostatically Pressed Anneal Optional or When SpecifiedTi-6Al-4VLikely current
AMS 4986Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 160 ksi (1103 MPa) Tensile StrengthTi-10V-2Fe-3AlLikely current
AMS 4988Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat TreatedTi-6Al-6V-2SnLikely current
AMS 4989Titanium Alloy Sheet, Strip, and Plate 3Al - 2.5V AnnealedTi-3Al-2.5VLikely current
AMS 4990Titanium Alloy Sheet Strip and Plate 6Al - 6V - 2Sn Solution Heat Treated and AgedTi-6Al-6V-2SnLikely current
AMS 4991Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal OptionalTi-6Al-4VLikely current
AMS 4992Casting, Structural Investment, Titanium Alloy 6Al - 4V Hot Isostatically PressedTi-6Al-4VLikely current
AMS 4995Titanium Alloy Forgings, 5Al-2Sn-2Zr-4Mo-4Cr (Ti-17)Ti-5Al-2Sn-2Zr-4Mo-4CrTo confirm
AMS 6900Titanium Alloy Bars Forgings and Forging Stock 5Al - 2.5Sn AnnealedTi-5Al-2.5SnLikely current
AMS 6901Titanium Alloy Bars Forgings and Forging Stock 5Al - 2.5Sn Extra Low Interstitial AnnealedTi-5Al-2.5Sn ELILikely current
AMS 6905Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Duplex AnnealedTi-6Al-2Sn-4Zr-2MoLikely current
AMS 6906Titanium Alloy Bars Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution Heat Treated and AgedTi-6Al-2Sn-4Zr-6MoLikely current
AMS 6907Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Duplex AnnealedTi-6Al-2Sn-4Zr-6MoLikely current
AMS 6910Titanium Alloy Bars, Forgings and Forging Stock, 8Al - 1Mo - 1V, Duplex AnnealedTi-8Al-1Mo-1VLikely current
AMS 6915Titanium Alloy Bars Forgings and Forging Stock 7.0Al - 4.0Mo AnnealedLikely current
AMS 6920Titanium Alloy Bars Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat TreatedTi-3Al-8V-6Cr-4Mo-4Zr (Beta C)Likely current
AMS 6921Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated and AgedTi-3Al-8V-6Cr-4Mo-4Zr (Beta C)Likely current
AMS 6925Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated (Stabilized: Nov 2022)Ti-13V-11Cr-3AlStabilized 2022
AMS 6926Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated and Aged (Stabilized: Nov 2022)Ti-13V-11Cr-3AlStabilized 2022
AMS 6930Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 4.0V, Solution Heat Treated and AgedTi-6Al-4VLikely current
AMS 6931Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V AnnealedTi-6Al-4VLikely current
AMS 6932Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 4.0V Extra Low Interstitial AnnealedLikely current
AMS 6935Titanium Alloy Bars Forgings and Forging Stock 6.0Al 6.0V 2.0Sn Solution Heat Treated and AgedTi-6Al-6V-2SnLikely current
AMS 6936Titanium Alloy Bars, Forgings and Forging Stock 6Al - 6V - 2Sn AnnealedTi-6Al-6V-2SnLikely current
AMS 6940Titanium Alloy Bars Forgings and Forging Stock 3.0Al - 2.5V AnnealedTi-3Al-2.5VLikely current
AMS 6945Titanium Alloy Single Melt Sheet Strip and Plate 6Al - 4V AnnealedTi-6Al-4VLikely current
AMS 6946Titanium Alloy Sheet Strip and Plate 4Al - 2.5V - 1.5Fe AnnealedTi-4Al-2.5V-1.5FeLikely current
AMS 6947Titanium Alloy Bars Wire Forgings Rings and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed Heat TreatableTi-4Al-2.5V-1.5FeLikely current
AMS 6948Titanium Alloy Bars Wire Forgings Rings and Drawn Shapes 4Al - 2.5V -1.5 Fe AnnealedTi-4Al-2.5V-1.5FeLikely current
AMS 6949Titanium Alloy Sheet and Strip 4Al - 2.5V - 1.5Fe Electron Beam Single Melted.AnnealedTi-4Al-2.5V-1.5FeLikely current
AMS 6950Titanium Alloy Bars, Forgings, and Forging Stock 4Al - 2.5V - 1.5 Fe Single Hearth Melted, AnnealedLikely current
AMS 6951Titanium Alloy, Sheet 5Al - 4V - 0.75Mo - 0.5Fe AnnealedLikely current
AMS 6952Titanium Alloy, Forgings 5.8Al - 4.0Sn - 3.5Zr - 2.8Mo - 0.7Nb - 0.35Si - 0.06C Solution and Precipitation Heat TreatedLikely current
AMS 6953Titanium Alloy Sheet 6Al - 4Sn - 3Nb - 0.5Mo - 0.3Si Duplex AnnealedLikely current
AMS 7498Rings, Flash Welded Titanium and Titanium AlloysLikely current
AMS-F-83142Forgings, Titanium Alloy, Premium Quality (SAE adoption of MIL-F-83142)Ti-6Al-4V, Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-6V-2SnTo confirm
AMS-T-9046Titanium and Titanium Alloy, Sheet, Strip, and PlateCP Ti Grade 2, Ti-6Al-4V, Ti-5Al-2.5Sn, Ti-8Al-1Mo-1V, Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-6V-2Sn, Ti-13V-11Cr-3AlCancelled 2010
AMS-T-9047Titanium and Titanium Alloy Bars (Rolled or Forged) and Reforging Stock, Aircraft QualityCP Ti Grade 2, Ti-6Al-4V, Ti-5Al-2.5Sn, Ti-8Al-1Mo-1V, Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-6V-2SnCancelled 2010
AMS-T-81556Titanium and Titanium Alloys, Bars, Rods and Special Shaped Sections, Extruded (SAE adoption of MIL-T-81556)CP Ti Grade 2, Ti-5Al-2.5Sn, Ti-6Al-6V-2SnTo confirm
AMS-T-81915Titanium and Titanium-Alloy Castings, InvestmentCP Ti Grade 2, Ti-6Al-4VCurrent
ASME SB-265Specification for Titanium and Titanium Alloy Strip, Sheet, and PlateCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, CP Ti Grade 11 (Ti-0.2Pd, low O), Ti-0.3Mo-0.8Ni (Grade 12), Ti-3Al-2.5V-0.05Pd (Grade 18) …Current
ASME SB-338Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat ExchangersCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, Ti-0.3Mo-0.8Ni (Grade 12)Current
ASME SB-348Specification for Titanium and Titanium Alloy Bars and BilletsCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, CP Ti Grade 11 (Ti-0.2Pd, low O), Ti-0.3Mo-0.8Ni (Grade 12), Ti-6Al-4V ELICurrent
ASME SB-363Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding FittingsCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-0.2Pd (Grade 7), Ti-0.3Mo-0.8Ni (Grade 12)Current
ASME SB-367Specification for Titanium and Titanium Alloy CastingsCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-6Al-4V, Ti-0.2Pd (Grade 7), Ti-0.3Mo-0.8Ni (Grade 12)Current
ASME SB-381Specification for Titanium and Titanium Alloy ForgingsCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, CP Ti Grade 11 (Ti-0.2Pd, low O), Ti-0.3Mo-0.8Ni (Grade 12), Ti-6Al-4V ELICurrent
ASME SB-861Specification for Titanium and Titanium Alloy Seamless PipeCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, Ti-0.3Mo-0.8Ni (Grade 12)Current
ASME SB-862Specification for Titanium and Titanium Alloy Welded PipeCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, Ti-0.3Mo-0.8Ni (Grade 12)Current
ASTM B265Titanium and Titanium Alloy Strip, Sheet, and PlateCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, CP Ti Grade 4, Ti-6Al-4V, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, CP Ti Grade 11 (Ti-0.2Pd, low O) …Current
ASTM B337Seamless and Welded Titanium and Titanium Alloy PipeCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, Ti-0.3Mo-0.8Ni (Grade 12)WithdrawnASTM B861, ASTM B862
ASTM B338Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat ExchangersCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, Ti-0.3Mo-0.8Ni (Grade 12), Ti-3Al-2.5V-0.05Pd (Grade 18)Current
ASTM B348Titanium and Titanium Alloy Bars and BilletsCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, CP Ti Grade 4, Ti-6Al-4V, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, CP Ti Grade 11 (Ti-0.2Pd, low O) …Current
ASTM B363Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding FittingsCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-0.2Pd (Grade 7), Ti-0.3Mo-0.8Ni (Grade 12)Current
ASTM B367Titanium and Titanium Alloy CastingsCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-6Al-4V, Ti-0.2Pd (Grade 7), Ti-0.3Mo-0.8Ni (Grade 12)Current
ASTM B381Titanium and Titanium Alloy ForgingsCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, CP Ti Grade 4, Ti-6Al-4V, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, CP Ti Grade 11 (Ti-0.2Pd, low O) …Current
ASTM B861Titanium and Titanium Alloy Seamless PipeCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, Ti-0.3Mo-0.8Ni (Grade 12)Current
ASTM B862Titanium and Titanium Alloy Welded PipeCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, Ti-0.3Mo-0.8Ni (Grade 12)Current
ASTM B863Titanium and Titanium Alloy WireCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, CP Ti Grade 4, Ti-6Al-4V, Ti-0.2Pd (Grade 7), Ti-3Al-2.5V, Ti-0.3Mo-0.8Ni (Grade 12) …Current
ASTM F67Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)CP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, CP Ti Grade 4Current
ASTM F136Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)Ti-6Al-4V ELICurrent
ASTM F620Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta ConditionTi-6Al-4V ELICurrent
ASTM F1108Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)Ti-6Al-4VCurrent
ASTM F1295Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)Ti-6Al-7NbCurrent
ASTM F1472Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)Ti-6Al-4VCurrent
ASTM F1713Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)Ti-13Nb-13ZrCurrent
ASTM F2066Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)Ti-15MoCurrent
ASTM F2146Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)Ti-3Al-2.5VCurrent
ISO 5832-2Implants for surgery: Metallic materials, Part 2: Unalloyed titaniumCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, CP Ti Grade 4To confirm
ISO 5832-3Implants for surgery: Metallic materials, Part 3: Wrought titanium 6-aluminium 4-vanadium alloyTi-6Al-4V, Ti-6Al-4V ELITo confirm
JIS H4600Titanium and titanium alloys: Sheets, plates and stripsCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, CP Ti Grade 4, Ti-6Al-4VTo confirm
JIS H4630Titanium and titanium alloys: Seamless pipes and tubesCP Ti Grade 2, Ti-6Al-4VTo confirm
JIS H4650Titanium and titanium alloys: Rods and barsCP Ti Grade 1, CP Ti Grade 2, CP Ti Grade 3, CP Ti Grade 4, Ti-6Al-4VTo confirm
MIL-A-46077Armor Plate, Titanium Alloy, Weldable (title unconfirmed)Ti-6Al-4VTo confirm
MIL-C-46029Coper-Titanium Alloy Plate, Bar, Sheet and StripCancelled 1983
MIL-DTL-32528Rod, Bar, and Billet, Titanium Alloy TI-5111 for Use in Critical Seawater ApplicationCurrent
MIL-F-83142Forgings, Titanium Alloy, Premium QualityTi-6Al-4V, Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-6V-2SnCancelled 2006AMS-F-83142
MIL-N-81191Nickel-Titanium Alloys, Low Magnetic Effects; Bars, Plates, Sheets, Strips, and Shapes (for Special Purpose ToInactive for new design 2026
MIL-T-7993Titanium, Sheet, Strip and Plate (Unalloyed) (Supersedes MIL-T-9010 and MIL-T-12117)Cancelled 1954
MIL-T-8884Titanium Alloy, Sheet, Strip, and PlateCancelled 1960MIL-T-9046
MIL-T-9046Titanium and Titanium Alloy, Sheet, Strip, and PlateCP Ti Grade 2, Ti-6Al-4V, Ti-5Al-2.5Sn, Ti-8Al-1Mo-1V, Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-6V-2Sn, Ti-13V-11Cr-3AlCancelled 1999 (still common)AMS-T-9046
MIL-T-9047Titanium and Titanium Alloy, Bars and Reforging StockCP Ti Grade 2, Ti-6Al-4V, Ti-5Al-2.5Sn, Ti-8Al-1Mo-1V, Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-6V-2SnCancelled 2005 (still common)AMS-T-9047
MIL-T-14557Titanium and Titanium Alloy, Wrought, Bars, Forgings and Forging StockCancelled 1957MIL-T-9047
MIL-T-14558Titanium Alloy, PlateCancelled 1957MIL-T-9046
MIL-T-14577Titanium Alloy (title unconfirmed)Ti-6Al-4VTo confirm
MIL-T-24585Titanium Alloy Rod, Discs and Upset Forgings Composition TI-6A1-6V-2SNCurrent
MIL-T-24766Titanium Forgings and Forgings Stock, High Quality For Ships ServiceInactive for new design 2022
MIL-T-46035Titanium Alloy (title unconfirmed)Ti-6Al-4VTo confirm
MIL-T-46038Titanium Alloy (title unconfirmed)Ti-6Al-4VCancelled 1981
MIL-T-46077Titanium Alloy Armor Plate (title unconfirmed)Ti-6Al-4VTo confirm
MIL-T-81556Titanium and Titanium Alloys, Bars, Rods and Special Shaped Sections, ExtrudedCP Ti Grade 2, Ti-5Al-2.5Sn, Ti-6Al-6V-2SnCurrentAMS-T-81556
MIL-T-81915Titanium and Titanium Alloy Castings, InvestmentCP Ti Grade 2, Ti-6Al-4VCancelled 1998AMS-T-81915
Nickel alloys: 300 specs
SpecTitleAlloysStatusReplaced by
A-A-52549Nickel Base Alloy, Sheet, Corrosion-and Heat-Resistant (Metric)Current
AMS 4544Nickel-Copper Alloy, Corrosion-Resistant, Sheet, Strip, and Plate 67Ni - 30Cu AnnealedAlloy 400Likely current
AMS 4574Nickel-Copper Alloy, Corrosion Resistant, Tubing, Seamless 67Ni - 31Cu AnnealedAlloy 400Likely current
AMS 4674Nickel - Copper Alloy Corrosion-Resistant Bars and Forgings 67Ni - 30Cu - 0.04S Free MachiningAlloy R-405, Alloy 400Likely current
AMS 4675Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 67Ni - 30CuAlloy 400Likely current
AMS 4676Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 66.5Ni - 3.0Al - 0.62Ti - 28Cu Hot-Finished, Precipitation HardenableAlloy K-500Likely current
AMS 4677Nickel-Copper Alloy, Corrosion Resistant, Bars and Forgings 66.5Ni - 2.9Al - 30Cu AnnealedLikely current
AMS 4730Nickel-Copper Alloy Wire, Corrosion-Resistant 67Ni - 31Cu Annealed (400)Likely current
AMS 4731Nickel-Copper Alloy Wire and Ribbon, Corrosion-Resistant 67Ni - 31Cu AnnealedLikely current
AMS 4892Alloy Castings, Corrosion and Heat-Resistant 66Ni - 29Cu - 4.0Si As CastCurrent
AMS 4893Alloy Castings, Corrosion and Heat-Resistant 66Ni - 29Cu - 4.0Si Solution TreatedLikely current
AMS 5221Iron-Nickel Alloy Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat TreatedLikely current
AMS 5223Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 10% ReductionLikely current
AMS 5225Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 50% ReductionLikely current
AMS 5376Alloy, Corrosion and Heat Resistant, Investment Castings 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N As CastN-155Likely current
AMS 5377Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 73NI - 12 CR - 4.5MO - 2.0CB - 0.70TI - 0.05CCurrent
AMS 5383Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18FeAlloy 718Current
AMS 5388Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 53.3Ni-16.5Cr-17Mo-4.5W-5.8Fe-0.40V (CW-12MW)Current
AMS 5390Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 47.5NI - 22CR - 1.5CO - 9MO - 0.60W - 18.5FE (Current
AMS 5391Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 73NI - 0.14C - 13CR - 4.5M0 - 2.3CB - 0.75TI -Inconel 713CCurrent
AMS 5396Alloy, Nickel, Corrosion and Heat Resistant, Investment Castings 65NI - 28MO - 5.5FE - 0.40V (N-12MV) as CastCurrent
AMS 5397Alloy Castings, Investment, Corrosion and Heat Resistant 50NI - 9.5CR - 15CO - 3.0MO - 4.8TI - 5.5AI - 0.015BCurrent
AMS 5399Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat TreatedRene 41Likely current
AMS 5401Nickel Alloy Castings, Investment, Corrosion and Heat Resistant 62NI - 21.5CR - 9.0MO - 3.6CB (NB) Vacuum MeltAlloy 625Current
AMS 5402Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) As CastAlloy 625Likely current
AMS 5403Alloy Castings, Investment, Corrosion and Heat Resistant 60NI - 14CR - 9.5CO - 4.0MO - 4.0W - 5.0TI - 3.0AL -0Cancelled 2009
AMS 5405Alloy Castings, Investment, Corrosion and Heat Resistant 64Ni - 8.0Cr - 10Co - 6.0Mo - 1.0Ti - 4.2Ta - 6.0Al -Cancelled 2008
AMS 5407Alloy Castings, Investment, Corrosion and Heat Resistant 60NI - 9.0CR - 10CO - 12.5W - 1.0CB - 2.0TI - 5.0AL -Cancelled 2009
AMS 5410Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 61Ni - 16Cr - 8.5Co - 1.8Mo - 2.6W - 0.85Cb (Nb) - 3.4Ti - 1.8Ta - 3.4Al - 0.010B - 0.05Zr Vacuum Melted, Vacuum Cast As Cast, or Solution Treated, or Solution and Precipitation HardenedLikely current
AMS 5532Cobalt-Nickel-Chromium Iron Alloy, Sheet, Strip, and Plate (N-155) Solution Heat TreatedN-155Current
AMS 5536Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 18Fe - 9.0Mo - 1.5Co - 0.6W Solution Heat TreatedAlloy XCurrent
AMS 5540Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 74Ni - 15.5Cr - 8.0Fe AnnealedAlloy 600Current
AMS 5541Nickel Alloy Corrosion and Heat Resistant Sheet and Strip 73Ni - 15.5Cr - 2.4Ti - 0.7Al - 7.0Fe AnnealedAlloy X-750Likely current
AMS 5542Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70AAlloy X-750Current
AMS 5544Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 19Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al (Waspaloy) Solution Heat TreatedWaspaloyCurrent
AMS 5545Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 19Cr - 11Co - 10Mo - 3.1Ti - 1.5Al (Rene 41) Solution Heat TreatedRene 41Current
AMS 5550Alloy Sheet and Strip, Corrosion and Heat Resistant, 80 Ni - 15.5Cr - 0.62Ti - 3.25Al AnnealedCancelled 1995
AMS 5553Nickel, Sheet and Strip Low (0.02 MAX) Carbon AnnealedNickel 201Current
AMS 5555Nickel and Wire Ribbon 99NiLikely current
AMS 5580Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 74NI - 15.5CR - 8.0FE AnnealedAlloy 600Current
AMS 5581Nickel Alloy, Corrosion and Heat Resistant, Seamless or Welded Tubing 62NI - 21.5CR - 9.OMO - 3.7CB AnnealedAlloy 625Current
AMS 5582Nickel Alloy Corrosion and Heat-Resistant Seamless Tubing 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated Precipitation Hardenable to 155 ksi (1069 MPa) Tensile StrengthAlloy X-750Likely current
AMS 5583Nickel Alloy Corrosion and Heat-Resistant Seamless Tubing 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe Vacuum Melted Solution Heat Treated Precipitation Hardenable to 170 ksi (1172 MPa) Tensile StrengthAlloy X-750Likely current
AMS 5585Alloy Tubing, Welded (N-155)N-155Current
AMS 5587Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat TreatedAlloy XLikely current
AMS 5588Nickel Alloy, Corrosion- and Heat-Resistant, Welded Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat TreatedAlloy XLikely current
AMS 5589Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Solution Heat Treated (Creep Rupture)Alloy 718Current
AMS 5590Nickel Alloy, Corrosion and Heat-Resistant, Welded and Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe (Short-Time)Alloy 718Current
AMS 5592Iron-Nickel Alloy Corrosion and Heat-Resistant Sheet Strip and Plate 44Fe - 18.5Cr - 35Ni - 1.15Si Solution Heat TreatedAlloy 330Likely current
AMS 5593Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe Solution Heat TreatedLikely current
AMS 5596Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Solution Heat TreatedAlloy 718Current
AMS 5597Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Solution Heat Treated (Short-Time)Alloy 718Current
AMS 5599Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7 Cb (Nb) AnnealAlloy 625Current
AMS 5605Nickel Alloy Corrosion and Heat-Resistant Sheet Strip and Plate 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1800 آ°F (982 آ°C) Solution Heat TreatedAlloy 706Likely current
AMS 5606Alloy Corrosion and Heat-Resistant Sheet Strip and Plate 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 آ°F (954 آ°C) Solution Heat TreatedAlloy 706Likely current
AMS 5607Nickel Alloy Corrosion and Heat-Resistant Sheet Strip and Plate 73Ni - 7.0Cr - 16.5Mo Solution Heat TreatedLikely current
AMS 5662Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Solution Heat TreatedAlloy 718Current
AMS 5663Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Solution and Precipitation Heat TreatedAlloy 718Current
AMS 5664Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe (Short-Time)Alloy 718Current
AMS 5665Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 74NI - 15.5CR - 8.0FEAlloy 600Current
AMS 5666Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, Extrusions, and Rings 62Ni - 21.5Cr - 9.0Mo - 3.65Alloy 625Current
AMS 5667Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70AlAlloy X-750Current
AMS 5668Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 7.0Fe - 2.5Ti - 1.0(Cb+Ta) - 0.70Al, 2100 °F Solution and Precipitation Heat TreatedAlloy X-750Current
AMS 5670Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe 1800 آ°F (982 آ°C) Solution Heat Treated, Precipitation-HardenableAlloy X-750Likely current
AMS 5687Nickel Alloy, Corrosion- and Heat-Resistant, Wire 74Ni - 15.5Cr - 8.0Fe AnnealedAlloy 600Likely current
AMS 5698Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe No. 1 Temper,Alloy X-750Current
AMS 5699Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Spring TemperAlloy X-750Current
AMS 5701Nickel Alloy Corrosion and Heat-Resistant Bars Forgings and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1800 آ°F (982 آ°C) Solution Heat TreatedAlloy 706Likely current
AMS 5702Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1750 آ°F (954 آ°C) Solution Heat TreatedAlloy 706Likely current
AMS 5703Nickel Alloy Corrosion and Heat-Resistant Bars Forgings and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 آ°F (954 آ°C) Solution Stabilization and Precipitation Heat TreatedAlloy 706Likely current
AMS 5704Nickel Alloy, Corrosion and Heat-Resistant, Forgings 19Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al (Waspaloy)WaspaloyCurrent
AMS 5706Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F Solution Heat TreatedWaspaloyLikely current
AMS 5707Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Forging Stock 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, StabWaspaloyLikely current
AMS 5708Nickel Alloy Corrosion and Heat-Resistant Bars Wire Forgings and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1975 آ°F (1079 آ°C) Solution Heat TreatedWaspaloyLikely current
AMS 5709Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution, Stabilization, and Precipitation Heat Treated - UNSWaspaloyLikely current
AMS 5711Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La Solution Heat TreatedLikely current
AMS 5712Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings (Rene 41) Solution and Precipitation Heat TreatedRene 41Current
AMS 5713Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings (Rene 41) Solution Heat TreatedRene 41Current
AMS 5714Alloy Bars, Forgings, and Rings, Corrosion- and Heat-Resistant 73Ni - 15.5Cr - 2.5Ti - 0.70Al - 7.0Fe Precipitation HardenableLikely current
AMS 5715Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 60.5Ni - 23Cr - 14Fe - 1.4Al AnnealedLikely current
AMS 5716Iron-Nickel Alloy, Heat Resistant, Bars, Wire, Forgings, Rings and Stock for Rings and Forgings 44Fe - 18.5Cr - 35.5Ni - 1.1Si Solution Heat TreatedAlloy 330Likely current
AMS 5717Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 45.5Ni - 25.5Cr - 3.2Mo - 3.2W - 18.5Fe Solution Heat TreatedLikely current
AMS 5747Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe 1800 °F (982 °C) Solution Heat Treated, Precipitation HardenableLikely current
AMS 5750Bars, Alloy, Forgings, and Rings, Corrosion and Heat Resistant Nickel Base - 15.5Cr - 16Mo - 4W - 6Fe SolutionCancelled 1995
AMS 5754Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni - 22Cr - 18Fe - 9.0Mo - 1.5Co - 0.6W Solution Heat TreatedAlloy XCurrent
AMS 5755Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 64Ni - 5.0Cr - 24.5Mo - 5.5Fe Solution Heat TreatedLikely current
AMS 5756Bars Alloy, Forgings, and Rings Corrosion and Heat Resistant 54Ni - 19Cr - 10Co - 10Mo - 2.6Ti - 1.0Al - 0.006Rene 41Cancelled 1995
AMS 5757Alloy Bars, Forgings and Rings Corrosion and Heat Resistant 54Ni - 19Cr - 10Co - 10Mo - 2.6Ti - 10Al - 0.006BRene 41Cancelled 1995
AMS 5768Alloy Bars and Forgings (N-155)N-155Current
AMS 5769Alloy Bars and Forgings (N-155)N-155Current
AMS 5771Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 74Ni - 7.0Cr - 16.5Mo Solution Heat TreatedLikely current
AMS 5846Alloy, Corrosion and Heat-Resistant, Bars and Forgings 53Ni - 15Cr - 18.5Co - 5.0Mo - 3.2Ti - 4.2Al - 0.03B Double Vacuum Melted Solution, Stabilization, and Precipitation Heat TreatedLikely current
AMS 5865Nickel, Corrosion and Heat Resistant, Sheet and Strip Thoria Dispersion Strengthened 2.2TH02Alloy 718Cancelled 2012
AMS 5869Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb Solution Heat TreatedAlloy 625Likely current
AMS 5870Nickel Alloy Corrosion and Heat-Resistant Sheet Strip and Plate 60.5Ni - 23Cr - 14Fe - 0.35Ti - 1.4Al Solution Heat Treated.Alloy 601Likely current
AMS 5871Alloy, Corrosion and Heat-Resistant, Sheet, Strip and Plate 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe Solution Heat TreatedAlloy 800Likely current
AMS 5878Nickel Alloy, Corrosion and Heat-Resistant, Plate, Sheet, and Strip 57Ni - 22Cr - 14W - 2.0Mo - 0.35Al - 0.03La (Haynes 230) Solution Heat TreatedHaynes 230Current
AMS 5879Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Foil 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) Cold RolAlloy 625Current
AMS 5884Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low ExpansionLikely current
AMS 5888Nickel Alloy, Corrosion and Heat Resistant, Plate 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL AnnealedCurrent
AMS 5890Nickel, Corrosion and Heat Resistant, Bars, Forgings, and Extrusions Thoria Dispersion Strengthened 2.2TH02 StCancelled 2018
AMS 5891Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings 57Ni - 22Cr - 14W - 2.0Mo (Haynes 230) Solution Heat TreatedHaynes 230Current
AMS 5893Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8 (Cb + Ta)(Nb + Ta) - 1.6Ti Solution Heat Treated, Short-Time Precipitation Hardenable Multiple Melted, High Temperature, Low ExpansionLikely current
AMS 5916Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate (Haynes HR-120) Solution Heat TreatedHaynes HR-120Current
AMS 5951Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate (Haynes 282) Solution Heat TreatedHaynes 282Current
AMS 5961Nickel Alloy Corrosion and Heat-Resistant Wire 74Ni - 15.5Cr - 8.0Fe Cold Reduced Spring TemperAlloy 600Likely current
AMS 7701Nickel-Iron Alloy, Magnetic, Sheet and Strip AnnealedCancelled 2012
AMS 7702Nickel-Iron Alloy, Magnetic, Sheet and Strip Cold Rolled, Half Hard TemperCancelled 2012
AMS 7705Bars and Forgings, Nickel-Iron Magnetic AlloyCancelled 2012
AMS 7717Nickel-Iron Alloy, Magnetic, Sheet and Strip, 50NI - 50FE Annealed, Forming GradeNickel-iron 50NiCurrent
AMS 7718Nickel-Iron Alloy, Magnetic, Bars, Rods, Tubing, and Forgings 50NI – 50FECurrent
AMS 7719Nickel-Iron Alloy, Magnetic, Sheet and Strip 50Ni - 50Fe Stamping Quality, Half-Hard TemperNickel-iron 50NiCurrent
AMS 7791Alloy Sheet and Strip, Magnetic, 50Ni - 50Fe - Stamping QualityNickel-iron 50NiCancelled 1995
AMS-QQ-N-281Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped SectionsAlloy 400, Alloy R-405To confirm
AMS-QQ-N-286Nickel-Copper-Aluminum Alloy, Wrought (UNS N05500), Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped SectionsAlloy K-500To confirm
ASME SA-494Castings, Nickel and Nickel Alloy (ASME SA twin)Alloy 400, Alloy 600, Alloy 625, Alloy C-276, Alloy B-2Current
ASME SB-127Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip (ASME SB twin)Alloy 400Current
ASME SB-160Nickel Rod and Bar (ASME SB twin)Nickel 200, Nickel 201Current
ASME SB-161Nickel Seamless Pipe and Tube (ASME SB twin)Nickel 200, Nickel 201Current
ASME SB-162Nickel Plate, Sheet, and Strip (ASME SB twin)Nickel 200, Nickel 201Current
ASME SB-163Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes (ASME SB twin)Nickel 200, Nickel 201, Alloy 400, Alloy 600, Alloy 690, Alloy 800, Alloy 800H, Alloy 800HT …Current
ASME SB-164Nickel-Copper Alloy Rod, Bar, and Wire (ASME SB twin)Alloy 400, Alloy R-405Current
ASME SB-165Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube (ASME SB twin)Alloy 400Current
ASME SB-166Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire (ASME SB twin)Alloy 600, Alloy 601, Alloy 690, Alloy 617Current
ASME SB-167Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube (ASME SB twin)Alloy 600, Alloy 601, Alloy 690, Alloy 617Current
ASME SB-168Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip (ASME SB twin)Alloy 600, Alloy 601, Alloy 690, Alloy 617Current
ASME SB-333Nickel-Molybdenum Alloy Plate, Sheet, and Strip (ASME SB twin)Alloy B-2, Alloy B-3Current
ASME SB-335Nickel-Molybdenum Alloy Rod (ASME SB twin)Alloy B-2, Alloy B-3Current
ASME SB-366Factory-Made Wrought Nickel and Nickel Alloy Fittings (ASME SB twin)Nickel 200, Nickel 201, Alloy 400, Alloy 600, Alloy 625, Alloy 800, Alloy 825, Alloy 20 …Current
ASME SB-407Nickel-Iron-Chromium Alloy Seamless Pipe and Tube (ASME SB twin)Alloy 800, Alloy 800H, Alloy 800HTCurrent
ASME SB-408Nickel-Iron-Chromium Alloy Rod and Bar (ASME SB twin)Alloy 800, Alloy 800H, Alloy 800HTCurrent
ASME SB-409Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip (ASME SB twin)Alloy 800, Alloy 800H, Alloy 800HTCurrent
ASME SB-423Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube (ASME SB twin)Alloy 825Current
ASME SB-424Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Plate, Sheet, and Strip (ASME SB twin)Alloy 825Current
ASME SB-425Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221) Rod and Bar (ASME SB twin)Alloy 825Current
ASME SB-434Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003 and UNS N10242) Plate, Sheet, and Strip (ASME SB twin)Haynes 242Current
ASME SB-435UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip (ASME SB twin)Alloy X, Haynes 230Current
ASME SB-443Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Plate, Sheet, and Strip (ASME SB twin)Alloy 625Current
ASME SB-444Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube (ASME SB twin)Alloy 625Current
ASME SB-446Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar (ASME SB twin)Alloy 625Current
ASME SB-462Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, and UNS N10629 Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosion-Resistant High-Temperature Service (ASME SB twin)Alloy G-30, Alloy C-22, Alloy 20, Alloy C-276, Alloy B-2, Alloy B-3Current
ASME SB-463UNS N08020, N08026, and N08024 Alloy Plate, Sheet, and Strip (ASME SB twin)Alloy 20Withdrawn
ASME SB-464Welded UNS N08020, N08024, and N08026 Alloy Pipe (ASME SB twin)Alloy 20Withdrawn
ASME SB-468Welded UNS N08020, N08024, and N08026 Alloy Tubes (ASME SB twin)Alloy 20Withdrawn
ASME SB-472Nickel Alloy Billets and Bars for Reforging (ASME SB twin)Alloy 20Current
ASME SB-473UNS N08020, N08024, and N08026 Nickel Alloy Bar and Wire (ASME SB twin)Alloy 20Withdrawn
ASME SB-474Electric Fusion Welded Nickel and Nickel Alloy Pipe (ASME SB twin)Nickel 200, Nickel 201, Alloy 400, Alloy 600, Alloy 625, Alloy 825, Alloy C-276, Alloy C-22Current
ASME SB-511Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes (ASME SB twin)Alloy 330Current
ASME SB-514Welded Nickel-Iron-Chromium Alloy Pipe (ASME SB twin)Alloy 800, Alloy 800H, Alloy 800HTCurrent
ASME SB-515Welded Nickel-Iron-Chromium Alloy Tubes (ASME SB twin)Alloy 800, Alloy 800H, Alloy 800HTCurrent
ASME SB-516Welded Nickel-Chromium-Iron Alloy (UNS N06600, N06603, N06025, N06045) Tubes (ASME SB twin)Alloy 600Current
ASME SB-517Welded Nickel-Chromium-Iron Alloy (UNS N06600, N06603, N06025, N06045) Pipe (ASME SB twin)Alloy 600Current
ASME SB-535Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube (ASME SB twin)Alloy 330Current
ASME SB-536Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip (ASME SB twin)Alloy 330Current
ASME SB-564Nickel Alloy Forgings (ASME SB twin)Alloy 600, Alloy 601, Alloy 625, Alloy 690, Alloy 617, Alloy 800, Alloy 800H, Alloy 800HT …Current
ASME SB-572UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod (ASME SB twin)Alloy X, Haynes 230Current
ASME SB-573Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242, N10665, N10675, and N10629) Rod (ASME SB twin)Alloy B-2, Alloy B-3, Haynes 242Current
ASME SB-574Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod (ASME SB twin)Alloy C-276, Alloy C-22Current
ASME SB-575Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip (ASME SB twin)Alloy C-276, Alloy C-22Current
ASME SB-581Nickel-Chromium-Iron-Molybdenum-Copper Alloy (UNS N06007, N06030, N06975, N06985, and N06235) Rod (ASME SB twin)Alloy G-30Current
ASME SB-582Nickel-Chromium-Iron-Molybdenum-Copper Alloy (UNS N06007, N06030, N06975, N06985, and N06235) Plate, Sheet, and Strip (ASME SB twin)Alloy G-30Current
ASME SB-619Welded Nickel and Nickel-Cobalt Alloy Pipe (ASME SB twin)Alloy C-22, Alloy C-276, Alloy B-2, Alloy B-3, Alloy G-30, Alloy X, Haynes 230Current
ASME SB-622Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube (ASME SB twin)Alloy C-22, Alloy C-276, Alloy B-2, Alloy B-3, Alloy G-30, Alloy X, Haynes 230Current
ASME SB-626Welded Nickel and Nickel-Cobalt Alloy Tube (ASME SB twin)Alloy C-22, Alloy C-276, Alloy B-2, Alloy B-3, Alloy G-30, Alloy X, Haynes 230Current
ASME SB-637Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service (ASME SB twin)Alloy 718, Alloy X-750, Alloy 706, Waspaloy, Nimonic 80A, Rene 41Current
ASME SB-670Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service (ASME SB twin)Alloy 718Current
ASME SB-704Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes (ASME SB twin)Alloy 625, Alloy 825Current
ASME SB-705Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe (ASME SB twin)Alloy 625, Alloy 825Current
ASME SB-710Welded Nickel-Silicon Alloy (UNS N06698) Pipe and Tube (ASME SB twin)Alloy 600Current
ASME SB-725Welded Nickel (UNS N02200/N02201) and Nickel-Copper Alloy (UNS N04400) Pipe (ASME SB twin)Nickel 200, Nickel 201, Alloy 400Current
ASME SB-729Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube (ASME SB twin)Alloy 20Withdrawn
ASME SB-730Welded Nickel (UNS N02200/N02201) and Nickel-Copper Alloy (UNS N04400) Tube (ASME SB twin)Nickel 200, Nickel 201, Alloy 400Current
ASME SB-751General Requirements for Nickel and Nickel Alloy Welded Tube (ASME SB twin)Nickel 200, Alloy 400, Alloy 600, Alloy 625, Alloy C-276Current
ASME SB-775General Requirements for Nickel and Nickel Alloy Welded Pipe (ASME SB twin)Nickel 200, Alloy 400, Alloy 600, Alloy 625, Alloy C-276Current
ASME SB-829General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube (ASME SB twin)Nickel 200, Alloy 400, Alloy 600, Alloy 625, Alloy C-276Current
ASME SB-865Nickel-Copper-Aluminum Alloy (UNS N05500) Rod, Bar, Wire, and Plate (ASME SB twin)Alloy K-500Current
ASME SB-906General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip (ASME SB twin)Nickel 200, Alloy 400, Alloy 600, Alloy 625, Alloy C-276Current
ASTM A494Castings, Nickel and Nickel AlloyNickel 200, Alloy 400, Alloy 600, Alloy 625, Alloy C-276, Alloy B-2Current
ASTM B127Nickel-Copper Alloy Plate, Sheet, and StripAlloy 400Current
ASTM B160Nickel Rod and BarNickel 200, Nickel 201Current
ASTM B161Nickel Seamless Pipe and TubeNickel 200, Nickel 201Current
ASTM B162Nickel Plate, Sheet, and StripNickel 200, Nickel 201Current
ASTM B163Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger TubesNickel 200, Nickel 201, Alloy 400, Alloy 600, Alloy 690, Alloy 800, Alloy 800H, Alloy 800HT …Current
ASTM B164Nickel-Copper Alloy Rod, Bar, and WireAlloy 400, Alloy R-405Current
ASTM B165Nickel-Copper Alloy Seamless Pipe and TubeAlloy 400Current
ASTM B166Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Rod, Bar, and WireAlloy 600, Alloy 601, Alloy 690, Alloy 617Current
ASTM B167Nickel-Chromium-Aluminum Alloys, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Seamless Pipe and TubeAlloy 600, Alloy 601, Alloy 690, Alloy 617Current
ASTM B168Nickel-Chromium-Aluminum Alloys, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Plate, Sheet, and StripAlloy 600, Alloy 601, Alloy 690, Alloy 617Current
ASTM B333Nickel-Molybdenum Alloy Plate, Sheet, and StripAlloy B-2, Alloy B-3Current
ASTM B335Nickel-Molybdenum Alloy RodAlloy B-2, Alloy B-3Current
ASTM B366Factory-Made Wrought Nickel and Nickel Alloy FittingsNickel 200, Nickel 201, Alloy 400, Alloy 600, Alloy 625, Alloy 800, Alloy 825, Alloy 20 …Current
ASTM B407Nickel-Iron-Chromium Alloy Seamless Pipe and TubeAlloy 800, Alloy 800H, Alloy 800HTCurrent
ASTM B408Nickel-Iron-Chromium Alloy Rod and BarAlloy 800, Alloy 800H, Alloy 800HTCurrent
ASTM B409Nickel-Iron-Chromium Alloy Plate, Sheet, and StripAlloy 800, Alloy 800H, Alloy 800HTCurrent
ASTM B423Nickel-Iron-Chromium-Molybdenum-Copper Alloy Seamless Pipe and TubeAlloy 825Current
ASTM B424Nickel-Iron-Chromium-Molybdenum-Copper Alloys Plate, Sheet, and StripAlloy 825Current
ASTM B425Nickel-Iron-Chromium-Molybdenum-Copper Alloys Rod and BarAlloy 825Current
ASTM B434Nickel-Molybdenum-Chromium-Iron Alloys Plate, Sheet, and StripHaynes 242Current
ASTM B435Heat and Corrosion Resistant High Temperature Alloy Plate, Sheet, and StripAlloy X, Haynes 230Current
ASTM B443Nickel-Chromium-Molybdenum-Columbium Alloy and Nickel-Chromium-Molybdenum-Silicon Alloy Plate, Sheet, and StripAlloy 625Current
ASTM B444Nickel-Chromium-Molybdenum-Niobium Alloys and Nickel-Chromium-Molybdenum-Silicon Alloy Pipe and TubeAlloy 625Current
ASTM B446Nickel-Chromium-Molybdenum-Niobium Alloy, Nickel-Chromium-Molybdenum-Silicon Alloy, and Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and BarAlloy 625Current
ASTM B462Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature ServiceAlloy G-30, Alloy C-22, Alloy 20, Alloy C-276, Alloy B-2, Alloy B-3Current
ASTM B463UNS N08020 Alloy Plate, Sheet, and StripAlloy 20Withdrawn 2026
ASTM B464Welded UNS N08020 Alloy PipeAlloy 20Withdrawn 2025
ASTM B468Welded UNS N08020 Alloy TubesAlloy 20Withdrawn 2025
ASTM B472Nickel Alloy Billets and Bars for ReforgingAlloy 20Current
ASTM B473Nickel-Iron-Chromium-Molybdenum-Copper Alloy Bar and WireAlloy 20Withdrawn 2026
ASTM B474Electric Fusion Welded Nickel and Nickel Alloy PipeNickel 200, Nickel 201, Alloy 400, Alloy 600, Alloy 625, Alloy 825, Alloy C-276, Alloy C-22Current
ASTM B511Nickel-Iron-Chromium-Silicon Alloy Bars and ShapesAlloy 330Current
ASTM B514Welded Nickel-Iron-Chromium Alloy PipeAlloy 800, Alloy 800H, Alloy 800HTCurrent
ASTM B515Welded Nickel-Iron-Chromium Alloy TubesAlloy 800, Alloy 800H, Alloy 800HTCurrent
ASTM B516Welded Nickel-Chromium-Aluminum Alloy and Nickel-Chromium-Iron Alloy TubesAlloy 600Current
ASTM B517Welded Nickel-Chromium-Iron-Alloy PipeAlloy 600Current
ASTM B535Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and TubeAlloy 330Current
ASTM B536Nickel-Iron-Chromium-Silicon Alloys Plate, Sheet, and StripAlloy 330Current
ASTM B564Nickel Alloy ForgingsAlloy 600, Alloy 601, Alloy 625, Alloy 690, Alloy 617, Alloy 800, Alloy 800H, Alloy 800HT …Current
ASTM B572Heat and Corrosion Resistant High Temperature Alloy Bar or RodAlloy X, Haynes 230Current
ASTM B573Nickel-Molybdenum-Chromium-Iron Alloys Bar or RodAlloy B-2, Alloy B-3, Haynes 242Current
ASTM B574Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-TungstenAlloy C-276, Alloy C-22Current
ASTM B575Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-ChromiumAlloy C-276, Alloy C-22Current
ASTM B581Nickel-Chromium-Iron-Molybdenum-Copper Alloy RodAlloy G-30Current
ASTM B582Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and StripAlloy G-30Current
ASTM B619Welded Nickel and Nickel-Cobalt Alloy PipeAlloy C-22, Alloy C-276, Alloy B-2, Alloy B-3, Alloy G-30, Alloy X, Haynes 230Current
ASTM B622Seamless Nickel and Nickel-Cobalt Alloy Pipe and TubeAlloy C-22, Alloy C-276, Alloy B-2, Alloy B-3, Alloy G-30, Alloy X, Haynes 230Current
ASTM B626Welded Nickel and Nickel-Cobalt Alloy TubeAlloy C-22, Alloy C-276, Alloy B-2, Alloy B-3, Alloy G-30, Alloy X, Haynes 230Current
ASTM B637Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature ServiceAlloy 718, Alloy X-750, Alloy 706, Waspaloy, Nimonic 80A, Rene 41Current
ASTM B670Precipitation-Hardening Nickel Alloy Plate, Sheet, and Strip for High-Temperature ServiceAlloy 718Current
ASTM B704Welded Nickel Alloy TubesAlloy 625, Alloy 825Current
ASTM B705Nickel-Chromium-Molybdenum-Niobium Alloy, Nickel-Chromium-Molybdenum-Silicon Alloy, and Nickel-Iron-Chromium-Molybdenum-Copper Alloy Welded PipeAlloy 625, Alloy 825Current
ASTM B710Nickel-Iron-Chromium-Silicon Alloy Welded PipeAlloy 600Current
ASTM B725Welded Nickel and Nickel Copper Alloy PipeNickel 200, Nickel 201, Alloy 400Current
ASTM B729Seamless Nickel-Iron-Chromium-Molybdenum-Copper Nickel Alloy Pipe and TubeAlloy 20Withdrawn 2026
ASTM B730Welded Nickel and Nickel Copper Alloy TubeNickel 200, Nickel 201, Alloy 400Current
ASTM B751General Requirements for Nickel and Nickel Alloy Welded TubeNickel 200, Alloy 400, Alloy 600, Alloy 625, Alloy C-276Current
ASTM B775General Requirements for Nickel and Nickel Alloy Welded PipeNickel 200, Alloy 400, Alloy 600, Alloy 625, Alloy C-276Current
ASTM B829General Requirements for Nickel and Nickel Alloys Seamless Pipe and TubeNickel 200, Alloy 400, Alloy 600, Alloy 625, Alloy C-276Current
ASTM B865Precipitation Hardening Nickel-Copper-Aluminum Alloy Bar, Rod, Wire, Forgings, and Forging StockAlloy K-500Current
ASTM B906General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and StripNickel 200, Alloy 400, Alloy 600, Alloy 625, Alloy C-276Current
ASTM F15Iron-Nickel-Cobalt Sealing AlloyKovarWithdrawn 2024
ASTM F30Iron-Nickel Sealing AlloysAlloy 42, Alloy 52Withdrawn 2024
ASTM F1684Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion ApplicationsInvar 36, KovarWithdrawn 2024
ASTM F3055Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed FusionAlloy 718Current
ASTM F3056Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed FusionAlloy 625Current
DIN 17742Nickel and Nickel Wrought Alloys; Chemical Composition (DIN, German)Nickel 200, Alloy 400, Alloy 600To confirm
DIN 17750Strip and Sheet of Nickel and Nickel Wrought Alloys (DIN, German)Nickel 200, Alloy 400, Alloy 600To confirm
DIN 17751Tubes of Nickel and Nickel Wrought Alloys (DIN, German)Nickel 200, Alloy 400, Alloy 600To confirm
DIN 17752Rods and Bars of Nickel and Nickel Wrought Alloys (DIN, German)Nickel 200, Alloy 400, Alloy 600To confirm
DIN 17753Wires of Nickel and Nickel Wrought Alloys (DIN, German)Nickel 200, Alloy 400, Alloy 600To confirm
DIN 17754Forgings of Nickel and Nickel Wrought Alloys (DIN, German)Nickel 200, Alloy 400, Alloy 600To confirm
EN 10095Heat Resisting Steels and Nickel AlloysAlloy 600, Alloy 601, Alloy 800HCurrent
EN 10302Creep Resisting Steels, Nickel and Cobalt AlloysAlloy 718, Waspaloy, Nimonic 80ACurrent
MIL-C-24707/3Castings, Ferrous, Corrosion-Resistant, Austenitic, Chromium-NickelCurrent
MIL-C-24723Castings, Nickel-Copper AlloyCurrent
MIL-DTL-23227Tube and Pipe, Nickel-Chromium-Iron Alloy (UNS N06600)Alloy 600Current
MIL-DTL-23228Nickel-Chromium-Iron Alloy Plate, Sheet and Strip (UNS N06600)Alloy 600Current
MIL-DTL-23229Nickel-Chromium-Iron Alloy Bars and Forgings (UNS N06600)Alloy 600Current
MIL-DTL-23520Tube and Pipe, Nickel-Copper Alloy, Seamless, Air Melted (UNS N04400)Alloy 400Current
MIL-DTL-24106Nickel-Copper Alloy Bars, Rods, and Forgings (UNS N04400)Alloy 400Current
MIL-DTL-24114Nickel-Chromium-Iron Age-Hardenable Alloy Bars, Rods, and Forgings (UNS N07750)Alloy X-750Current
MIL-DTL-24422Nickel-Chromium-Boron and Nickel-Chromium-Carbon Alloy Castings, Wear and Corrosion ResistantCurrent
MIL-DTL-24492Nickel-Chromium-Iron-Niobium Age-Hardenable Alloy, Bars, Reforging Stock, and Forgings (UNS N07718)Alloy 718Current
MIL-DTL-24493Wire, Cold Drawn, Age-Hardenable Nickel-Chromium Iron Alloy (UNS N07750)Alloy X-750Current
MIL-DTL-24549Nickel-Copper-Aluminum Age Hardenable Alloy, Bars (UNS N05500)Alloy K-500Current
MIL-DTL-24687Nickel-Chromium-Molybdenum-Niobium Alloy, Bars and Forgings (UNS N06625)Alloy 625Current
MIL-DTL-24799Nickel-Chromium-Molybdenum-Niobium Age-Hardenable Alloy, Bars and Forgings (UNS N06625)Alloy 625Current
MIL-DTL-24801Nickel-Chromium-Iron Alloy, Bars and Forgings (UNS N06690)Alloy 690Current
MIL-DTL-24802Nickel-Chromium-Iron Alloy Plate (UNS N06690)Alloy 690Current
MIL-DTL-24803Nickel-Chromium-Iron Alloy Tube Reduced Extrusions (UNS N06690)Alloy 690Current
MIL-DTL-32386Nickel-Chromium-Molybdenum-Niobium Alloy, Seamless Pipe (UNS N06625)Alloy 625Current
MIL-DTL-32669Tube and Pipe, Nickel-Chromium-Iron Alloy, Seamless (UNS N06690)Alloy 690Current
MIL-I-23011Iron-Nickel Alloys for Sealing to Glasses and CeramicsAlloy 42, KovarTo confirm
MIL-N-894Nickel-Copper Alloy Bars, Plates, and Other Wrought FormsCancelled 1957QQ-N-281
MIL-N-4498Nickel-Copper Alloy, CastingsCancelled 1961QQ-N-288
MIL-N-6710Nickel Chromium Iron Alloy, Bars, Rods and Forgings (See ASTM-B166 and ASTM-B564)Cancelled 1982
MIL-N-6840Nickel Chromium Iron Alloy Plate Sheet & StripCancelled 1982ASTM B168
MIL-N-7786Nickel-Chromium Alloy, Sheet and Strip, Age-Hardenable AnnealedCancelled 2002AMS 5542
MIL-N-8550Nickel Alloy, Bars, and Forgings, 1,200 Deg. F to 1,500 Deg. F Operating TemperaturesCancelled 1990
MIL-N-14411Nickel-Iron Alloy, High Magnetic Permeability Sheet, Strip, Rod, Bar, and Wire (Future acquisition for this maCancelled 2025
MIL-N-19153Nickel Strip for Transducer Laminations for TorpedoesCancelled 1963
MIL-N-20164Nickel-Copper-Alloy: CastingsCancelled 1957QQ-N-288
MIL-N-20165Nickel-Copper-Silicon Alloy: CastingsCancelled 1957QQ-N-288
MIL-N-22840Nickel, Iron Alloy (50 Percent Nickel) Strip, Bar and Rod, for Magnetic ApplicationsCancelled 1978
MIL-N-22986Nickel-Chromium-Iron Alloy Plate, Sheet and Strip, Corrosion Resisting, for Nuclear Plant ServiceCancelled 1961
MIL-N-22987Nickel-Chromium-Iron Alloy Bars, Rods, Forgings, and Forging Stock, Corrosion Resisting, Nuclear Plant ServiceCancelled 1961
MIL-N-24271(title not confirmed; look up on ASSIST)Alloy 400Current
MIL-N-24469(title not confirmed; look up on ASSIST)Alloy 400Cancelled 1984
MIL-N-24590Nickel Chromium Iron Alloy Heat Transfer TubingCurrent
MIL-N-46025Nickel Bar, Flat Wire (Ribbon) and Strip (For Electronic Use)Inactive for new design 2014
MIL-N-46026Nickel Rod and Wire (round) (for Electronic Use)Cancelled 1997
MIL-N-62623Nickel Base Alloy, Sheet, Corrosion- and Heat-ResistantCancelled 1996A-A-52549
MIL-T-1368Tube and Pipe, Nickel-Copper Alloy, Seamless and WeldedCurrent
MIL-T-7840Tubing, Nickel Chromium Iron Alloy, Seamless or Welded, (for Aircraft Applications)Cancelled 1982AMS 5580
MIL-T-22945Tube and Pipe, Nickel-Chromium-Iron Alloy Corrosion-Resisting, for Nuclear Plant ServiceCancelled 1961
MIL-T-52070Tube Nickel, Seamless (for Electronic Use)Cancelled 1959
MIL-W-19487Wire, Nickel-Base Alloy, Age HardenableCancelled 2021
QQ-N-281Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped SectionsAlloy 400, Alloy R-405CurrentASTM B127, ASTM B164
QQ-N-286Nickel-Copper-Aluminum Alloy, Wrought (UNS N05500), Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped SectionsAlloy K-500Cancelled (still common)ASTM B865
QQ-N-288(title not confirmed; look up on ASSIST)Alloy 400Cancelled 1992
QQ-W-390Wire, Nickel-Chromium-Iron AlloyCancelled 1992ASTM B166
Cobalt alloys: 34 specs
SpecTitleAlloysStatusReplaced by
A-A-59512Tube, Metallic, Seamless - Cobalt Alloy (1 Inch O.D.)Current
AMS 2262Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and PlateCurrent
AMS 5375Alloy Castings, Investment, Corrosion and Heat Resistant 65.5CO - 25CR - 1.8NI - 5.0W as CastCancelled 2009
AMS 5380Cobalt Alloy, Corrosion and Heat Resistant, Investment Castings 50.5Co-26Cr-15Ni-6.0Mo As CastCurrent
AMS 5382Cobalt Alloy, Corrosion and Heat Resistant, Investment Castings 54CO - 25.5CR - 10.5NI - 7.5W As CastCurrent
AMS 5385Cobalt Alloy, Corrosion and Heat Resistant, Investment Castings 62Co-27Cr-2.8Ni-5.5Mo As CastCurrent
AMS 5387Alloy Castings, Investment, Corrosion and Heat Resistant 60 CO -29CR - 4.5W AS CASTCurrent
AMS 5537Cobalt Alloy, Corrosion and Heat-Resistant, Sheet and Strip 20Cr - 10Ni - 15W Solution Heat TreatedL-605 (Haynes 25)Current
AMS 5608Cobalt Alloy, Corrosion and Heat-Resistant, Sheet and Plate 22Cr - 22Ni - 14.5W - 0.07La Solution Heat TreatedHaynes 188Current
AMS 5759Cobalt Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 20Cr - 10Ni - 15W Solution Heat TreatedL-605 (Haynes 25)Current
AMS 5772Cobalt Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 22Cr - 22Ni - 14.5W - 0.07La Solution Heat TreatedHaynes 188Current
AMS 5788Cobalt Alloy, Corrosion and Heat-Resistant, Hard Facing Rods and Wire 62Co - 29Cr - 4.5W - 1.2CCurrent
AMS 5819Rod and Wire 62CO - 27CR - 2.9NI - 5.5MO, Hardfacing Cardfacing Caobalt Alloy, Corrosion and Heat ResistantCurrent
AMS 5833Cobalt Alloy, Corrosion and Heat-Resistant, Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated and Cold DrawnElgiloyLikely current
AMS 5842Cobalt-Nickel Alloy, Bars, Solution Treated and Cold Drawn (MP159)MP159Current
AMS 5843Cobalt-Nickel Alloy, Bars, Solution Treated, Cold Drawn and Aged (MP159)MP159Current
AMS 5844Cobalt-Nickel Alloy, Bars, Solution Treated and Cold Drawn (35Co-35Ni-20Cr-10Mo, MP35N)MP35NCurrent
AMS 5845Cobalt-Nickel Alloy, Bars, Solution Treated, Cold Drawn and Aged (MP35N)MP35NCurrent
AMS 5894Cobalt Alloys, Bars, Sheet, and Plate 60Co - 28Cr - 4.5W - 1.15C Solution Heat TreatedLikely current
AMS 5918Cobalt Alloy, Corrosion and Heat Resistant, Bars 62Co-28Cr-6Mo Warm-WorkedLikely current
AMS 5940Alloy Corrosion and Heat-Resistant Bars Forgings and Rings 34Co - 3.0Cr - 28Ni - 3.0Cb(Nb) - 5.5Al - 0.008B - 25.5Fe Multiple Melted High Temperature Oxidation-Resistant Low Expansion Solution Heat Treated Precipitation-HardenableLikely current
AMS 7238Alloy PM Shapes, Corrosion, Wear, and Heat Resistant 56Co - 30Cr - 8.25W (1.10 - 1.90C)Cancelled 1995
AMS 7239Alloy PM Shapes, Corrosion, Wear, and Heat Resistant 60Co - 29Cr - 4.5W (0.90 - 1.40C)Cancelled 1995
ASTM F75Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)Co-28Cr-6Mo (F75)Current
ASTM F90Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)L-605 (Haynes 25)Current
ASTM F562Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)MP35NCurrent
ASTM F563Wrought Cobalt-20Nickel-20Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy for Surgical Implant Applications (UNS R30563)Co-20Ni-20Cr-3.5Mo-3.5W-5FeWithdrawn 2005
ASTM F799Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)Co-28Cr-6Mo wrought (F1537)Current
ASTM F1058Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)ElgiloyCurrent
ASTM F1537Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)Co-28Cr-6Mo wrought (F1537)Current
MIL-C-24689Cobalt Alloy Castings, Wear and Corrosion ResistantCurrent
MIL-C-62624Castings, Investment, Cobalt Base AlloyCancelled 1998
MIL-DTL-24248Cobalt Alloy Castings, Wear and Corrosion ResistantCurrent
MIL-DTL-24252Cobalt-Chromium-Tungsten-Nickel Alloy (UNS R30605) and Cobalt-Chromium-Tungsten Alloy (UNS R30016) Bars and FoL-605 (Haynes 25)Current
Copper and brass, wrought: 264 specs
SpecTitleAlloysStatusReplaced by
AMS 2222Tolerances Copper and Copper Alloy Sheet, Strip, and PlateCurrent
AMS 2223Tolerances Copper and Copper Alloy Seamless TubingCurrent
AMS 4500Copper, Sheet, Strip, and Plate Soft AnnealedCurrent
AMS 4501Copper product (title unconfirmed)Likely current
AMS 4505Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30Zn Annealed (OS035)C26000Current
AMS 4507Copper Alloy (Brass), Sheet, Strip, and Plate 70CU - 30ZN Half Hard (H02)C26000Current
AMS 4510Phosphor Bronze, Sheet, Strip, and Plate 94.5Cu - 4.0Sn - 0.19P Spring Temper (H08)C51000Likely current
AMS 4520Leaded Phosphor Bronze Strip 88.5Cu - 4.0Sn - 4.0Pb - 3.0Zn - 0.26P Cold Rolled, Half Hard (H02)C51000Likely current
AMS 4530Copper-Beryllium Alloy Sheet, Strip, and Plate 98Cu - 1.9Be Solution Heat Treated (TB00)C17200Likely current
AMS 4532Copper-Beryllium Alloy, Sheet and Strip 98Cu - 1.9Be Half Hard (TD02)C17200Likely current
AMS 4533Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)C17200Likely current
AMS 4534Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT)C17200Likely current
AMS 4535Copper-Beryllium Alloy, Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)C17200Likely current
AMS 4553Brass, Seamless, Tubing 85Cu - 15Zn Annealed (O61)Likely current
AMS 4554Brass Tubing Seamless 66.5Cu - 33Zn - 0.45Pb AnnealedC33000Likely current
AMS 4555Leaded Brass, Seamless Tubing 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (O50)Likely current
AMS 4558Brass, Seamless Tubing 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58)Likely current
AMS 4590Extrusions, Nickel-Aluminum Bronze, Martensitic 78.5Cu ??? 10.5Al ??? 5.1Ni ??? 4.8Fe Quenched and Tempered (TQ50)Likely current
AMS 4595Copper Nickel Tin Alloy Plate 77Cu 15Ni 8Sn Solution Annealed and Spinodal Hardened (TX 00)C72900Likely current
AMS 4596Copper Nickel Tin Alloy, Bars and Rods 77Cu 15Ni 8Sn Solution Annealed and Spinodal Hardened (TX 00)C72900Likely current
AMS 4597Copper-Nickel-Tin Alloy, Bars and Rods 77Cu - 15Ni - 8Sn Solution Annealed, Cold Finished and Spinodal Hardened (TX TS)C72900Likely current
AMS 4598Copper-Nickel-Tin Alloy, Mechanical Tube 77Cu - 15Ni - 8Sn Solution Annealed and Spinodal Hardened (TX02, formerly TX00)C72900Likely current
AMS 4602Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (H04)Likely current
AMS 4610Brass Free-Cutting Bars and Rods 61.5Cu - 35Zn - 3.1Pb Half Hard (H02)C36000Likely current
AMS 4611Brass Naval Bars and Rods 60.5Cu - 38.7Zn - 0.8Sn Half Hard (H02)C46400Likely current
AMS 4612Brass, Naval, Bars and Rods 60.5Cu - 38.5Zn - 0.75Sn Hard Temper (H04)C46400Likely current
AMS 4614Brass Forgings, Free Cutting 60Cu - 2.0Pb - 37.5Zn As Forged (M10)Likely current
AMS 4616Silicon Bronze Bars, Rods, Forgings,and tubing 92CU-3.2SI-2.8ZN-1.5FE Stress RelievedC65500Current
AMS 4625Phosphor Bronze Bars, Rods, And Tubing 95cu - 5sn Hard TemperC51000Current
AMS 4631Aluminum Bronze Rods, Bars, and Forgings 90.5Cu - 7.5Al - 1.95: Stress RelievedLikely current
AMS 4633Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu - 7.0Al - 1.8Si Drawn and Stress Relieved (HR50)Likely current
AMS 4634Aluminum Bronze Bars, Rods, and Forgings 90.5Cu - 7.5Al - 1.9Si Stress RelievedC64200Likely current
AMS 4635Aluminum Bronze Bars, Rods, and Forgings 87Cu - 9Al - 3Fe Stress RelievedLikely current
AMS 4640Aluminum Bronze Bars, Rods, Shapes, Tubes, And Forgings 81.5cu - 10.0al - 4.8ni - 3.0fe Drawn And Stress RelieC63000Current
AMS 4650Copper-Beryllium Alloy Bars, Rods, Shapes and Forgings (C17200), Solution Heat TreatedC17200Current
AMS 4651Copper Beryllium Alloy Bars and Rods 98CU - 1.9BE (CDA 172) Hard Temper (TD04)C17200Current
AMS 4700Copper Wire Bare High PurityC10100Likely current
AMS 4701Copper Wire, Oxygen-Free 99.95(Cu+Ag) Annealed (Stabilized Type)C10200Stabilized 2015
AMS 4710Brass Wire, Tinned 65Cu - 35Zn Annealed (061)C27000Likely current
AMS 4712Copper Alloy, Wire 65Cu - 35Zn Annealed (O61)Likely current
AMS 4713Brass Wire 65Cu - 35Zn Eighth-Hard (H00)C27000Likely current
AMS 4720Wire, Phosphor Bronze 94Cu - 5.0Sn - 0.19P Cold Drawn, Spring Temper (H08)C51000Likely current
AMS 4725Copper-Beryllium Alloy Wire 98Cu - 1.9Be Solution Heat TreatedC17200Likely current
AMS 7320Rings Sealing Cast Leaded-Tin Bronze 80Cu 16Sn 5Pb As CastC92800Likely current
AMS 7732Steel Wire, Copper Clad 99FE - 0.32MN AnnealedCurrent
AMS 7733Steel Wire, Copper Clad, Round 99Fe - 0.45Mn (0.13C max) Annealed (Stabilized Type)Stabilized 2012
ASME SB-21Naval Brass Rod, Bar and ShapesC46400Current
ASME SB-42Seamless Copper Pipe, Standard SizesC10200, C12000, C12200Current
ASME SB-43Seamless Red Brass Pipe, Standard SizesC23000Current
ASME SB-75Seamless Copper TubeC10200, C12000, C12200Current
ASME SB-96Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure VesselsC65100, C65500Current
ASME SB-98Copper-Silicon Alloy Rod, Bar, and ShapesC65100, C65500Current
ASME SB-103Phosphor Bronze Plate, Sheet, Strip, and Rolled BarC51000, C52100Current
ASME SB-111Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule StockC12200, C23000, C44300, C70600, C71500, C61400, C68700Current
ASME SB-122Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled BarC70600, C71500Current
ASME SB-124Copper and Copper Alloy Forging Rod, Bar, and ShapesC11000, C37700, C46400Current
ASME SB-135Seamless Brass TubeC23000, C26000Current
ASME SB-139Phosphor Bronze Rod, Bar, and ShapesC51000, C52100, C54400Current
ASME SB-150Aluminum Bronze Rod, Bar, and ShapesC61400, C63000, C64200Current
ASME SB-151Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and BarC70600, C71500Current
ASME SB-152Copper Sheet, Strip, Plate, and Rolled BarC10200, C11000, C12200Current
ASME SB-169Aluminum Bronze Plate, Sheet, Strip, and Rolled BarC61400, C63000Current
ASME SB-171Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat ExchangersC46400, C44300, C70600, C71500, C61400Current
ASME SB-187Copper, Bus Bar, Rod and ShapesC10200, C11000Current
ASME SB-283Copper and Copper-Alloy Die ForgingsC37700, C46400Current
ASME SB-315Seamless Copper Alloy Pipe and TubeC70600, C71500, C65500Current
ASME SB-359Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral FinsC12200, C44300Current
ASME SB-395U-Bend Seamless Copper and Copper-Alloy Heat-Exchanger and Condenser TubesC12200, C44300Current
ASME SB-466Seamless Copper-Nickel Pipe and TubeC70600, C71500Current
ASME SB-467Welded Copper-Nickel PipeC70600, C71500Current
ASME SB-543Welded Copper and Copper-Alloy Heat Exchanger TubeC70600, C71500Current
ASME SB-608Welded Copper-Alloy PipeC70600, C71500Current
ASTM B1Hard-Drawn Copper WireC10100, C10200, C11000, C10300, C10800, C12000Current
ASTM B2Medium-Hard-Drawn Copper WireC10100, C10200, C11000, C10300, C10800, C12000Current
ASTM B3Soft or Annealed Copper WireC10100, C10200, C11000, C10300, C10800, C12000Current
ASTM B16Free-Cutting Brass Rod, Bar and Shapes for Use in Screw MachinesC36000, C36010Current
ASTM B21Naval Brass Rod, Bar, and ShapesC46400, C48200, C48500, C46200Current
ASTM B36Brass Plate, Sheet, Strip, And Rolled BarC21000, C22000, C23000, C24000, C26000, C26800, C27000, C27200 …Current
ASTM B42Seamless Copper Pipe, Standard SizesC10200, C12000, C12200Current
ASTM B43Seamless Red Brass Pipe, Standard SizesC23000Current
ASTM B49Copper Rod for Electrical PurposesC11000, C10100, C10200Current
ASTM B68Seamless Copper Tube, Bright AnnealedC10100, C10200, C12000, C12200Current
ASTM B75Seamless Copper TubeC10100, C10200, C10300, C10800, C12000, C12200, C14200Current
ASTM B88Seamless Copper Water TubeC10200, C12000, C12200Current
ASTM B96Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure VesselsC65100, C65500, C66100Current
ASTM B97Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for Architectural PurposesC65100, C65500WithdrawnASTM B96
ASTM B98Copper-Silicon Alloy Rod, Bar and ShapesC65100, C65500, C66100Current
ASTM B99Copper-Silicon Alloy Wire for General ApplicationsC65100, C65500, C66100Current
ASTM B100Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural UseC51000, C51100Current
ASTM B103Phosphor Bronze Plate, Sheet, Strip, and Rolled BarC51000, C51100, C52100, C52400Current
ASTM B105Hard-Drawn Copper Alloy Wires for Electric ConductorsC51000Withdrawn 2023
ASTM B111Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule StockC10100, C10200, C12000, C12200, C14200, C19200, C23000, C28000 …Current
ASTM B121Leaded Brass Plate, Sheet, Strip, and Rolled BarC33500, C34000, C35000, C35300, C35600, C37000Current
ASTM B122Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled BarC70600, C71500, C72200, C72500, C74500, C75200, C77000Current
ASTM B124Copper and Copper Alloy Forging Rod, Bar, and ShapesC11000, C14500, C14700, C37700, C46400, C48500, C64200, C65500 …Current
ASTM B129Cartridge Brass Cartridge Case CupsCurrent
ASTM B130Commercial Bronze Strip for Bullet JacketsC22000, C21000Current
ASTM B133Copper Rod, Bar, and Shapes [Metric]C10100, C10200, C11000, C14500, C14700Withdrawn 1994ASTM B187
ASTM B134Brass WireC21000, C22000, C23000, C26000, C26800, C27000, C27200, C28000Current
ASTM B135Seamless Brass TubeC23000, C26000, C27000, C28000, C33000, C33200Current
ASTM B138Manganese Bronze Rod, Bar, and ShapesC67500Current
ASTM B139Phosphor Bronze Rod, Bar, and ShapesC51000, C51100, C52100, C52400, C54400Current
ASTM B150Aluminum Bronze Rod, Bar, and ShapesC61300, C61400, C62300, C62400, C63000, C63200, C64200Current
ASTM B151Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and BarC70600, C71500, C74500, C75200, C76200, C77000Current
ASTM B152Copper Sheet, Strip, Plate, and Rolled BarC10100, C10200, C10300, C10800, C11000, C12000, C12200, C14200Current
ASTM B159Phosphor Bronze WireC50500, C51000, C51100, C52100, C52400Current
ASTM B169Aluminum Bronze Sheet, Strip, and Rolled BarC61000, C61300, C61400, C62300, C63000, C63200, C64200Current
ASTM B171Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat ExchangersC28000, C36500, C44300, C46400, C61400, C63000, C70600, C71500 …Current
ASTM B187Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and ShapesC10100, C10200, C11000, C11300, C12000Current
ASTM B188Seamless Copper Bus Pipe and TubeC10200, C11000, C12000Current
ASTM B194Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled BarC17000, C17200, C17300Current
ASTM B196Copper-Beryllium Alloy Rod and BarC17000, C17200, C17300Current
ASTM B197Copper-Beryllium Alloy WireC17200, C17000, C17300Current
ASTM B206Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy WireC74500, C75200, C77000Current
ASTM B224Standard Classification of CoppersC10100, C10200, C11000, C12200Current
ASTM B248General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled BarC11000, C12200, C26000Current
ASTM B249General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and ForgingsC11000, C36000, C46400Current
ASTM B250General Requirements for Wrought Copper Alloy WireC11000, C26000Current
ASTM B251General Requirements for Wrought Seamless Copper and Copper-Alloy TubeC12200, C23000, C26000Current
ASTM B280Seamless Copper Tube for Air Conditioning and Refrigeration Field ServiceC12200Current
ASTM B283Copper and Copper-Alloy Die Forgings (Hot-Pressed)C11000, C37700, C46400, C48500, C64200, C67500, C62300, C65500Current
ASTM B301Free-Cutting Copper Rod, Bar, Wire, and ShapesC14500, C14700, C18700Current
ASTM B302Threadless Copper Pipe, Standard SizesC12200Current
ASTM B306Copper Drainage Tube (DWV)C12200Current
ASTM B315Seamless Copper Alloy Pipe and TubeC61300, C61400, C65500, C70600, C71500Current
ASTM B359Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral FinsC10200, C12000, C12200, C19200, C23000, C44300, C70600, C71500Current
ASTM B370Copper Sheet and Strip for Building ConstructionC11000, C12200Current
ASTM B371Copper-Zinc-Silicon Alloy RodC69300, C69400Current
ASTM B372Seamless Copper and Copper-Alloy Rectangular Waveguide TubeC10200, C10100, C11000, C23000, C26000Current
ASTM B395U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser TubesC10200, C12200, C23000, C44300, C70600, C71500Current
ASTM B402Title not confirmedTo confirm
ASTM B411Copper-Nickel-Silicon Alloy Rod and BarCurrent
ASTM B432Copper and Copper Alloy Clad Steel PlateCurrent
ASTM B447Welded Copper TubeC10200, C12200Current
ASTM B453Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and ShapesC34500, C35300, C36000, C37700Current
ASTM B455Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded ShapesC38500Current
ASTM B465Copper-Iron Alloy Plate, Sheet, Strip, and Rolled BarC19400, C19200, C19500Current
ASTM B466Seamless Copper-Nickel Pipe and TubeC70600, C71500Current
ASTM B467Welded Copper-Nickel PipeC70600, C71500Current
ASTM B534Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled BarC17500, C17510Current
ASTM B543Welded Copper and Copper-Alloy Heat Exchanger TubeC44300, C70600, C71500, C68700Current
ASTM B552Seamless and Welded Copper–Nickel Tubes for Water Desalting PlantsC70600, C71500Current
ASTM B570Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17000 and C17200)C17200, C17000Current
ASTM B601Temper Designations for Copper and Copper Alloys—Wrought and CastC11000, C17200, C26000, C36000Current
ASTM B608Welded Copper-Alloy PipeC70600, C71500Current
ASTM B747Copper-Zirconium Alloy Sheet and StripC15000Current
ASTM B762Standard Guide of Variables Sampling of Metallic and Inorganic CoatingsCurrent
ASTM B768Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and SheetC17500, C17510Current
ASTM B888Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring ContactsCurrent
EN 1652Copper and Copper Alloys: Plate, Sheet, Strip and Circles for General PurposesC11000, C12200, C26000Current
EN 12163Copper and Copper Alloys: Rod for General PurposesC11000, C26000, C36000Current
EN 12164Copper and Copper Alloys: Rod for Free Machining PurposesC36000, C37700Current
EN 12449Copper and Copper Alloys: Seamless, Round Tubes for General PurposesC12200, C26000Current
EN 13601Copper and Copper Alloys: Copper Rod, Bar and Wire for General Electrical PurposesC11000, C10200Current
JIS H3100Copper and Copper Alloy Sheets, Plates and StripsC11000, C12200, C26000Current
JIS H3110Phosphor Bronze and Nickel Silver Sheets, Plates and StripsC51000, C52100, C77000Current
JIS H3250Copper and Copper Alloy Rods and BarsC11000, C36000, C46400Current
JIS H3300Copper and Copper Alloy Seamless Pipes and TubesC12200Current
MIL-A-15939Aluminum Bronze Bars, Plates, Rods, Sheets, Strips, Forgings, and Structural and Special Shaped SectionsCancelled 1960
MIL-B-892Bronze, Phosphor, Rolled or Drawn: Bars, Plated, Rods, Sheets and Strips (S/S QQ-P-330)Cancelled 1957
MIL-B-6946Bronze, Aluminum, Bar and RodCancelled 1950QQ-B-679
MIL-B-13492Brass, Leaded, Tubing, SeamlessCancelled 1954
MIL-B-15894Title not confirmed (copper alloy)Cancelled 1989ASTM B176
MIL-B-16166Title not confirmed (copper alloy)To confirm
MIL-B-16261Title not confirmed (copper alloy)To confirm
MIL-B-16541Title not confirmed (copper alloy)To confirm
MIL-B-20151Brass Plate, Rolled (Admiralty Metal) (Navy)Cancelled 1961
MIL-B-20292Title unconfirmedTo confirm
MIL-B-24059Title not confirmed (bronze)Cancelled 1983
MIL-C-50Copper Alloy Number 260 (Cartridge Brass, 70 Percent); Sheet, Strip, Plate, Bar, and DiscsC26000Cancelled 1990ASTM B19
MIL-C-947Copper-Beryllium-Alloy: Bars, Rods, Plates, Strips, and WireCancelled 1952
MIL-C-6941Copper-Beryllium, Bar Rod,and WireCancelled 1952QQ-C-530
MIL-C-6942Copper-Beryllium, Sheet and StripCancelled 1952QQ-C-533
MIL-C-11866Title not confirmed (copper alloy)To confirm
MIL-C-12166Title unconfirmedInactive for new design 2014
MIL-C-13351Copper Alloy Number 377 ForgingsC37700Cancelled 1984
MIL-C-15726Copper-Nickel Alloy, Sheet, Plate, Strip, Bar, Rod and Wire (title from memory)C70600, C71500CurrentASTM B122, ASTM B151
MIL-C-17516Copper-Silicon Alloy Rod, Wire, Shapes, Forgings, and Flat Products (Flat Wire, Strip, Sheet, Bar, and Plate)Cancelled 1961QQ-C-591
MIL-C-19311Copper Chromium Alloy Forgings, Wrought Rod, Bar, and Strip (Copper Alloy Numbers 182, 184, and 185)C18200Inactive for new design 2021
MIL-C-21768Title unconfirmedCancelled 1990ASTM B36
MIL-C-22087Title not confirmed (copper alloy)Cancelled 2005
MIL-C-22226Copper-Nickel-Manganese Alloy Bars, Plates, and Sheets, Low Magnetic Effect (For Special Purpose Tools and EquInactive for new design 2021
MIL-C-24679Title not confirmed (copper alloy)Current
MIL-C-46087Title not confirmed (copper alloy)Cancelled 1985ASTM B441
MIL-C-50709Copper-Base Sintered Bars (Oil Impregnated)Cancelled 2010ASTM B438
MIL-C-81021Copper-Beryllium Alloy (Copper Alloy Numbers C17500 and C17510), StripC17500, C17510Cancelled 2005SAE-AS-81021
MIL-F-55561Foil, Copper, Cladding for Printed Wiring BoardsCancelled 1981
MIL-N-15821Nameplates, BrassCancelled 1951
MIL-R-24006Rods, Ground, Copper-Clad Steel, Galvanized Steel, and CopperCancelled 1964
MIL-S-1255Stakes and Plates (bench), Coppersmiths , Tinsmiths , and Sheet-Metal-WorkersCancelled 1964
MIL-T-873Tubes, Copper, Seamless, 6,000 Psi Maximum PressureCancelled 1959WW-T-797
MIL-T-3235Tube, Copper, Seamless (for Torpedo Use)Cancelled 1997
MIL-T-3595Tubing, Phosphor Bronze: (CDA No. 510) Round, SeamlessInactive for new design 2024
MIL-T-6013Tubing, Copper-Silicon-Manganese, Round, Seamless, Annealed, Hydraulic Systems (navy)Cancelled 1955
MIL-T-6945Tubing, Brass SeamlessCancelled 1999ASTM B135
MIL-T-8231Tubes: Copper-Silicon-Bronze, Seamless, for AircraftCancelled 1993
MIL-T-15005Tube, Copper-Nickel (title not confirmed)C70600, C71500Current
MIL-T-16420Tube, Copper-Nickel Alloy, Seamless and Welded (title from memory)C70600, C71500CurrentASTM B466
MIL-T-16992Tube, Aluminum-Brass Arsenical (copper Alloy No. 687), Condenser and Heat ExchangerC68700Cancelled 1962
MIL-T-17011Tubes, Copper, Condenser and Heat ExchangerCancelled 1953
MIL-T-17379Tubing, Aluminum Bronze, Seamless and WeldedCancelled 1961
MIL-T-20168Tubes, Brass, SeamlessCancelled 1993ASTM B43
MIL-T-20219Title unconfirmedCurrent
MIL-T-22214Tube, Condenser and Heat Exchanger with Integral Fins (UNS Alloy Nos. C17500, C70600, C12200)C17500, C70600, C12200Current
MIL-T-24107Tube, Copper (Seamless) (Copper Alloy Numbers C10100, C10200, C10300, C10800, C12000, C12200, and C14200)C10100, C10200, C10300, C10800, C12000, C12200, C14200Current
MIL-T-24108Tube, Condenser and Ferrule Stock, Inhibited Admiralty Metal (copper Alloy Numbers 443, 444, and 445)C44300Cancelled 1964WW-T-756
MIL-T-46072Title unconfirmedCancelled 1996
MIL-T-52069Tube, Commercial Bronze, Seamless (for Microwave Use).Cancelled 1959
MIL-W-3318Wire, Copper, and Wire, Steel, Copperclad W-154 and WS-24/UCancelled 2023
MIL-W-47056Wire, Mesh, Knitted, Steel, Copper-Clad, Tin CoatedCancelled 1980
MIL-W-47237Wire, Nickel-Iron, Low Expansion, Copper CoatedCancelled 1979
MIL-W-82598Wire, Copper-Cadmium AlloyCancelled 2024
QQ-A-354Aluminum-Alloy (al-24) (aluminum-Copper-Magnesium (1.50%)-Manganese); Bars, Rods, Shapes, and WireCancelled 1953QQ-A-225/6
QQ-A-361Aluminum-Alloy (aluminum-Surfaced) (al-17c2), (aluminum-Copper-Magnesium-Manganese); Plates, Sheets, and StripCancelled 1947QQ-A-362
QQ-A-620Aluminum Bronze, Plate, Bar, Sheet, and StripCancelled 1964QQ-C-450
QQ-A-630Aluminum Bronze Bars Bars, Rods, Shapes, Drawn Strip. and ForgingsCancelled 1961QQ-B-679
QQ-B-611Title unconfirmedCancelled 1955
QQ-B-613Brass, Leaded and Non-Leaded: Flat Products (Plate, Bar, Sheet, and Strip)C26000, C28000, C23000, C35300Cancelled 1991 (still common)
QQ-B-626Brass, Leaded and Non-Leaded: Rod, Shapes, Forgings, and Flat Products with Finished Edges (Bar and Strip)C36000, C37700, C46400Cancelled 1991 (still common)ASTM B121, ASTM B36, ASTM B16, ASTM B16
QQ-B-636Brass, Naval, Leaded and Non-Leaded; Rods, Bars, Shapes, and ForgingsCancelled 1957QQ-N-35
QQ-B-637Brass, Naval: Rod, Bar, Wire, Shapes, Forgings (title from memory)C46400Cancelled 1993ASTM B21
QQ-B-638Brass, Naval, Leaded and Non-Leaded; Plate, Rolled Bar, Sheet, and StripCancelled 1957
QQ-B-639Brass, Naval: Flat Products (Plate, Bar, Sheet, and Strip)C46400Current
QQ-B-650Brazing Alloys (filler metal; out of scope, kept for completeness)To confirm
QQ-B-663Bronze, Aluminum, Rod, Bar, Shape and ForgingCancelled 1958QQ-A-630
QQ-B-666Bronze, Aluminum, Bars, Plates, Rods, Shapes, Sheets, and Strips (S/S by QQ-B-663 and QQ-B-667Cancelled 1958
QQ-B-667Bronze, Aluminum, Plate, Rolled Bar, Sheet, and StripCancelled 1959QQ-A-620
QQ-B-671Brass (title not confirmed)Cancelled 1967QQ-C-390
QQ-B-675Brass; Leaded and Nonleaded: Flat Products (title from memory)Cancelled 1991ASTM B30
QQ-B-679Bronze, Aluminum, Rod, Flat Products with Finished Edges (Flat Wire, Strip, and Bar), Shapes, and ForgingsCancelled 1967QQ-C-465
QQ-B-721Bronze, Manganese; Bars, Forgings, Plates, Rods, and ShapesCancelled 1955QQ-M-80
QQ-B-728Title not confirmedCancelled 2007ASTM B138
QQ-B-746Bronze, Phosphor; Bars, Plates, Rods, Shapes, Sheets, and StripsCancelled 1955QQ-P-330
QQ-B-750Bronze, Phosphor: Bar, Plate, Rod, Sheet, Strip, Flat Wire, and Structural and Special Shaped SectionsC51000, C52100, C52400, C54400Cancelled 1990ASTM B139
QQ-B-825Bus Bar: Copper, Aluminum, or Aluminum-AlloyCancelled 1977
QQ-C-395Copper Alloy Cast BarCancelled 1967QQ-C-390
QQ-C-450Copper-Beryllium Alloy (Copper Alloy Numbers 170 and 172) (title from memory)C17200Current
QQ-C-465Copper-Aluminum Alloys (Aluminum Bronze): Rod, Flat Products with Finished Edges, Shapes and ForgingsC61400, C62300, C63000, C64200Cancelled 1988ASTM B124, ASTM B150, ASTM B169
QQ-C-501Copper; Bars, Plates, Rods, Shapes, Sheets, and StripsCancelled 1952
QQ-C-502Title unconfirmedCancelled 1991
QQ-C-504Copper, Bus Bars (Including Bars, Rods, and Shapes)Cancelled 1964QQ-B-825
QQ-C-530Copper-Beryllium Alloy Bars, Rods, and Wire (title paraphrased)C17200, C17000Cancelled 1991 (still common)ASTM B196, ASTM B197
QQ-C-533Copper-Beryllium Alloy Strip (title paraphrased)C17200Cancelled 1988 (still common)ASTM B194
QQ-C-576Copper Flat Products with Slit, Slit and Edge-Rolled, Sheared, Sawed, or Machined Edges (Plate, Bar, Sheet, and Strip)C10200, C11000, C12200Cancelled 1991 (still common)ASTM B152
QQ-C-585Title not confirmedCancelled 1991ASTM B122
QQ-C-586Copper-Nickel-Zinc Alloy; Rod, Shapes and Flat Products with Finished Edges (Flat Wire, Strip, and Bar)Cancelled 1991ASTM B122, ASTM B151, ASTM B151, ASTM B206
QQ-C-591Title not confirmedCancelled 1991ASTM B98, ASTM B98, ASTM B99, ASTM B99, ASTM B105
QQ-C-825Title unconfirmedTo confirm
QQ-M-80Manganese Bronze Bars, Plates, Rods, Sheets, Strips, Flat Wire, Forgings, and Structural and Special Shaped SeCancelled 1955QQ-B-728
QQ-N-30Naval Brass; Plate, Rolled Bar, Sheet and StripCancelled 1961QQ-B-639
QQ-N-35Naval Brass; Rods, Bars, Wire, Shapes and Forgings and Flat Products with Finished EdgesCancelled 1961QQ-B-637
QQ-N-321Nickel-Silver (German Silver); Bars, Plates, Rods, Shapes, Sheets, and StripsCancelled 1954
QQ-P-330Phosphor Bronze Bars, Plates, Rods, Sheets, Strips, Flat Wire, and Structural and Special Shaped SectionsCancelled 1961QQ-B-750
QQ-W-321Wire, Brass (title paraphrased)C26000, C27000Cancelled 1992 (still common)ASTM B134, ASTM B159, ASTM B159, ASTM B206
QQ-W-321/3Bar, Metal, Flat, Copper Alloy 240Cancelled 1997
QQ-W-321/6Bar, Metal, Flat, Copper Alloy 260Cancelled 1997ASTM B134
QQ-W-321/9Bar, Metal, Flat, Copper Alloy 270Cancelled 1997ASTM B134
QQ-W-336Wire; Copper, Hard-DrawnCancelled 1960QQ-W-343
QQ-W-339Wire; Copper, Medium-Hard DrawnCancelled 1960QQ-W-343
QQ-W-340Wire, Copper-Nickel-Zinc Alloy (Copper Alloy Numbers 745, 752, 757, 764, 770 and 794)C74500Cancelled 1967QQ-W-321
QQ-W-341Wire; Copper, Soft or AnnealedCancelled 1960QQ-W-343
QQ-W-401Wire, Round, Copper Alloy Number 510 (Phosphor-Bronze A) SpringC51000Cancelled 1967QQ-W-321
SAE J461Wrought and Cast Copper AlloysC26000, C36000, C11000To confirm
SAE J463Wrought Copper and Copper AlloysC26000, C36000, C11000To confirm
Copper alloys, cast: 76 specs
SpecTitleAlloysStatusReplaced by
AMS 4511Copper-Beryllium Alloy Castings 97Cu - 2.1Be - 0.52(Co + Ni) - 0.28Si Solution and Precipitation Heat Treated (TFOO)C82500Likely current
AMS 4842Castings, Leaded Bronze, Sand and Centrifugal 80CU - 10SN - 9.5PB as CastC93700Current
AMS 4845Tin Bronze Castings, Sand and Centrifugal 87.5CU - 10SN - 2ZN as CastC90500Current
AMS 4855Leaded Red Brass, Sand and Centrifugal Castings 85CU - 5.0SN - 5.0PB - 5.0ZN as CastC83600Current
AMS 4860Manganese Bronze, Sand and Centrifugal Castings 58CU - 39ZN - 1.2FE - 1.0AL - 0.80mn as CastC86500Current
AMS 4862Manganese Bronze, Sand and Centrifugal Castings 63CU - 24ZN - 6.2AL - 3.8MN - 3.0FE High Strength, as CastC86300Current
AMS 4863Copper-Nickel-Tin Alloy Castings Cu 15Ni 8Sn Hot Isostatically Pressed, Solution Annealed and Spinodal Heat TreatedC96900Likely current
AMS 4870Aluminum Bronze, Centrifugal and Chill Castings 85Cu - 11Al - 3.6Fe As CastC95420Likely current
AMS 4871Aluminum Bronze, Centrifugal and Chill Castings 85Cu - 11Al - 3.6Fe Solution Heat Treated and Tempered (Stabilized Type)C95420Stabilized 2015
AMS 4873Aluminum Bronze Alloy Sand Castings 85Cu - 11Al - 3.6Fe Solution Heat Treated and TemperedC95420Likely current
AMS 4880Aluminum Bronze Alloy, Centrifugal and Continuous-Cast Castings 81.5Cu - 10.3Al - 5.0Ni - 2.8Fe Quench HardeneC95500Current
AMS 4881Nickel-Aluminum-Bronze, Martensitic, Sand, Centrifugal and Continuous Castings 78Cu - 11Al - 5.1Ni - 4.8Fe Quench Hardened and Temper AnnealedC95520Likely current
AMS 4890Copper-Beryllium Alloy Castings 97Cu - 2.1Be - 0.52Co - 0.28Si Solution Heat Treated (TB00)C82500Likely current
AMS 7322Rings, Sealing, Cast Tin Bronze 80Cu - 19Sn As CastC91300Likely current
ASME SB-61Steam or Valve Bronze CastingsC92200Current
ASME SB-62Composition Bronze or Ounce Metal CastingsC83600Current
ASME SB-148Aluminum-Bronze Sand CastingsC95200, C95400, C95500, C95800Current
ASME SB-271Copper-Base Alloy Centrifugal CastingsC95400, C95800Current
ASME SB-369Copper-Nickel Alloy CastingsC96200, C96400Current
ASME SB-505Copper Alloy Continuous CastingsC93200, C95400Current
ASME SB-584Copper Alloy Sand Castings for General ApplicationsC83600, C93200, C95400, C95800Current
ASTM B22Bronze Castings for Bridges and TurntablesC86300, C90500, C91100, C91300Current
ASTM B30Copper Alloys in Ingot and Other Remelt FormsCurrent
ASTM B61Steam or Valve Bronze CastingsC92200Current
ASTM B62Composition Bronze or Ounce Metal CastingsC83600Current
ASTM B148Aluminum-Bronze Sand CastingsC95200, C95300, C95400, C95410, C95500, C95600, C95700, C95800 …Current
ASTM B176Copper-Alloy Die CastingsC85800, C86500, C87800Current
ASTM B271Copper-Base Alloy Centrifugal CastingsC83600, C86300, C90300, C90500, C92200, C93200, C93700, C95200 …Current
ASTM B369Copper-Nickel Alloy CastingsC96200, C96400, C96300, C96600Current
ASTM B427Gear Bronze Alloy CastingsC90700, C91000Current
ASTM B505Copper Alloy Continuous CastingsC83600, C84400, C86300, C90300, C92200, C93200, C93700, C93800 …Current
ASTM B584Copper Alloy Sand Castings for General ApplicationsC83600, C84400, C86100, C86200, C86300, C86500, C87300, C87500 …Current
ASTM B763Copper Alloy Sand Castings for Valve ApplicationsC83600, C84400, C86300, C87600, C90300, C92200, C93200, C95400 …Current
ASTM B806Copper Alloy Permanent Mold Castings for General ApplicationsCurrent
ASTM B824General Requirements for Copper Alloy CastingsCurrent
EN 1982Copper and Copper Alloys: Ingots and CastingsCurrent
JIS H5111Bronze CastingsTo confirm
JIS H5120Copper and Copper Alloy CastingsCurrent
MIL-B-6947Bronze, Aluminum, Castings AircraftCancelled 1954QQ-B-671
MIL-B-11553Bronze Castings, Continuous CastCancelled 1966QQ-C-390
MIL-B-16033Bronze, Aluminum, CastingsCancelled 1962QQ-C-390
MIL-B-16358Bronze, Copper-Lead-Phosphorus, Casting (S/S QQ-C-390)Cancelled 1952
MIL-B-16443Bronze, Manganese, Casting ()Canceled. Use QQ-B-726D, Class A.()Cancelled 1960QQ-B-726
MIL-B-16444Bronze, Hydraulic (Ounce Metal). CastingCancelled 1961QQ-C-390
MIL-B-16522Bronze, Aluminum-Manganese, CastingsCancelled 1955
MIL-B-16540Bronze, Phosphor: CastingCancelled 1991
MIL-B-17511Brass, Naval: CastingCancelled 1959QQ-B-621
MIL-B-17512Brass, Castings (Navy)Cancelled 1953
MIL-B-17528Bronze Castings, Tin-NickelCancelled 1965QQ-C-390
MIL-B-17668Brass Casting, CommercialCancelled 1959QQ-B-621
MIL-B-18343Brass Castings, Leaded Semi-Red (Ornamental Bronze)Cancelled 1955QQ-L-225
MIL-B-19708Brass, High Strength, Yellow (Nickel Mananese Bronze) CastingsCancelled 1965QQ-C-390
MIL-B-23921Bronze, Nickel Aluminum Castings for Seawater ServiceCancelled 1968MIL-B-24480
MIL-B-24480Bronze, Nickel-Aluminum (UNS C95800) Castings (title from memory)C95800Current
MIL-C-17112Copper-Nickel-Zinc Alloy (Nickel-Silver): CastingsCancelled 1991
MIL-C-17324Copper-Beryllium-Alloy. Precision CastingsCancelled 1955MIL-C-22087
MIL-C-19310Copper-Chromium-Alloy CastingsCancelled 1991
MIL-C-19464Copper-Beryllium Alloy CastingsCancelled 1956QQ-C-390
MIL-C-20152Copper-Silicon-Alloy, Ingots (for Remelting)Cancelled 1951
MIL-C-20159Copper-Nickel Alloy Castings (title from memory)C96200, C96400Cancelled 1991ASTM B369
MIL-C-22229Copper Base Alloy Castings (for Pressure Tight Applications)Cancelled 1991
MIL-C-81519Casting, Copper Alloy (CDA NO. 717) (Copper-Nickel-Beryllium)Cancelled 1989
QQ-B-691Bronze; CastingsCancelled 1957QQ-L-225
QQ-B-701Bronze; IngotsCancelled 1955QQ-C-525
QQ-B-726Bronze Castings, Manganese and Aluminum-ManganeseCancelled 1967QQ-C-390
QQ-B-731Bronze, Manganese, and Manganese-Aluminum; Ingots (for Remelting)Cancelled 1955QQ-C-523
QQ-B-1005Bronze Castings, Leaded Tin and High Leaded TinCancelled 1967QQ-C-390
QQ-C-390Copper Alloy Castings (Including Cast Bar)C83600, C86500, C90300, C93200, C95400, C95500Cancelled 1993ASTM B584, ASTM B505
QQ-C-400Copper-Base Alloy Centrifugal CastingsCancelled 1967QQ-C-390
QQ-C-521Copper IngotCancelled 1991ASTM B5, ASTM B216
QQ-C-523Copper Alloy Ingots, Brass (Yellow, High Strength) Manganese and Manganese Aluminum Bronze (for Remelting)Cancelled 1997ASTM B30
QQ-C-525Copper Alloy Ingots (leaded and Nonleaded Tin Bronze, Red Brass, and Semi-Red Brass)Cancelled 1991ASTM B30
QQ-C-551Copper-Nickel-Alloy ; CastingsCancelled 1956QQ-N-288
QQ-C-593Copper-Silicon Alloy CastingsCancelled 1967QQ-C-390
QQ-L-225Leaded Tin Bronze Castings and High Leaded Tin Bronze CastingsCancelled 1966QQ-B-1005
SAE J462Cast Copper AlloysC93200, C93700, C93800, C83600To confirm
Magnesium: 78 specs
SpecTitleAlloysStatusReplaced by
AMS 4350Magnesium Alloy, Extrusions 6.5A1 - 0.95Zn (AZ61A-F) As ExtrudedAZ61ALikely current
AMS 4352Magnesium Alloy Extrusions 5.5Zn - 0.45Zr (ZK60A - T5) Precipitation Heat TreatedZK60ALikely current
AMS 4362Forgings, Magnesium Alloy 5.5Zn - 0.45Zr (ZK60A-T5) Precipitation Heat TreatedZK60ALikely current
AMS 4371Magnesium Alloy Plate 4.0Y - 2.25Nd - 0.5Zr (WE43C - T5) Precipitation Heat TreatedWE43CLikely current
AMS 4375Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (az31b-0) Annealed and RecrystallizedAZ31BCurrent
AMS 4376Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (az31b-H26) Cold Rolled and Partially AnnealedAZ31BCurrent
AMS 4377Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (az31b-H24) Cold Rolled, Partially AnnealedAZ31BCurrent
AMS 4382Magnesium Alloy, Plate, Extra Flat 3.0Al 1.0Zn 0.20Mn (AZ31B-0) AnnealedAZ31BLikely current
AMS 4386Magnesium Alloy Sheet and Plate 14LI - 1.25AL (LA 141A-T7)LA141ACancelled 2016
AMS 4388Magnesium Alloy Extrusions 3.OTH - 1.5MN (HM31A-F) as ExtrudedHM31ACancelled 2010
AMS 4417Castings, Sand, Magnesium Alloy 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21 - T6) Solution and Precipitation Heat TreatedLikely current
AMS 4418Magnesium Alloy, Sand Castings 2.5Ag - 2.1Di - 0.70Zr (QE22A-T6) Solution and Precipitation Heat TreatedQE22ALikely current
AMS 4420Magnesium Alloy Castings, Sand 6Al - 3Zn (AZ63A-F) As CastAZ63ALikely current
AMS 4424Magnesium Alloy Castings, Sand 6.0Al - 3.0Zn (AZ63-T6) Solution and Precipitation Heat TreatedAZ63ALikely current
AMS 4425Magnesium Alloy Castings, Sand 5.8Zn - 2.5RE - 0.70Zr (ZE63-T6) Solution and Precipitation Heat TreatedZE63ALikely current
AMS 4426Castings, Sand, Magnesium Alloy 5.1Y - 3.0Re - 0.70Zr (WE54A - T6) Solution and Precipitation Heat TreatedWE54, WE54ALikely current
AMS 4427Magnesium Alloy Castings, Sand 4.0Y - 2.3Nd - 0.7Zr (WE43B - T6) Solution and Precipitation Heat TreatedWE43BLikely current
AMS 4429Magnesium Alloy, Sand Castings 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A - T6) Solution and Precipitation Heat TreatedEV31ALikely current
AMS 4434Magnesium Alloy Castings, Sand 9.0Al - 2.0Zn (AZ92-T6) Solution and Precipitation Heat TreatedAZ92ALikely current
AMS 4437Magnesium Alloy Castings, Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and AgedAZ91B, AZ91CLikely current
AMS 4439Magnesium Alloy Castings 4.2Zn - 1.2 Rare Earths - 0.7Zr (ZE41A-T5) Precipitation Heat TreatedZE41ALikely current
AMS 4442Magnesium Alloy, Sand Castings 3.2 Rare Earths - 2.5Zn - 0.70Zr (EZ33A-T5) Precipitation Heat TreatedEZ33ALikely current
AMS 4443Magnesium Alloy Sand Castings 4.5Zn - 0.75Zr (ZK51A-T5) Precipitation Heat TreatedZK51ALikely current
AMS 4444Magnesium Alloy Castings, Sand 6.0Zn - 0.80Zr (ZK61A-T5) Precipitation Heat TreatedZK61ALikely current
AMS 4446Magnesium Alloy, Sand Castings 8.7Al - 0.70Zn - 0.26Mn (AZ91E-T6) Solution and Precipitation Heat TreatedAZ91ELikely current
AMS 4452Magnesium Alloy, Investment Castings 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6) Solution and Precipitation Heat TreatedAZ91B, AZ91CLikely current
AMS 4453Magnesium Alloy, Investment Castings 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat TreatedAZ92A, AM100ALikely current
AMS 4455Magnesium Alloy Investment Castings, AM100AAM100ATo confirm
AMS 4483Magnesium Alloy Castings, Permanent Mold 10Al (AM100A-T6) Solution and Precipitation Heat TreatedAM100ALikely current
AMS 4484Magnesium Alloy Castings, Permanent Mold 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat TreatedAZ92ALikely current
AMS 4485Magnesium Alloy Extrusions 4.0Y - 2.25Nd - 0.5Zr (WE43C - T5) Precipitation Heat TreatedWE43CLikely current
AMS 4490Magnesium Alloy Castings, Die 9.0Al - 0.70Zn (AZ91D, Temper F) As CastAZ91DLikely current
AMS 5546Steel Sheet and Strip, Corrosion and Moderate Heat Resistant 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Cold Rolled, TemperedAM350Cancelled 2005
AMS 5547Steel, Corrosion and Heat-Resistant, Sheet and Strip 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat TreatedAM355Cancelled 2023
AMS 5548Steel, Corrosion and Heat-Resistant, Sheet and Strip 16.5Cr - 4.5Ni - 2.9Mo - 0.10N 1850 to 1975 °F AnnealedAM350Current
AMS 5549Plate, Steel, Corrosion and Moderate Heat Resistant 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat TreatedAM355Cancelled 1995
AMS 5743Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated, Sub-Zero Cooled, Equalized, and Over-TemperedAM355Current
AMS 5744Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Heat Treated, 170 ksi Tensile StrengthAM355Current
AMS-S-8840Steel Sheet and Strip, Corrosion-Resistant, Precipitation Hardening (am350 and Am355), Premium QualityAM350, AM355Cancelled 2005
ASTM B80Magnesium-Alloy Sand CastingsAM100A, AZ91C, AZ91E, AZ92A, EZ33A, ZE41A, QE22A, AZ63A …Current
ASTM B90Magnesium-Alloy Sheet and PlateAZ31B, HK31A, HM21A, LA141ACurrent
ASTM B91Magnesium-Alloy ForgingsAZ31B, AZ61A, AZ80A, ZK60A, HM21A, M1ACurrent
ASTM B92Unalloyed Magnesium Ingot and Stick For RemeltingUnalloyed magnesiumCurrent
ASTM B93Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die CastingsAZ91C, AZ91D, AZ91E, AZ92A, AM100A, EZ33A, ZE41A, QE22A …Current
ASTM B94Magnesium-Alloy Die CastingsAZ91D, AM50A, AM60B, AM60A, AS41B, AZ91A, AZ91B, AS41ACurrent
ASTM B107Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and WireAZ31B, AZ61A, AZ80A, ZK60A, HM31A, M1ACurrent
ASTM B199Magnesium-Alloy Permanent Mold CastingsAM100A, AZ91C, AZ91E, AZ92A, EZ33A, AZ81A, AZ63ACurrent
ASTM B296Temper Designations of Magnesium Alloys, Cast and WroughtAZ31B, AZ91E, ZK60ACurrent
ASTM B403Magnesium-Alloy Investment CastingsAZ91C, AZ92A, AM100A, EZ33A, ZE41ACurrent
ASTM B843Magnesium Alloy Anodes for Cathodic ProtectionAZ63B, M1C, AZ31BCurrent
ASTM B951Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and WroughtAZ31B, AZ91D, WE43Current
EN 1753Magnesium and magnesium alloys: Magnesium alloy ingots and castingsAZ91D, AM60B, AM50A, AZ91ECurrent
MIL-A-12033Aluminum-Zinc-Magnesium Alloys and CastingsCancelled 1952
MIL-C-19163Casting, Shell, Magnesium (Special)Cancelled 1955
MIL-C-48808Castings, Sand, Aluminum Base and Magnesium Base (for Special Weapons Application)Cancelled 1989
MIL-F-46048Floor Plate, Raised Pattern, Magnesium Alloy (AZ31B), RolledAZ31BCancelled 1997
MIL-M-5354Magnesium Alloy ZK60A Extruded Bars, Rods, and ShapesZK60ACancelled 1955
MIL-M-8916Magnesium Alloy: (title unconfirmed)HK31ACancelled 1992AMS 4389
MIL-M-8917Magnesium Alloy Sheet and Plate (HM21A)HM21ACancelled 1993AMS 4383
MIL-M-20161Magnesium Ingots and Magnesium SticksCancelled 1979
MIL-M-26075Magnesium-Alloy Sheet and Plate (HK31A)HK31ACancelled 1988
MIL-M-26696Magnesium Alloy Castings: (title unconfirmed)ZE63A, EZ33ACancelled 1988
MIL-M-45207Magnesium Alloy (KIA), Sand CastingsCancelled 1979
MIL-M-46037Magnesium Alloy Plate and Sheet (ze10a)ZE10ACancelled 1980
MIL-M-46039Magnesium Alloy Bar, Rod, and Special Shaped Sections, Extruded (ZK21A)ZK21ACancelled 1992AMS 4387
MIL-M-46062Magnesium Alloy: (title unconfirmed)Magnesium tooling plateCancelled 1996
MIL-M-46130Magnesium-Lithium Alloy Plate, Sheet and Forgings (LA141A, LS141A and LZ145A)LA141ACancelled 2016
MIL-M-46143Magnesium Lithium Alloy Castings (ls141a and Lz145a)Cancelled 1988
MIL-S-8840Steel Sheet and Strip, Corrosion-Resistant, Precipitation Hardening (AM350 and AM355), Premium QualityAM350, AM355Cancelled 1999AMS-S-8840
MIL-T-855Tubing, Aluminum-Alloy (aluminum-Magnesium-Silicon-Chromium), Drawn (A1-61-S), SeamlessCancelled 1951WW-T-789
MIL-T-38749Tooling Plate, Magnesium AlloyCancelled 1978
QQ-M-31Magnesium Alloy: Rolled Bars and Shapes, Extruded Bars, Rods, Shapes, Tubes and WireAZ31B, AZ61A, AZ80A, ZK60ACancelled 1990ASTM B107
QQ-M-38Magnesium Alloy Die Castings (az91a)AZ91ACancelled 1993ASTM B94
QQ-M-40Magnesium Alloy: Plate and SheetAZ31B, HK31A, HM21ACancelled 1993ASTM B91, ASTM B661
QQ-M-44Magnesium Alloy: ForgingsAZ31B, AZ61A, AZ80A, ZK60ACancelled 1990
QQ-M-54Magnesium Alloy (1.5 Manganese); Plate and SheetCancelled 1962QQ-M-44
QQ-M-55Magnesium Alloy (federal, subject unconfirmed)AZ91C, AZ92ACancelled 1990ASTM B199
QQ-M-56Magnesium Alloy (federal, subject unconfirmed)AZ91C, AM100ACancelled 1990ASTM B80
Zinc: 20 specs
SpecTitleAlloysStatusReplaced by
AMS 4803Zinc Alloy Castings, Die 4.0Al - 0.04Mg (AG40A) As CastZamak 3Likely current
AMS-I-7068Ingot, Zinc Alloy (for Sheet Metal Forming Dies)Current
ASTM B6ZincSlab zincCurrent
ASTM B69Rolled ZincRolled zincCurrent
ASTM B86Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die CastingsZamak 2, Zamak 3, Zamak 5, Zamak 7, ZA-8, ZA-12, ZA-27Current
ASTM B240Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die CastingsZamak 2, Zamak 3, Zamak 5, Zamak 7, ZA-8, ZA-12, ZA-27Current
ASTM B418Cast and Wrought Galvanic Zinc AnodesZinc anode Type ICurrent
ASTM B791Zinc (title unconfirmed)B791 Zinc alloyTo confirm
ASTM B792Zinc Alloys in Ingot Form for Slush CastingGalvanizing zinc alloyCurrent
ASTM B833Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of SteelZinc spray wireCurrent
ASTM B989High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die CastingsB989 Zinc alloyCurrent
MIL-A-18001Anodes, Corrosion Preventive, Zinc; Slab, Disc and Rod ShapedZinc anodeTo confirm
MIL-I-7068Ingot, Zinc Alloy (for Sheet Metal Forming Dies)Cancelled 1999AMS-I-7068
MIL-I-20149Iron, Wrought, Sheet, Black and Zinc Coated (Galvanized)Cancelled 1960
MIL-Z-883Zinc: Plates, Rods, Sheets and StripsCancelled 1957QQ-Z-301, MIL-A-18001
MIL-Z-16460Zinc Base Alloy, Sand CastingsCancelled 1952
QQ-Z-100Zinc Alloy Sheet and StripCancelled 1977
QQ-Z-301Zinc Sheet and StripCancelled 1988ASTM B69
QQ-Z-351Zinc, Slab, SpelterCancelled 1975ASTM B6
QQ-Z-363Zinc Alloy: (title unconfirmed; believed rolled zinc sheet/strip/plate)Rolled zincCancelled 1992ASTM B86
Refractory metals: 66 specs
SpecTitleAlloysStatusReplaced by
AMS 7725Tungsten Alloy Shapes, Sintered, High DensityTungsten heavy alloy Class 2Current
AMS 7819Molybdenum Alloy Bars 0.48Ti - 0.09Zr - 0.02C Arc Cast, Stress RelievedMo-0.5TiLikely current
AMS 7847Tantalum Alloy Sheet, Strip, and Plate 90Ta - 10WTa-10WLikely current
AMS 7848Tantalum Alloy Bars and Rods 90Ta - 10WTa-10WLikely current
AMS 7849Tantalum Sheet, Strip, and Plate AnnealedLikely current
AMS 7850Columbium (Niobium) Sheet, Strip, and FoilLikely current
AMS 7851Columbium (Niobium) Alloy Foil, Sheet, Strip, and Plate 10W - 2.5Zr RecrystallizedLikely current
AMS 7852Columbium (Niobium) Alloy Sheet, Strip, and Plate, 10Hf - 1.0TiNb-47TiLikely current
AMS 7855Columbium (Niobium) Alloy Bars, Rods, and Wire 10W - 2.5Zr RecrystallizedLikely current
AMS 7857Columbium (Niobium) Alloy Bars, Rods, and Extrusions 10Hf - 1.0Ti, Recrystallization AnnealedNb-47TiLikely current
AMS-T-21014Tungsten Base Alloy (SAE adoption of MIL-T-21014; title approximate)Tungsten heavy alloy Class 1, Tungsten heavy alloy Class 2, Tungsten heavy alloy Class 3, Tungsten heavy alloy Class 4To confirm
ASTM B364Tantalum and Tantalum Alloy IngotsTantalum, Ta-2.5W, Ta-10W, Ta-40NbCurrent
ASTM B365Tantalum and Tantalum Alloy Rod and WireTantalum, Ta-2.5W, Ta-10W, Ta-40NbCurrent
ASTM B386Molybdenum and Molybdenum Alloy Plate,Sheet, Strip, Foil, and RibbonMolybdenum, TZM, Mo-0.5TiCurrent
ASTM B387Molybdenum and Molybdenum Alloy Bar, Rod, and WireMolybdenum, TZM, Mo-0.5TiCurrent
ASTM B391Niobium and Niobium Alloy IngotsNiobium, Nb-1ZrCurrent
ASTM B392Niobium and Niobium Alloy Bar, Rod, and WireNiobium, Nb-1ZrCurrent
ASTM B393Niobium and Niobium Alloy Strip, Sheet, and PlateNiobium, Nb-1ZrCurrent
ASTM B394Niobium and Niobium Alloy Seamless and Welded TubesNiobium, Nb-1ZrCurrent
ASTM B521Tantalum and Tantalum Alloy Seamless and Welded TubesTantalum, Ta-2.5W, Ta-10W, Ta-40NbCurrent
ASTM B708Tantalum and Tantalum Alloy Plate, Sheet, and StripTantalum, Ta-2.5W, Ta-10W, Ta-40NbCurrent
ASTM B760Tungsten Plate, Sheet, and FoilTungstenCurrent
ASTM B777Tungsten Base, High-Density MetalTungsten heavy alloy Class 1, Tungsten heavy alloy Class 2, Tungsten heavy alloy Class 3, Tungsten heavy alloy Class 4Current
ASTM B884Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting ApplicationsNb-47TiCurrent
ASTM F560Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)TantalumCurrent
MIL-C-3965/2Capacitor, Fixed, Nonsolid Electrolytic, (Tantalum), Styles CL24 and CL25 (Polarized, Etched-Tantalum-Foil, 85Cancelled 1963MIL-C-3965/17
MIL-C-3965/3Capacitor, Fixed, Nonsolid Electrolytic,(Tantalum), Styles CL34 and CL35 (Polarized, Plain-Tantalum-Foil, 85 DCancelled 1963MIL-C-3965/15
MIL-C-3965/9Capacitors, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum (Polarized, Plain Foil) 85 Degrees C (VoltageCancelled 1999
MIL-C-3965/10Capacitors, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, (Nonpolarized, Plain Foil), 85 Degrees C (VoCancelled 1999
MIL-C-3965/11Capacitors, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, (Polarized, Etched Foil), 85 Degrees C (VoltCancelled 1999
MIL-C-3965/12Capacitors, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, (Nonsolid Electrolyte), (Nonpolarized, EtcheCancelled 1999
MIL-C-3965/13Capacitor, Fixed, Nonsolid Electrolytic, (Tantalum), Styles CL26 and CL27 (Nonpolarized, Etched-Tantalum-Foil,Cancelled 1963MIL-C-3965/18
MIL-C-3965/14Capacitors, Fixed, Nonsolid Electrolytic, (Tantalum), Styles CL36 and CL37 (Nonpolarized, Plain-Tantalum-Foil,Cancelled 1968MIL-C-3965/16
MIL-C-3965/15Capacitors, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, (Polarized, Plain Foil) -85 Degrees C (VoltaCancelled 1999
MIL-C-3965/16Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, (Nonpolarized, Plain Foil) - 85 Degrees C (VoCancelled 1999
MIL-C-3965/17Capacitor, Fixed, electrolytic (Nonsolid Electrolyte), Tantalum, (Polarized, Etched Foil) - 85 Degrees C (VoltCancelled 1999
MIL-C-3965/18Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, (Nonpolarized, Etched Foil) - 85 Degrees C (VCancelled 1999
MIL-C-3965/22Capacitor,Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, (Polarized, High Etched Foil) - 85 Degrees C (Cancelled 1999
MIL-C-3965/23Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte, Tantalum, (Nonpolarized, High Etched Foil) - 85 DegreesCancelled 1999
MIL-C-22032Cobalt-Chromium-Tungsten-Nickel Alloy, Bar Plate and Sheet, Low Magnetic Effect (for Special Purpose Tools andCancelled 1959
MIL-C-24615Castings, Nickel-Chromium-Molybdenum-Columbium AlloyCurrent
MIL-C-38102/5Capacitor, Fixed, Electronic, Tantalum Foil Established ReliabilityCancelled 1964MIL-C-39006/3
MIL-C-38102/6Capacitor, Fixed, Electrolytic, Tantalum Foil Established ReliabilityCancelled 1964MIL-C-39006/4
MIL-C-38102/7Capacitor, Fixed, Electrolytic, Tantalum Foil Established ReliabilityCancelled 1964MIL-C-39006/1
MIL-C-38102/8Capacitor, Fixed, Electrolytic, Tantalum Foil Established ReliabilityCancelled 1964MIL-C-39006/15
MIL-C-39006/1Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, (Polarized, Etched Foil), 85 Degrees C (VoltaCancelled 1998
MIL-C-39006/2Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, (Nonpolarized, Etched Foil), 85 Degrees C (VoCancelled 1998
MIL-C-39006/3Capacitors, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, (Polarized, Plain Foil), 85 Degrees C (VoltaCancelled 1998
MIL-C-39006/4Capacitors, Fixed, Electrolytic (Nonsolid Electrolytic, Tantalum, (Nonpolarized, Plain Foil), 85 Degrees C (VoCancelled 1998
MIL-C-39006/5Capacitors, Fixed, Nonsolid Electrolytic, Tantalum (Polarized, Etched Foil), Established Reliability, Style CLCancelled 1963MIL-C-39006/1
MIL-C-39006/6Capacitors, Fixed, Nonsolid Electrolytic, Tantalum (Nonpolarized, Etched Foil), Established Reliability, StyleCancelled 1963MIL-C-39006/2
MIL-C-39006/7Capacitors, Fixed, Nonsolid Electrolytic, Tantalum (Polarized, Plain Foil), Established Reliability, Style CLRCancelled 1963MIL-C-39006/3
MIL-C-39006/8Capacitors, Fixed, Nonsolid Electrolytic, Tantalum (Nonpolarized, Plain Foil), Established Reliability, StyleCancelled 1963MIL-C-39006/4
MIL-C-39006/11Capacitors, Fixed, Nonsolid Electrolytic, Tantalum (Polarized, Etched Foil), Established Reliability, Style CLCancelled 1963MIL-C-39006/1
MIL-C-39006/12Capacitors, Fixed, Nonsolid Electrolytic, Tantalum (Nonpolarized, Etched Foil), Established Reliability, StyleCancelled 1963MIL-C-3006/2
MIL-C-39006/13Capacitors, Fixed, Nonsolid Electrolytic, Tantalum (Polarized, Plain Foil), Established Reliability, Style CLRCancelled 1963MIL-C-39006/3
MIL-C-39006/14Capacitors, Fixed, Nonsolid Electrolytic, Tantalum (Nonpolarized, Plain Foil), Established Reliability, StyleCancelled 1963MIL-C-39006/4
MIL-C-39006/15Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, (Polarized, Etched Foil), 85 Degrees C (VoltaCancelled 1981
MIL-C-39006/16Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, (Polarized, High Etched Foil), 85 Degrees C (Cancelled 1998
MIL-C-39006/17Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, (Nonpolarized, High Etched Foil), 85 DegreesCancelled 1998
MIL-DTL-32477Rod and Bar, Cobalt-Nickel-Chromium-Iron-Molybdenum Alloy, for use in Critical Seawater ApplicationsCurrent
MIL-M-14582Molybdenum Rod, Wire, Sheet, and StripCancelled 1983
MIL-M-27524Molybdenum Sheet and StripCancelled 1961MIL-M-14582
MIL-M-47289Molybdenum, Unalloyed, Bars, Rods, Sheet, Plate, Strip Foil, and Special Jet Vane Flame Shield Quality PlateCancelled 1983
MIL-N-18088Nickel-Molybdenum-Chromium Alloy Plates, Sheets, and Strips (slit Sheets)--Corrosion and Heat ResistingCancelled 1983
MIL-T-21014Tungsten Base Alloy (title unconfirmed; heavy alloy bars, rods, plates)Tungsten heavy alloy Class 1, Tungsten heavy alloy Class 2, Tungsten heavy alloy Class 3, Tungsten heavy alloy Class 4To confirmAMS-T-21014
Other metals: 40 specs
SpecTitleAlloysStatusReplaced by
AMS 5892Alloy, Sheet and Strip 42Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low ExpansionLikely current
AMS 7720Lead Alloy Castings, 6.5Sb - 0.5SnCancelled 1995
AMS 7721Lead Alloy Sheet and Extrusions 93PB - 6.5SB - 0.50SN as FabricatedCurrent
AMS 7735Alloy Wire, Round 35Pd - 30Ag - 14Cu - 10Au - 10Pt - 0.85Zn Solution Heat TreatedLikely current
AMS 7902Beryllium Sheet and Plate 98BeBerylliumLikely current
AMS 7903Bars, Rods, Tubing, and Shapes, Beryllium, 4.25BEO - 94BE, High Micro-Yield StrengthCancelled 2006
AMS 7904Beryllium Bars, Rods, Tubing, and Shapes High Ductility GradeCurrent
AMS 7905Bars, Rods, Tubing, and Shapes, Beryllium, Optical GradeCancelled 2012
AMS 7906Beryllium Bars, Rods, Tubing, and Shapes Standard GradeBerylliumCurrent
AMS 7907Beryllium Bars, Rods, Tubing, and Shapes Instrument GradeCurrent
AMS 7908Beryllium Near-Net Preforms Standard Grade Hot Isostatic PressedBerylliumLikely current
AMS 7911Aluminum Beryllium, Preforms Hot Isostatic Pressed and Heat Treated 38Al - 62BeAl-62BeLikely current
AMS 7912Aluminum-Beryllium Alloy, Extrusions 38Al - 62Be AnnealedLikely current
AMS 7913Aluminum-Beryllium Alloy, Sheet and Plate 38A1-62BECurrent
AMS 7918Beryllium Aluminum Alloy Investment Castings 64.9Be - 30Al - 3Ag - 1Co - 0.75Ge As CastLikely current
AMS-B-8964Beryllium Sheet and Plate, General Requirements forCancelled 2010AMS 7902
AMS-L-18331Lead Alloy PigCurrent
ASTM B29Refined LeadLeadCurrent
ASTM B339Pig TinTinCurrent
ASTM B413Refined SilverSilverCurrent
ASTM B749Lead and Lead Alloy Strip, Sheet, and Plate ProductsLead, Antimonial leadCurrent
ASTM F2063Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical ImplantsNitinolCurrent
MIL-B-8964Beryllium Sheet, and Plate, General Requirements forCancelled 1999AMS-B-8964
MIL-B-21531Beryllium Shapes, Vacuum Hot PressedCancelled 1985
MIL-I-82681Ingot, Bismuth-Tin Alloy, EutecticCancelled 1991
MIL-L-18331Lead Alloy PigCancelled 1999AMS-L-18331
MIL-L-24055Lining, Lead for Steel PipeCancelled 1986
MIL-L-82893Lead FoilCancelled 2022
MIL-T-3515Tray, Silver Bath, (tilting Type, Wet Plate, Stainless Steel, 28-BY 36-INCH).Cancelled 1951
MIL-T-12076Tin, Strip and SheetCancelled 2017
MIL-U-46045Uranium Alloy, Wrought, Bars, Billets, and Tubular ShapesCancelled 1986
MIL-W-47087Wire, Molybdenum, Platinum CladCancelled 1995
MIL-W-81235Wire, Silver-AlloyCancelled 2023
MIL-Z-22124Zirconium Alloy Ingots (for Official Use Only)Cancelled 1963
QQ-C-40Calking, Lead Wool and Lead PigCurrent
QQ-F-838Fusible Alloys: Ingots and BarsCancelled 1992
QQ-I-706Iron and Steel, Sheet, Tinned (Tin and Plate)Cancelled 1956QQ-T-425
QQ-L-171Lead: (title unconfirmed)LeadCurrent
QQ-L-201Lead SheetLeadCurrent
QQ-T-371Tin, PigCancelled 1990ASTM B339

Related pages: MIL-HDBK-5 alloy and specification index, material property lookup for design allowables, multi-material comparison, and the washer size finder, which works the same way.

Reference Guide: Choosing a Material Spec
01

How to Pick the Right Spec

Four questions, in order
  1. What does the drawing or contract call out? That spec rules, even if it is cancelled. Substituting needs the design authority's approval.
  2. Which world is the part in? General industry buys to ASTM. Pressure equipment buys to ASME SA/SB (the same text as ASTM, adopted by the Boiler and Pressure Vessel Code). Aircraft buy to AMS. Defense programs may still name QQ or MIL specs.
  3. What product form? Specs are written per form. 6061 sheet, 6061 cold-finished bar and 6061 extrusion are three different specs, with different tempers and tolerances.
  4. What temper or condition? Many specs cover only some tempers. AMS 4027 covers 6061-T6 and T651 sheet and plate; for 6061-O sheet you need a different AMS number.
Industrial vs aerospace specs

An ASTM product spec usually covers many alloys and tempers in one document. An AMS spec usually covers one alloy, one form and one or two tempers. AMS specs add tighter chemistry, more testing and lot traceability, so AMS material costs more and has longer lead times.

Mills often certify one lot to several specs at once. A 304 sheet cert may list ASTM A240, ASTM A666, ASME SA-240 and AMS 5513 together. That is normal, and it is how distributors stock one product for several markets.

The navigator tells you which specs exist and what replaced what. The spec itself, at the revision your drawing names, is what you buy and inspect to.
02

Aluminum Tempers: T6 vs T651 vs T6511

The digits after T6 tell you the form

Temper designations are defined in ANSI H35.1. The extra digits after T6 (or T7, T8) say how residual stress from quenching was relieved. That step depends on the product form, so the temper often tells you the form too.

TemperMeaningTypical form
T6Solution heat-treated and artificially agedSheet, thin parts, forgings
T651T6, then stretched 1.5–3% (plate) or 1–3% (rolled or cold-finished bar)Plate, rolled and cold-finished bar
T6510T6 extrusion stretched 1–3%, not straightened afterwardsExtrusions
T6511T6 extrusion stretched 1–3%, with minor straightening allowedExtrusions (most stock bar)
T652T6, then compressed 1–5%Forgings
T73, T7351Over-aged for stress-corrosion resistance (7xxx)7075 plate, bar, forgings
OAnnealed, softestAny
H32, H34Strain-hardened and stabilized, quarter and half hard5xxx sheet and plate
Why it matters when you machine

Stretched tempers (T651, T6511) hold much less locked-in stress, so parts move far less when you machine away material. That is why stock plate is T651 and stock extruded bar is T6511, even when the drawing just says "6061-T6".

Strength is essentially the same: T651 and T6511 material is T6 material that has been stress-relieved. Many drawings accept "T6 or T6XX". If yours says only T6, check whether the stretched temper is allowed before ordering plate or bar.

Tip: filter the navigator by temper. "6061 + T6511" shows the extrusion specs only; "6061 + T651" shows plate and rolled bar.
03

Stainless Conditions and Finishes

Austenitic (300 series)
  • Annealed: the normal condition for sheet, plate and most bar. ASTM A276 calls it Condition A.
  • Cold-worked tempers: ¼, ½, ¾ and full hard sheet and strip (ASTM A666 and some AMS specs). Strength rises a lot; ductility drops.
  • Strain-hardened bar: ASTM A276 Condition B (heavily cold-drawn, high strength) and Condition S (lightly cold-worked).
  • Cold drawn vs hot finished: "cold drawn" or "cold finished" bar is drawn through a die for size and finish. It can still be annealed afterwards, so cold finished does not always mean cold worked.
Martensitic and precipitation-hardening
  • Martensitic (410, 416, 420, 440C): bought annealed for machining, then hardened and tempered. Some specs also offer a hardened and tempered condition.
  • PH (17-4PH, 15-5PH): bought in Condition A (solution treated), then aged. H900 is the strongest; H1025, H1075 and H1150 trade strength for toughness and resistance to stress corrosion.
  • Semi-austenitic (17-7PH, PH15-7Mo): Condition A is formable; TH1050 and RH950 are the hardened conditions.
Use the Finish filter for "cold finished" bar. It also catches specs that say cold drawn, cold rolled or centerless ground.
04

Steel, Titanium, Nickel and Copper Conditions

Carbon and alloy steel
  • Hot rolled vs cold finished: hot-rolled bar (ASTM A576 for carbon, A322 for alloy) has mill scale and looser size limits. Cold-finished bar (ASTM A108) is drawn, turned or ground to close size. ASTM A29 holds the general requirements for both.
  • Conditions: as rolled, annealed (softest, best for machining), normalized, spheroidized, stress relieved, and quenched and tempered (prehardened 4140, for example, is A434 or a distributor's Q&T stock).
  • Quality level: commercial, special bar quality, and aircraft quality. Aerospace AMS steel specs add cleanliness inspection (AMS 2300, 2301, 2304) and often differ only in melt practice: air melted, vacuum arc remelted (VAR) or electroslag remelted (ESR).
Titanium
  • ASTM grades: Grades 1 to 4 are commercially pure, in rising strength. Grade 5 is Ti-6Al-4V, Grade 23 is 6Al-4V ELI, Grade 9 is Ti-3Al-2.5V and Grade 7 is Ti-0.2Pd.
  • Conditions: annealed (the normal mill condition), solution treated and aged (STA, higher strength), beta annealed and duplex annealed (for fracture toughness).
  • Which family: ASTM B265, B348 and B381 for industrial sheet, bar and forgings; ASTM F67 and F136 for implants; AMS 49xx for aerospace (AMS 4911 for 6Al-4V sheet and plate, AMS 4928 for 6Al-4V bar and forgings).
Nickel and cobalt alloys
  • Annealed or solution treated: the soft, formable condition. Age-hardenable alloys (718, X-750, Waspaloy, K-500) are then precipitation hardened.
  • Separate specs per condition: aerospace specs often split one alloy by condition. For 718 bar, AMS 5662 is solution treated and AMS 5663 is solution treated and aged.
Copper alloys (ASTM B601 temper codes)
CodeMeaning
O60, O61Annealed (soft)
H01, H02, H04, H08Cold worked: quarter hard, half hard, hard, spring
TB00Solution heat treated (beryllium copper)
TD04Solution treated, then cold worked hard
TF00, TH04Precipitation hardened, without and with cold work
M01, M02, M07As cast: sand, centrifugal, continuous
Copper alloys are listed by UNS number. C36000 is free-cutting (360) brass, C11000 is electrolytic tough pitch copper, C17200 is beryllium copper and C93200 is SAE 660 bearing bronze. Search accepts the common names too.
05

Cancelled, Inactive, Superseded: What the Labels Mean

LabelMeaning
CurrentMaintained by its issuing body. Use it for new designs.
Inactive for new designStill valid for existing designs and spares, but not for new ones (DoD and MMPDS term).
Obsolete, still commonCancelled or withdrawn, but mills still certify to it and it is still widely called out on drawings.
Cancelled / Superseded / WithdrawnNo longer maintained. The cancellation notice usually names the replacement.
Likely currentAn AMS spec revised in 2010 or later that SAE has not marked stabilized. Probably active, but not confirmed: SAE's latest revision of a spec can be its cancellation notice.
Status to confirmWe have not yet confirmed the current status with the issuing body.
When a drawing calls a cancelled spec

Buy what the drawing says if you can get it: many suppliers still certify to old QQ and MIL specs. If you can't, the cancellation notice names a replacement, often an ASTM or AMS spec. A replacement is not always a perfect match. Tolerances, tempers or test lots may differ, so the design authority should approve the switch.

Status terms differ by issuer. DoD (ASSIST) uses active, inactive for new design and cancelled. ASTM withdraws standards. SAE marks some AMS specs stabilized: the content is frozen but the spec is still valid.

06

How QQ, MIL, AMS and ASTM Specs Relate

The usual chain

Federal specs (QQ-A for aluminum, QQ-S for steel, WW-T for tube) and military specs (MIL-A, MIL-S, MIL-T) were the government's material specs for decades. In 1994 the Department of Defense moved to commercial specs where it could, and most metal QQ and MIL specs were cancelled over the next decade.

Many were handed to SAE and reissued with an AMS prefix (QQ-A-250 became AMS-QQ-A-250, QQ-S-763 became AMS-QQ-S-763). Most of those adoptions were later cancelled too, in favor of ASTM specs or single-alloy AMS specs. The navigator follows each chain so you can start from any link.

Reading the numbers
  • ASTM A: ferrous (steel and stainless). ASTM B: nonferrous (aluminum, copper, nickel, titanium).
  • ASME SA-/SB-: the ASTM spec of the same number, adopted for pressure equipment.
  • AMS 4xxx: mostly light alloys (aluminum, magnesium, titanium, copper). AMS 5xxx: mostly stainless, heat-resistant and nickel alloys. AMS 6xxx: mostly carbon and alloy steels.
  • Slash sheets (QQ-A-250/11): one alloy within a general spec (QQ-A-250 is the general aluminum plate and sheet spec; /11 is 6061).
07

Sources and Verification

Where the data comes from
  • Federal and military status: ASSIST, the Department of Defense specification database. We swept every document in the metal supply classes (FSC 4710, 95xx and 96xx) and every title that names a metal and a mill form: about 1,200 material specs, active and cancelled. Specs added from that sweep take their alloy and form from the official title.
  • AMS titles and status: the DoD adoption records in ASSIST carry SAE's official titles. For the rest we use a March 2025 list of every AMS revision (about 6,500 revisions). A spec revised in 2010 or later is shown as "likely current", one SAE marked "Stabilized" as stabilized, and an older one stays "status to confirm" with its last revision year. To confirm one yourself, open the newest revision on SAE's site and read the badge beside its date (Issued, Revised, Canceled, Stabilized). The "Current" badge only means it is the newest document for that number, which can be a cancellation notice.
  • Distributor cross-check: TW Metals' published AMS stock list, used to find specs we had missed.
  • ASTM titles and withdrawals: astm.org standard pages.
  • AMS coverage: MMPDS-13 Appendix C, MIL-HDBK-5J Appendices B and C, and the specs themselves where we hold them.
  • Producer and distributor certifications for which specs are still certified in practice.
What "verified" means

Every spec lists its source in the detail panel. A spec marked "Not yet checked against the spec itself" came from an index or a secondary listing; its coverage is likely right but has not been confirmed against the document.

Spec titles and numbers are facts about the documents. The specs themselves are copyrighted by their publishers (ASTM, SAE, ASME) and are not reproduced here.

Cite This Work